Reducing the CO2-pollution, resulting from the combustion of fossil coal for energyproduction, is important to affect environmental changes. One way to achieve a reductionis to use the oxy-fuel technology. The technology uses O2 and re-circulated flue gasduring the combustion which results in a flue gas mainly consisting of CO2. The flue gascould then be compressed and stored without environmental effects. A problem thatfollows from the compression is the risk of acidification in sensitive parts of the process.Acidification can occur because of reactions following from the contact of condensedwater and sulphur- and nitrogen-oxides which are also present in the flue gas.This report compiles and evaluates the basis of a scientific unit with the purpose ofexploring the possibilities of extracting impurities of SOx and NOx from the flue gases.The dimensions of the unit are based on basic conditions, defined for an existing oxy-fuelprocess at Chalmers, and on the results of computer modelling.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

During 40 years of industrial production, from the end of the 1890?s until the end of 1930?s, coal and wood distillation products were manufactured in AB Carbo?s tar factory along the River Gimån in Grötingen, in the county of Jämtland, Sweden. In accordance with the Swedish Environmental Protection Agency?s Methods for Inventories of contaminated sites, MIFO, the site in Grötingen has been identified as a potentially contaminated site. In order to determine whether toxic substances pose a threat to human health and ecological systems in the area, there was a need to investigate the presence of contaminants, their levels and potential for migration.

This report is on concrete work during the winter and is implemented on Peab?s behalf. The assignment was to describe the differences between a summer- and a winter casting. While it shows the complications that exists, it also show what aids are available, both electronic via computer and physical aids.The information that I have developed is originally from theory in books, information on the internet as well as practical experience from knowledgeable people that works in construction output. Other theories are those I have learned throughout the education to become a construction engineer, including all oral sources over the years.The results I have come up with, I hope will be able to help future construction projects in the planning phase of a winter casting.

All around the world more and more people move from rural areas to live in the cities. Because of this, the urban areas have become an important part in the debate about the effects on the environment and sustainability. In many countries word wide initiatives have been taken to build sustainable cities and eco cities, the Stockholm Royal Seaport is one example. The vision for the district is to become a world class sustainable city based on the three dimensions of sustainable development: social, economic and ecologic. The municipality of Stockholm has set requirements for the buildings? energy usage, emissions and amount of waste generated during the building process.

Erasteel Kloster AB Söderfors have been commissioned by the county administrative board in Uppsala län to make an inventory of possible contaminations in theirs industrial- and landfill areas on the basis of the Swedish Environmental Protection Agency?s; ?Method of Surveying Contaminated Sites-phase 1? (MIFO-fas 1). The inventory starts with maps and archive studies, place visits and interviews, and finally a risk classification is done. A risk classification is a compilation of four categories; pollutant toxicity, contamination level, possible spreading condition of the pollutant, sensitivity and protection value of the environment. In this paper five partial areas (Holmen- and Jörsöområdet, Järnsvampsområdet, Ingsådeponin, Östra verken and Myrområdet) have been described from a historical point of view. Only parts of four areas have been risk classified (Holmen- and Jörsöområdet, Järnsvampsområdet, Ingsådeponin and Östra verken), due to that the other areas isn?t own by Erasteel Kloster AB. Holmen- and Jörsöområdet Holmen- and Jörsöområdet have during the entire activity time been carried out as the production core in the company.

The aim of this study was to investigate a health intervention at a Swedish telecom company, with regards to behavioral, cognitive and somatic stress, experienced health, and absence due to illness. A further aim was to investigate the employees' perceptions regarding the health intervention. Questionnaires were collected from 139 employees at the customer service departments.Results indicated that the health activity bowling to some extent could predict lower behavioral stress. However, the most important predictors of stress and perceived health were lack of meaningfulness and quantitative demands. Lack of meaningfulness was also a predictor of absence due to illness.

