This project examined the possibility to create an electronical aid with the purpose of increasing environmental awareness and to design the aid in a fashion that inspires other to develop similar applications. The impact of car traffic was examined, and the base of the aid was built up in modular form to simplify the hardware aspect. For the active, data processing part of the aid the Arduino platform was chosen because of its simplicity and big possibilities of help in different internet fora, for those who choose to create similar applications in the future. The main part of the project var the use of real-time information from the car?s on board diagnostics.

As technology have continued to develop over the latest decades and become more advanced the pressure on the general citizens understanding of technology becomes a essential part to live in our society today. The transition have affected our society in great ways and have made a great impact on different groups, one of them being the elderly population in our society. The purpose of this study is to examine how the fast technological development in the latest decades have affected the elderly in our society. This from their perspective by gathering empirical data through semi-structured interviews with elderly people involved in the Agnes-project, a research project focused on improving the general quality of life for older people and increase their knowledge about technology. The study has shown that after the older peoples time involved in the Agnes-project their quality of life had improved in different areas. Areas such as increased cognitive activity, increased interest in new technology and an improvement in their communication with friends and family.

More than half of the implemented IT-projects go over budget, deadline or simply fail. The processes in an IT-project requires technical competence to be present among the project participants to ensure the achievement of business goals and to make organisations competitive. The success of an IT-project largely depends on the project manager which makes it interesting to further investigate what impact the project manager?s technical competence has on the project. Previous research shows differing opinions whether technical competence is considered important for the project manager to be successful or not.

The purpose of this study was to examine whether there were any differences in how first-line managers within   municipal care   rated their management leadership qualities, and structural empowerment before and after the course in "leadership, learning and improvement". The study had a quasi-experimental design and 64 managers participated. There was a significant improvement in the LaMI factor ?Achievement orientation?, after participation in the course "leadership, learning and improvement". In other factors, there was no significant difference before and after training.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

As technology have continued to develop over the latest decades and become more advanced the pressure on the general citizens understanding of technology becomes a essential part to live in our society today. The transition have affected our society in great ways and have made a great impact on different groups, one of them being the elderly population in our society. The purpose of this study is to examine how the fast technological development in the latest decades have affected the elderly in our society. This from their perspective by gathering empirical data through semi-structured interviews with elderly people involved in the Agnes-project, a research project focused on improving the general quality of life for older people and increase their knowledge about technology. The study has shown that after the older peoples time involved in the Agnes-project their quality of life had improved in different areas. Areas such as increased cognitive activity, increased interest in new technology and an improvement in their communication with friends and family.

This master thesis was performed at Scania Research & Development. The given mission was to see where the department Systems Development should focus to improve their development work. Thus the purpose was to map the product development processes in which the department works today and within them identify improvements. To fulfil the purpose a theoretical study of relevant terms, such as improvement work, product development and processes, initially was formed. The mapping method used is called "walk trough" and meant to let the people working in the processes be guides in their own process.

In process oriented organizations, it is important to have well-functioning work processes tosupport the work being performed. In order to accomplish this, the organization has to makecertain decisions regarding the design and usage of the processes. This master thesis is based ona case study of a work process that is being used for the industrialization of products at Ericssonin Katrineholm. The aim of the study is twofold. One aim is to improve the studied process byidentifying improvement opportunities and carrying out the required adjustments.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

This project concentrates on musicians who work in a professional music studio.The task of this project was to design a new headphone system called Foldback system.The advantage of this system is that all involved in a music project could influence their ownlistening during the project. With a couple of adjustments should each and everyone get theirown individual listening from their headphone station.This report shows different methods, theories and results that came along in development ofFoldback system. The project has resulted in a finished product that will be in use atStudiomega..

AbstractThe overall purpose of this thesis was to investigate to what extent new research findings, in neuroscience and learning, may be useful in a school improvement context. In a qualitative interview study combined with questionnaire, we have investigated the approach to school improvement that exists in a municipality. Informants have been head teachers in preschool and primary school, special education teachers in a student health team and a development manager. The outcome of the study showed that all of the study participants, all of which have a formal mandated to work for school improvement occurs. It also shows that informants, according to their professional position, express different goals when relating to school improvement.

An increase interest of new methods and tools has begun to grow in the real estate business, this new trend causes an increase in new programs that aim to simplify processes of energy-efficiency and environmental issues.After consulting with Björn Alsmark from Bjerking AB, an architect and engineering company, we made a decision that the Degree Project is going to examine the program IES (Integrated Environmental Solutions) with some integrations from Revit Architecture application.To be able to examine IES, we got access to a completed project from Bjerking. The project is a nursery school in Uppsala. An application has been handed in from Bjerking to make this project to a Green Building-certificated project. According to Bjerking own calculations (with the energy-calculation program Enorm), the consumption of energy of the nursery school is 48 percent lesser than required by BBR.An evaluation of IES and Enorm has been made with an aim to compare these two programs and find out if IES is an appropriate program to replace Enorm. Does Enorm or IES come up to BBR´s recommendations?The Degree Project cover 15 ECT, that required several adjusting and delimitations, and the study sketch ended with a literature study.After finishing the study sketch the modeling of the nursery school began.

This report is a study made at Pallco AB. Pallco is a subcontractor that is specialized on steel and aluminium components.The aim of the report is to show an improvement proposal that leads to a reduction of the storage and improve the flow through the production of one item that is a part of a product that Pallco manufactures.With the increasing competition from other countries who can manufacture with lower costs must Swedish companies try to make theirs manufacturing as efficient as possible and remove all waste. By using the tools of Lean Production it is possible to reduce the costs and increase the efficiency.The method we used is value stream mapping. A map of the present condition has been made and then different improvement proposal were discussed. A map of a future condition has also been designed..

This thesis describes the universalization, improvement and further development of acompact crane support frame for flatbed trucks. The work has been conducted at Eloch Fordonsteknik AB (henceforth EFAB) in Uppsala.The aim of the work has been to shorten the assembly time of the product. By doingso, the product can be kept on shelf, which in turn results in shorter lead time. Thishas been done by universalizing the support frame to be compatible with most of thechassis EFAB works with. Additionally, the entire construction has been made lighter,which will make it a more attractive choice for customers.A pre-study was conducted and information was gathered internally, as well asexternally, in order to ascertain that no limitation or possibility was overlookedduring the course of the project.One such limitation has been the geometry of the truck bed that the support frameshall be compatible with.

There are several Project Management Softwares onthe market today. These tools are powerful andextensive to the degree they become too timeconsumingand complex and therefore often defeatits original purpose. This is the case especiallywhen the project manager is inexperienced and/orthe scope of the project is moderate.The purpose of this thesis arose from this context,there seems to be a gap between a home-made MSExcel spread sheet and the advanced softwaresavailable. The thesis and the product has beendeveloped in alliance with Faveo ProjectManagement with the shared goal to create a toolwhich is easy to use but still covers the essentialareas of project management theory. The tool willbe used internally by Faveo-employees as well asexternally together with Faveo?s clients in aneducational purpose.