The acquisition process as an object for research and empirical studies have increased in importance during the past decade. The purpose of this thesis is to investigate this process further. This was done by reviewing previous research covering the area of mergers and acquisitions. Seven key factors that should be considered in an acquisition process emerged; acquisition project management, planning, communication between the acquirer and the potential target, goal alignment within management, company-cultures, a trade-off between a certain speed in integrating the companies and consideration of the employees, and finally the follow-up. These factors have been shown to increase the likelihood of value creation in acquisitions.

This work is a product development of a product which facilitates enduro drivers swallowing fluid while driving. My own experience of the problem and a custom survey gave me some frames and requirements of how such a product would look. To obtain the different concepts the method of brainstorming was used where I outlined the various proposals. The basic concept was that some kind of pump would build pressure in the liquid and when the user opens the nozzle the liquid will come out without the need to use the mouth to suck. The screening phase consisted of two steps.

Event is something that an increasing number of Swedish cities are investing in since it contributes to higher attractiveness of cities and generate economic revenues. New arenas are built around Sweden to meet the increasing demands to host such events. Event projects are carried out in Sweden and it is important that the planning phase is carried out thoroughly to get a successful project. This thesis aims to look more closely at selected organizations and how they plan their projects and whether it is possible to follow project plans in the event projects. Karlstad has many events that recur annually, including the Swedish Rally.

Forskningsfrågor:Går det att urskilja CSR-engagemang inom DIS och på vilket sätt arbetar DIS med CSR? Hur påverkas DIS arbete av deras intressenters involvering och engagemang beträffande CSR frågor, vilka utmaningar och möjligheter kan identifieras gällande detta?Syfte:Syftet med studien är att kartlägga och utvärdera hur DIS arbetar med CSR.Metod:Denna studie är en fallstudie med kvalitativ ansats som inriktar sig på en viss organisation, i detta fall DIS. För denna studie utfördes sju semi-strukturerade intervjuer i avseendet att samla in data som mätte upp till och passade in i studiens övergripande syfte.Slutsats:Studiens resultat påvisar att DIS inte innehar någon CSR-strategi men att det är möjligt att urskilja ett utspritt engagemang inom företaget. I nuläget går det att benämna CSR-engagemanget ur ett inaktivt/reaktivt tillvägagångssätt. Intressenter är av väsentlig vikt för DIS i nuläget och att vidare involvera och skapa relationer med ur ett CSR-perspektiv..

I denna uppsats undersöks hur psykologens yrkesroll formas och utformas på vårdcentral. Det empiriska materialet utgörs av semistrukturerade intervjuer med fem psykologer på vårdcentral, deras verksamhetschefer samt en yrkesutvecklingskoordinator för psykologer inom primärvården. Med utgångspunkt i grounded theory har resultatet analyserats i termer av primärvårdspsykologi, professionell identitet och professionssociologi. Resultatet lyfter fram psykologernas bild av sin yrkesroll, deras upplevelse av relationer till andra i organisationen och till gränsfrågor. Slutsatsen är att psykologens yrkesroll på vårdcentralen befinner sig i jurisdiktionens gränsområde och innebär ett aktivt identitetsarbete, en komplex och dynamisk process i spänningsfältet mellan professionella identitetsideal och organisatorisk reglering..

The main aim of the study was to examine the importance of organizational climate for affective job-related wellbeing. A further aim was to investigate potential differences in employee level in the experience of organizational climate and wellbeing. Another purpose was to see if there was agreement in the view of the organizational climate among the employees. Questionnaires were collected from 44 employees at a chain store. Results showed that Integration, Involvement, Supervisory Support, Training, Welfare, Innovation and Flexibility, Goal Clarity, Efficiency, Effort, Performance Feedback, Pressure to Produce and Quality had a great influence on Enthusiasm but only Pressure to Produce and Welfare correlated with Anxiety.

The use of vision applications are growing and the demand for integration and connectivity with other industrial automation control devices is increasing. Some businesses that are using vision technology follow US Food and Drugs Administration (FDA) regulation concerning audit trail. This thesis investigates the possibility to use vision technology for counting objects, achieving connectivity and to follow FDAs audit trail regulation. A market survey has been used to select suitable hardware and software to be used in the design of an application that is able to count objects and that uses standard industrial network connection i.e. OPC data access and Microsoft?s .NET components over Ethernet.