This report is a documentation of the workflow and the result of a project carried out by twostudents from the Royal Institute of Technology in collaboration with a company. The report isstructured in a chronological order and describes the methods and systems developed in theworkflow. The report shows how the project evolved from a study phase to the various proposals onthe concept solutions.The project aims to develop a systematic way of bonding two different kind of cardboard under fiveminutes. By conducting a general study about glue and its different forms it was possible to obtain abroad knowledge, which helped to choose the right substances to later use in testing on the differentcardboard materials in question. Glues's survey resulted in a list of different substances that wererelevant to the project.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

The worldwide industrial demand of energy, often in form of fossil fuel, is continuously growing and at the same time these resources are coming to an end (Hamamre, 2013). The interest and focus in renewable sources are then more important than ever and plants are suggested to be a good alternative for production of raw material for industrial purposes (Nilsson et al., 1998). But the world is also facing an increasing world population which also increase the nutritional needs, plants therefore need to be suitable for both industrial and nutritional purposes. To achieve this, common plants need to be improved but it also need new potential crops to be developed and introduced (Carlsson et al., 2009). Modern technology like gene engineering is an important tool to achieve these challenges (Carlsson et al., 2011). This work focused on analyzes and evaluation of different transgenic lines of field pepperweed (Lepidium campestre L.).

AbstractThe urgency to find alternative fabrics to conventionally produced cotton is increasing as vast amounts of agrochemicals are used and a lot of irrigation is required. In this literature survey the potential of organic cultivation practices to produce highly qualitative hemp fibre, suitable for the textile industry, was investigated. The definition of a fibre in the textile context as well as of the qualities that are essential for a textile fibre was necessary as a base for the discussion in this thesis. The quality parameters looked at were fineness, strength, length, friction, and colour. The impact of external growth factors and plant development on these quality properties are discussed.

What psychologial processes are activated in experiencing mourning after a loss of a belovedperson? How is death described in other authors? novels and short stories compared to mine?This essay aims at analysing my two short stories The follower and The price for love fromdifferent aspects. I discuss the psychological realism and the spirituality using the method ofclose reading, interpreting and applying ideas of texts from other authors in my short stories.Death is a central phenomenon in both of my texts. Therefore I discuss death frompsychological and philosophical aspects in this essay. To get a philosophical frame of death Iturn to Jacques Derrida, Emmanuel Levinas and Martin Heidegger.

Detta examensarbete genomfördes på ABB Power Technologies AB i Ludvika. ABB vill överbrygga gapet mellan industri och informationsteknologi för att få de båda delarna att arbeta integrerat. ABB kallar detta koncept för Industrial IT (IIT). Ett krav från koncernledningen är att alla produkter ska vara certifierade enligt nivå 0, som är det första steget i IIT: s certifieringsprocess. Målet var att utföra en kravspecifikation på ett system som ska kunna leverera certifierad produktinformation enligt IIT-standard.

Background: The stress in the society seems to having become more amplified and more trying. Statistics show that the appearance of stress related industrial diseases have increased strikingly. What can be stressing at the workplace? The work conditions are not the only thing that causes stress but no matter what the causes are employers have to restore the employees to their former positions. How are companies dealing with the problems of stress in reality? Do they have formulated strategies for how to manage the problems? Purpose: The purpose with this essay is to try to see pattern in how companies manage and treat stress and stress related industrial diseases.

AbstraktWestin Mikael, Den industriella revolutionen i läroböckerna - En studie av tre läroböckers behandling av den industriella revolutionen, (The Industrial Revolution in the teaching books - A study of the industrial revolution in three teaching books). Individ och samhälle, Lärarutbildningen 60 poäng, Malmö Högskola, 2006.SyfteSyftet med följande arbete är att undersöka hur läroboken hanterar den industriella revolutionen samt även hur lärarna förhåller sig till läroboken. MetodArbetet utgår från Geoffrey Partingtons teori om historisk signifikans och testar den tillsammans med en klassisk bakgrund-händelse-förlopp modell på läroböckernas redogörelse för den industriella revolutionen. En kvantitativ enkätstudier bland gymnasielärare i historia A gjordes för att fånga deras bild av industriella revolutionen och läroböckernas behandling av den. ResultatDe tre undersökta böckerna uppvisar en splittrad behandling av den industriella revolutionen.