This master?s thesis report is a summary of the analysis performed together with ITAB Shop Concept located in Jönköping, Sweden. As a last element of the Master?s program at the School of Engineering, this 20 point level D thesis project has been the final work to bring my education to an end.ITAB Shop Concept expressed an aspiration that the Shop Counter Program B10/B11 should undergo an analysis to point out and possibly lead to improvement.Through interviews and data collection proposals for possible improvements has been drawn up and the analysis points out current deficiencies. By following the idea generation, proposals to solutions for every individual problem is presented.

The purpose of this study is from a case study develop a model that aims to cost effectively improve productivity in a manufacturing production process. The study highlights the importance of having knowledge about customer needs and using a holistic process perspective when improving productivity to identify the relations between the process stations and by this find problems that cause waste and losses in productivity. Tools and methods used to make production more efficient such as single minute exchange of die, spaghetti diagram, 5s and master production schedule is presented an applied in the model to see how these effect costs, productivity etc.Maintenance effects on quality and productivity in a manufacturing company will as well be covered in this thesis. The results and conclusions finally reveals how the process improvement tools, maintenance and production planning for example effects each other and why it is important to establish an attitude in the company where continuous process improvement should be emphasized..

The purpose of this report is to present some of the market's façade panels and to do a survey of Masonite façade panels and compare. Therefore I have looked closer on potential competitors and studied their assembly method and properties. I will also propose suggestions on installing Masonite panels and improvements to the current carrying system. The carrying system for façade panels in general. Various key people in various areas of the construction industry have been interviewed. People with a wide knowledge of theory and with real work experience have been my main focuses too implement this survey.

By surveying conceptions of SLU Alnarp?s resources and competence among its students and personnel, this thesis has the purpose of inventing identity, positioning and image of SLU Alnarp. The underlying idea is that the analysis of the opinions of the students and the personnel will provide the SLU management with new ideas and general advice for an innovative strategy for success. Four quantitative interviews with selected representatives from different staff groups were performed. In order to obtain a differentiated view of the employee thoughts and opinions on the university, five persons were selected to be interviewed ? all with different types of responsibilities.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

The aim of this Master?s thesis is to examine the function of the budget as a means of control within an organisation in the public sector. To accomplish this, a case study has been conducted on a certain business unit within Luftfartsverket responsible for providing Air Traffic Control services. The thesis is built on a framework of contemporary theories of budgeting and includes a brief discussion of the weaknesses usually associated with the traditional budget. The conclusion of the study is that the use of budget as a means of financial control within Luftfartsverket is not efficient enough at the moment.

This study will chart the changeover work, with a standpoint in the SMED-theory, at the company Peter Ernst AB in Värnamo. They are suppliers in plastic moulding industry and delivers to amongst other Saab in Trollhättan and Scania. The company are in a very competitive market, and they have to make manufacturing more efficient and rationalise their costs to be able to compete. A big problem, which the company has identified, is their long changeovers. It brings higher costs, a more stressful work climate and holds back the company from becoming more efficient.Field studies will be conducted on the changeover, which will be observed and filmed.

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

Background: A common view about people with diagnosed psychosis is that they are socially withdrawn and that they neither cope nor want to engage in social relationships. Newly published specialist books on this subject also support this view.Aims: To unveil further dimensions of the phenomena by explorative analyzing consumers? own depictions about their ?social relationships".Method: The material is taken from a larger study that followed consumers regularly during a lapse of 3 years. Within this material 15 interviews from three respondents were chosen, a selection which gives maximal spreading concerning age, sex and background. The interviews where analyzed by methods based on Grounded Theory.Results: Three main dimensions were identified: supportive relationships, difficulties and social withdrawal.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

The purpose of thesis was to investigate and compare how two companies within pharmaceutical industry and nuclear power industry are currently working with quality development regarding continuous improvement and Lessons Learned in business processes. In addition, a simple comparison was made with the automotiveindustry.McNeil AB are improving their processes continuously and are according to the findings of this report performing well in their pursuit of world-class pharmaceutical production. They have a well functioning process regarding improvements proposed in weekly improvement meetings engaging all employees. However, during interviews it was made clear that the functionality of the process which administer improvement proposals generated in addition to, or beside the weekly improvement meetings, were inadequate. McNeil AB is proposed to administer this through an IT solution instead of by paper and e-mail, that simplifies the process of adding, implementing and follow up an improvement proposal.The nuclear power plant Ringhals AB recently made major improvements in their business processes as well as the plant itself.

For a long time Lean has been a well-known concept among manufacturers. Theinterest of understanding Lean and the ability to implement it is common amongcompanies. The concept of Lean, used in the right way, can help companies to reducetheir lead times, their complexity and increase the efficiency of the working processes(Hyer och Wemmerlöv, 2002). Unfortunately the work towards increased efficiencyhas primarily been focused on manufacturing and plant work, resulting in that Leanhas been adjusted to these areas. The conclusion of this is that companies don´tprioritize to improve processes such as administrative ones.

VIDA Vislanda har ett behov av att veta hur effektiv produktionen är på deras nya hyvleri. Därför är arbetets syfte att undersöka stopptidslängder samt bakomliggande orsaker till stoppen på företaget. Det ingår även i arbetet att lämna förslag på åtgärder som kan leda till förbättringar i verksamhetsgrad samt reduktion av stopptid.VIDA Vislanda vill veta vilken verkningsgrad, verklig löpmeter ut och verkligt stycketal ut för varje enskild dimension och längd. Resultatet presenteras efter detta önskemål men den totala verkningsgraden för hela mätperioden har också beräknats, till 52 %. Om VIDA åtgärdar de största återkommande stopporsakrna enligt våra förbättringsförslag kommer stopporsakerna att minska och således verkningsgraden att öka..

AbstractResource efficient manufacturing is a term that has been increasingly applied within manufacturing, where one of the key points is to reduce waste of such forms that do not add value for the end customer. By the Lean principles, there are seven plus one types of waste, in which the definition of the eighth point varies among sources. In this study, the eighth type of waste has been interpreted as the untapped creativity and competence among employees that has not been put to use. From this, our question was incubated; How can you make the most of the employees? untapped creativity and potential within manufacturing? The case study will be developed with empirical data obtained from Dometic Group by conducting interviews.From the gathered literature, it was concluded that the communication between employees contributed to an increased understanding of one another as well as it allowed for improvement in work.