The purpose of this study was to obtain an understanding of how the employees at LFV Group Swedish Airports and Air Navigation Services (Luftfartsverket) manage to combine work and family, and put this in relation to the concepts of employer of choice and socially sustainable development. Qualitative interviews were carried out with 23 randomly selected participants at the three largest places of work within the organisation. The results showed that the combination of work and family mostly could be managed but that factors like high workload and feelings of stress affected the participants in a negative way. The main measures facilitating the combination of work and family were shorter working hours and support with domestic chores. LFV can partly be considered an employer of choice when it comes to family friendly benefits but changes could be made for further improvement.

Because of an increasing demand from customers and changing external environment, there is a need for continuous improvements, for both manufacturing and service organizations, to meet these demands. Manufacturing organizations have been working systematically with quality improvements for a long time, but it has not been as common for service organizations. Because of that the methods to use for implementation of the systematic improvements have not been designed to fit service organizations, and not either for public organizations. The purpose of this thesis is to explain if and why the Swedish Road Administration?s organizational culture and handling of ideas and deviation support an implementation of continuous improvement management.

Abstrakt -  As energy prices rise, energy-saving in buildings is becoming increasingly important. By applying different construction and installation technologies, to new buildings the energy consumption can be reduced effectively, compared to similar existing buildings. These technical measures are often an investment in the long term and will reduce energy costs significantly. The purpose of this report is to show how to reduce energy consumption in a small house. It is presented in this report that both building's technical saving arrangements (the sealing of a building) and an installation technical arrangement (changing from the F-system to the FTX-system) would reduce energy consumption in newly built detached houses, if compared with a similar existing house but without these technical measures. The report presents also detailed calculations showing how much energy an existing 2-storey house, built in the year 2007 in Eskilstuna, consumes and how much energy would be saved if these corrective measures were applied to a new building. It is also reported how much money would be saved each year over a 10 year period if the measures were applied. The results show that both solutions are a good investment in the reduction of energy consumption and hence the cost involved. Keywords: energy, heat energy, infiltration, FTX-system, free temperature effectively. .

Rabbits, Oryctolagos cuniculus, rapidly increases as pets. During the right circumstances, rabbits are friendly, social and playful. A rabbit who shows an abnormal behavior should always be examined by a veterinary, though there is almost always a medical problem. This essay is a result of a literature studie with the aim to find the prophylactic measures that may give pet rabbits a more healthy life. Rabbits have got a lot of common health problems, including dental, skin and gastrointestinal problems.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

Abstract Title: A messy story ? a case study of Secorocs process flow of DTH-pipes Presentation date: 2010-06-02 Course: Bachelor thesis in businessAuthor: Kristoffer ForsmanAdvisor: Kjell GustafssonKeywords: Management control, process control, lean production, process flow analysisPurpose: The purpose of this bachelor thesis is to develop an overview of the process flow for a specific product, and with the help of this mapping based on a lean production philosophy show possible improvement proposals and how these can lead to a more efficient process flow.Methodology: I have used a case study of Secorocs DTH-pipes and my primary data are gathered through interviews and observations. I have used theoretical framework to establish a process flow analysis. This is to obtain data on process activities and whether they are creating value or not. This leads to a current mapping of the situation in Secoroc on DTH-pipes and then analyzed and suggestions for improvement are developed.Conclusions: That by using the above mentioned mapping of process flow of DTH-pipes, problem areas could be illustrated.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

The effects of the climate changes are expected to generate several substantial direct and indirect consequences on both ecosystems and societies. It is the extent of the negative consequences that determents the vulnerability of the things or the ones exposed. The knowledge of the effects and consequences by a changing climate provides an opportunity to take measures to reduce the vulnerability.Our society?s vulnerability depends on how we choose to act out of the existing knowledge and what measures we choose to take. Karlstad municipality has good knowledge and perception of the increased flood risks the climate changes will generate and the probable consequences that most likely will follow. How the municipality decides to manage the flooding issue is not just affected by the will to mitigate the vulnerability but also by the vision to increase the number of citizens.

This master thesis was performed at Scania Research & Development. The given mission was to see where the department Systems Development should focus to improve their development work. Thus the purpose was to map the product development processes in which the department works today and within them identify improvements. To fulfil the purpose a theoretical study of relevant terms, such as improvement work, product development and processes, initially was formed. The mapping method used is called "walk trough" and meant to let the people working in the processes be guides in their own process.

The improvement programme Six Sigma has often been surrounded by an air of success since it was introduced in the 1980s. Yet there are cases in which introduction of the Six Sigma improvement programme show far from successful results, even complete implementation failures with no traces of the Six Sigma methodology or any improvements after completion of the introduction. These failures can cause severe damage to organizations through direct monetary loss caused by a negative result of the investment. Indirectly the failure can cause confusion in the organization and loss of employee motivation. The conclusions have been derived based on a qualitative case study at a Swedish telecommunications company.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

This Master thesis is performed at the request of the forest company Mellanskog and the local municipality of Borlänge in Sweden and aims to establish recreational adjusted forest management plan for the areas of Mellsta and Skräddarbacken in Borlänge. In all types of urban forestry it is very important that the management plan are accepted by the general public. To make sure that also these plans of future measures, pass in the public, interview studies have been performed in which the public wishes and interests have been examined and applied in the management plan. To make sure that future measures in the forest may be accepted by the public when the forest harvester enters the woods, it is very important that a well functional work of information has been made. The people living close by the forest shall have been informed a couple of weeks before the time of measures and it must also be good information available that explains what is to be done and why.

This master thesis was performed as a mission from Holmen Skog with the purpose to investigate to which extent their own machine teams and engaged contractors were exposed to theft and vandalism, and most common preventive measures used. With the help of collected data the study should lead to proposals of preventive measures that can help the machine teams in their struggle to minimise theft and vandalism. Theft and vandalism are a big problem for Swedish forest contractors. In a scarce economic situation thefts and vandalism rapidly decrease the profit for the contractors. However, the last years have resulted in a positive awareness of thefts, and more and better preventive measures have been developed. With the initiative of this master thesis, Holmen Skog show that they are aware of the situation and that they wish to take control of the problem. A total amount of 108 questionnaires was sent out to Holmen?s own machine teams and engaged contractors.

Severe floods caused by heavy autumn rains in year 2000 raised the question whether measures to reduce the damage from high water levels, in the area surrounding lake Glafsfjorden and along the river Byälven down to lake Vänern, are possible. One option is to reduce flow resistance along the river and thereby lower the maximum water level a given inflow would cause. Good knowledge of hydraulic and hydrological conditions is necessary in order to estimate the effect of such flow-reducing measures. In order to quantify such effect a 1-dimensional hydraulic flow model has been set up for the river Byälven using the software package MIKE 11. The model is more detailed, especially concerning topography and bathymetry, than earlier models used for studies of the river.

This thesis is based on an investigation to find out in what way 40 Swedish public librarieskeep and preserve their library materials. The investigation is based on inquiries sent outto the libraries. It deals with the keeping of books with regard to external factors which havedestructive effects on library materials as well as the safety at the library buildings. It is, aswell, about the preserving work being done at the libraries.Comparisons are made with literature and accounts about preserving measures and recommendationsregarding appropriate environment in premises and depositories. The resultsshow great differences between the libraries as to the library environment, i.e.