Reducing the CO2-pollution, resulting from the combustion of fossil coal for energyproduction, is important to affect environmental changes. One way to achieve a reductionis to use the oxy-fuel technology. The technology uses O2 and re-circulated flue gasduring the combustion which results in a flue gas mainly consisting of CO2. The flue gascould then be compressed and stored without environmental effects. A problem thatfollows from the compression is the risk of acidification in sensitive parts of the process.Acidification can occur because of reactions following from the contact of condensedwater and sulphur- and nitrogen-oxides which are also present in the flue gas.This report compiles and evaluates the basis of a scientific unit with the purpose ofexploring the possibilities of extracting impurities of SOx and NOx from the flue gases.The dimensions of the unit are based on basic conditions, defined for an existing oxy-fuelprocess at Chalmers, and on the results of computer modelling.

Machine-to-machine (M2M) communication is a phase in the digital revolution connecting computing devices with each other bringing along new business opportunities for companies. Although being a fast growing field it has not been researched to any greater extent, particularly not within the academical literature. Consequently, information on how M2M can affect organisations seems strongly needed. This thesis uses three perspectives, derived from already recognised business benefits of M2M, as an aid to select proper theoretical tools to investigate the phenomenon. The purpose of this thesis is to gain knowledge of how an M2M adoption affects a firm?s organisation, customer offerings and customer relations.

This paper examines and summarizes rules, guidelines and methods for how an e-commerce site should be designed, which elements it should contain and where these should be placed. Our approach consists of two phases. First we comprise relevant research within the target area. This is then divided into logical themes and is used as a foundation for an interview guide, which will be used in the second phase. After this, in the second phase, we conduct qualitative interviews with designers that are actively working with design of e--?commerce  sites.

Corporations meet complex challenges as they operate on a global market. Global multidimensional problems are referred to wicked problems and which cannot be solved only managed. In this case, of certified palm oil, palm oil production can be seen as a wicked problem due to deforestation of rainforest, land grabbing and social conflicts. There are also conflicts regarding the value and interest of palm oil. This thesis investigates the Swedish transformation for certified palm oil and how actors in the Swedish food market address this transformation to have certified palm oil in their production. The aim of this thesis is to explain enabling factors to address the governance gap of ethical sourcing in the food industry.

What psychologial processes are activated in experiencing mourning after a loss of a belovedperson? How is death described in other authors? novels and short stories compared to mine?This essay aims at analysing my two short stories The follower and The price for love fromdifferent aspects. I discuss the psychological realism and the spirituality using the method ofclose reading, interpreting and applying ideas of texts from other authors in my short stories.Death is a central phenomenon in both of my texts. Therefore I discuss death frompsychological and philosophical aspects in this essay. To get a philosophical frame of death Iturn to Jacques Derrida, Emmanuel Levinas and Martin Heidegger.

This thesis studies path generation for industrial robots of six degrees of freedom. A path is defined by connection of simple geometrical objects like arcs and straight lines. About each point at which the objects connect, a region, henceforth called a zone, is defined in which deviation from the defined path is permitted. The zone allows the robot to follow the path at a constant speed, but the acceleration needed may vary. Some means of calculating the zone path as to make the acceleration continuous will be presented.

This thesis is divided in to two different parts. The first part includes examination of the measurementsystem of an industrial robot using a resolver sensor. The main focus is on methods for suppressing noise in the angularvelocity signal without increasing timedelay. Five different methods are investigated. Three of these are based on oversampling: burstsamplingmethod, meanvaluemethod and correlationmethod.

Even though Sweden is a small country which has a low rate of inhabitants is it one of the worlds leading nations of exporting products from the forest industries. The Importance of a sustainable use of the Swedish forests has been known for many years. In 1903 the first law of forestry were establish. Today the National Board of Forestry carry out inventories of regeneration result. The result of the latest inventory showed that especially the non-industrial private forest owners did not full fill the regeneration work after a clear cut.