The Anybus CompactCom modules are today using the Anybus NP30 processor. These modules are used for communication between industrial machines and larger network protocols. The communication loads on these systems are increasing every day and the limiting factor for the system is the processor.HMS, the company that develops the Anybus CompactCom, has shown interest for a benchmark test between the old processor and a new processor, ARM Cortex-M3. This project includes that benchmark. To be able to get results that reflect reality a test environment was created to simulate Anybus CompactCom conditions.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

This project had the aim to produce an exhibition catalogue for the ValandSchool of fine Arts (BA level). The purpose was to give the student a professionalfrontage and to visualize there exhibition concept through the catalogue.What elements, typography and shapes should be used for this purpose?How important is the physical format that the catalogue has?Through a massive sketch phase I came to see the difficulties in creating anexhibition catalogue. What type of images, shapes and expressions that couldrepresent the concept behind this specific art exhibition was hard to find.What shape should the catalogue have?The work became more than just making an exhibition catalogue, the cataloguehad to communicate the specific concept in a clear way.

In nature there are about 4,500 minerals identified. These can roughly be divided into two groups, opaque phases and non-opaque phases, with the exception that some opaque phases also may act as a non-opaque phase in different circumstances. The division is made on the basis of the optical properties. Opaque phases are nontransparent, which means that a different type of microscope must be used. A conventional microscope uses transmitted light while the microscope for opaque phases or the ore microscope uses reflected light.

Abstract: The purpose of this study was to examine the Swedish industry- and craftmanship trade, specifically the relationship between effort and reward and how it affects the meaningfulness during labour hours. Also, what are the possible effects on production efficiency as a whole? Discussed and analyzed through empirics and previous research.38 workers filled out a survey and two interviews were conducted to get a more analytic depth to the data.The results showed that there is little to no reward for high effort during labour hours on the evaluated workplaces, combined with low commitment and meaningfullness. My conclusions are that more ways of effort-based rewards would likely have a positive effect on meaningfulness and thereby the production as a whole. I also show that the theses of Karl Marx are still plausible and relevant in modern day industrial- and craftsmanship trades in capitalist countries..

SammanfattningDynaMate AB, som är ägare av DynaMate Industrial Services, är ett fristående helägt dotterbolagtill Scania CV AB. Bolaget startade sin verksamhet 1993 och då inledningsvis som enunderhållsavdelning inom och åt Scania. Under första halvåret av 2001 ombolagiserades dockDynaMate AB för att kunna erbjuda produktionsstöd även till andra kunder. Under 2009 bildades såDynaMate Industrial Services AB (DIS), där detta företag idag erbjuder specialkompetens inomautomation, el och mekanik. Med stöd av företagets kompetenser och erfarenhet av produktionsstödlöser de kundens problem från idé till färdig maskin.I Scanias regi har DynaMates uppdrag oftast vilat på enskilda konstruktörer, som då agerat bådeprojektledare, genomförare och slutförare.

When a family member is being cared for in palliative care relatives often need support to be able to support their family member. The purpose of the literature review was to illuminate the nursing staff?s support from the relatives? perspective when a family member is being cared in a late palliative phase. The study is a literature review, there already existing research are surveyed. The findings were structured into two parts, tangible- and the intangible support.

This degree project summarizes five years of education at the landscape architecture program at the Swedish University of Agriculture Sciences, SLU, Alnarp and the School of architecture at Royal Institute of Technology, KTH, Stockholm. The project has been carried out by Lovisa Berg and Per Crona in collaboration with DRIFT Scenkonst. This master project is based on the ongoing transformation of a former mining site in Ställberg, Bergslagen situated in central Sweden. The organization DRIFT is in the process of recreating to former industrial mining site as a green cultural center. Their field of artistic examination concerns existential questions connected to the site. The aim is to offer a place for both performing and experiencing contemporary performing arts in Bergslagen. Our objective is to contribute to the growth of the performing arts project and to demonstrate in concrete terms how a conversion of a mining area can be completed, while taking into account both its history and its new function.

Abstract The purpose of this essay is to find difficulties and risks in the re-engineering process when restructuring to Model-View-Controller (MVC). A thoroughly theory study has been conducted to be able to understand the important steps in the re-engineering process. The methods and concepts of this essay are re-engineering, UML, system development life cycle, design patterns and MVC. The science approach used is design science where the artifact being developed are a set of models.In the analysis phase of the process the system is analyzed. The result of the analysis is notes of difficulties found and models showing the structure of the system.

In the faster growing pace of changes and competition in the global economy, factors promoting group effectiveness are of interest. How do components of leadershipstyle, especially transformational, team climate and selfefficacy correlate? To answer this question 3 questionnaires regarding leadershipstyle (MLQ), team climate (TCI-Short) and selfefficacy (self developed) were distributed to employees of a Swedish installation company (108 participants). Moderate positive correlations were found between climate and selfefficacy and between varying elements of leadership and selfefficacy. The leadership behaviour Contingent Reward correlated moderately with all climate dimensions and strongly with selfefficay.

This reportcommunicates the processes and results of my degree work in industrial design at candidate level at Umeå Institute of Design.During my degree work I had a cooperation with Svenska Jägareförbundet (Swedish Hunters Assosiation).The aim for my project has been to explore how I could make hunting a safer hobby and undertaking. Every year people get seriously injured and in average 2 people a year dies  due to hunting accidents. My goal is to identify problems within the hunters communication and approach. Through a creative design process I will find a valid  nd realistic solution to these problems. My project will be presented as a conceptual solution  hat will be based on currently existing technology.

The essay describes the bachelor project by Marie Hanås, in collaboration with Skälsö Arkitekter. Skälsö Arkitekter are currently developing an area in the north of Gotland, Bungenäs; previously home to lime stone quarries and military bases.The brief was to design a set of outdoor furniture to complement the new development. The main effort of the project was in designing furniture that would fit the environment visually but construction issues were a major secondary concern, to ensure the easiest possible manufacturing. A reference group of coastal house owners were interviewed, and their feedback, together with an analysis of functions, trends and target groups, were the base for the ideas.Of the five concepts presented, Skälsö Arkitekter chose one to develop further. This was done through sketches, models and 3D models and led to the final result which is lightweight furniture of Gotlandic pine wood with an industrial touch.

Project management has been a very popular way of conducting information system development in the past years. Among all major information system developing companies today, almost everyone work in some form of project management. Our objective with this study has been to find out if there are any problems that begin in the early part of the project. Problems that, if they aren?t solved directly, can become bigger problems later on in the project.

Energy is today a very common topic, not only in Sweden but in the whole Europe. In EU they have given out a directive 2002/91/EG about buildings energy use and throw this they have forced their members to show how much energy their buildings use. In Sweden has the gouvernment established a law (SFS 2006:985) about energy declaration for buildings which demands that the building owner needs to show how much their buildings energy consumption are. Important to know is that this law doesn´t applies for industrial buildings.The report will show what the new law about energy declaration for buildings and appurtenant directions will mean for Riksbyggen. Also energy calculations will be done to be able to compare Riksbyggen buildings with the new law and directions.

This master thesis studies how much the cycle time, i.e. the time it takes for an industrial robot to perform a given task, can be reduced if an extra degree of freedom (DOF) is added to the robot system. The extra DOF consists of a linear track, which is supposed to be used in an optimal way. The problem has been studied using simulations in the robot simulation tool RobotStudio. To be able to run an optimization in Matlab, with the RobotStudio simulation cycle time as the object function, communication between Matlab and RobotStudio has been set up with an interface written in Visual Basic.