The purpose of this assignment at SSAB Tunnplåt in Borlänge was mainly to investigate and describe the circumstances for the spare parts stored in storage facilities within the area of operation. Even new facilities which could serve as storage rooms and their opportunities for storing spare parts were an important part of the investigation. This because of the need for improved storing of spare parts. Furthermore, market offers where reviewed for storage of spare parts in more tailored designs. The work will culminate in proposals for improvement which is of importance for the development surrounding the storage and handling of spare parts.

This thesis investigates lacks in today?s use of the ERP-system Mapaz Affärssystem inthe production planning at Solna Pressgjuteri, and possible improvements. Today thedates calculated by the program to plan the orders are inaccurate and the ordersequence is not optimal, and therefore continuous manual corrections are needed.The approach was to study the program Mapaz to understand how it works, andidentify available parameters for input and output in the different tools offered in theprogram. By studying old lists of planned orders and relevant parameters in Mapaz forindividual orders, production groups, products and operations, the connectionbetween input and output parameters could be understood.Participating in planning meetings and discussions with the company behind theERP-system identified the current usage, desideratum and possibilities with theavailable tools. These were then matched to describe the reasons to the insufficientplanning and form possible actions for improvement.The work has showed poor understanding for the ERP-system and its functions, assome tools intended to assist the planning were not used, and some even usedincorrectly.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

Denna kvalitativa studies syfte är att belysa coachingfenomenet för att på så sätt få en djupare förståelse för vad det är som skapar utveckling för individen och hur detta upplevs av den som blir coachad. Genom följande frågeställningar uppnår vi vårt syfte: Vad gör en coach när den coachar? Samt vilka faktorer identifierar coachen och den som blir coachad som betydelsefulla för en lyckad process?Den vetenskapsteoretiska ansats som studien utgår från är Hermeneutiken och metoden är kvalitativ, med tematiskt öppna intervjuer för insamlingen av det empiriska materialet. Intervjuerna är genomförda vid olika tillfällen med sex personer vilka arbetar som coach inom arbetslivet i södra Sverige samt med fyra personer som har blivit coachade. Coacherna och de coachade har inget samband med varandra.

The aim of this study was to compare perceived disability in daily activities, anxiety and depression for patients with chronic pain (>3 month), before and after rehabilitation. Another aim was to examine if there were any correlations between disability in daily activities and the extent of anxiety and depression before and after rehabilitation.For the measurements, Disability Rating Index (DRI) that measures disability in daily activities, and Hospital Anxiety and Depression Scale (HADS) ) which measures the extent of anxiety and depression were used. The study was carried out with 50 patients who had suffered from chronic pain and with the objective to return to work after rehabilitation. Of these, 90 % were female. The measurements were carried out at three measure points; before rehabilitation, seven weeks after rehabilitation and one year after rehabilitation.The main result did not show any statistically significant improvement in ability to perform daily activities.The only significant difference that emerged was an improvement in anxiety seven weeks after rehabilitation compared with before.

Abstract Title: Coaching Leadership - A win-win situation? Level: Final assignment for Master Degree in Business Administration Author: Helena Gustafsson Supervisor: Pär Vilhelmson Date: 2012 ? mars Aim: The purpose of this study is to examine how companies use the coaching leadership and how the employees perceive to have a manager who uses this way to lead. Method: The study was conducted as a qualitative study in which interviews was an important feature. The information I gathered is the basis for analysis and final discussion. The material has been collected through personal interviews with two managers and then I send questions to the employees by e-mail that they responded. This is to get such an interesting empirical data as possible.

In recent years coaching has become an increasingly popular phenomenon outside of the sports world. More and more people have found coaching to be a helpful tool for achieving greater performance and fulfillment in their lives. This thesis is a comparative literature study of three books about coaching where the authors use different theoretical bases to explain and teach coaching. The aim of the thesis is to explain how coaching as a phenomenon is described and compare these descriptions as well as to look at the ideals and norms that are produced and reproduced in the use of coaching. The study compares the three books from six different themes and shows that, in the use of coaching, the ideal of a rational and action oriented individual is constructed and the aim for this individual is some form of success.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

Today's fierce competition means that companies constantly must develop their business and internal processes. Focus on processes and continuous improvement is something that characterizes Lean Production which ICA logistics are applying with their concept Leading Logistics. Standardized routines for handling damaged gods were insufficient at the ICA distribution center in Kungälv. Handling and registration of damaged gods were not performed uniformly, resulting in problems with controlling and monitoring the process.The purpose of this thesis was to analyze and make recommendations how the process of internal handling of damaged gods could be improved. Therefore a comprehensive understanding was needed of the entire material flow through the warehouse and important quality aspects such as product safety and delivery reliability.The methods used are literature reviews, interviews and observations to produce a comprehensive process mapping of the current situation at the distribution center.

This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik.The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains improvement suggestions about how the company can use the current computer system more efficient.The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation.The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if improvement can be done and how the flow of information is supposed to happen.In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section.Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented.The work consisted in making the groundwork for a template.

The purpose of this thesis is to make a comparative literary study of ten laboratory experiments with different kind of sources for query expansion terms. The experiments are grouped according to categories of term sources, which are: search results, collection dependent knowledge structures, collection independent knowledge structures and one that combines the two last mentioned sources into one. To enable a comparison all other variables were held as constant as possible. There is the improvement measured in mean average precision, which is used to measure the various sources potential. The result from the study shows a strong connection between the kind of source for the expansion term and improvement of the result.

The purpose of this thesis is to describe how principals apprehend the school library. In order to respond to this I formulated three questions: How was the improvement of the school libraries carried out in one municipality? Is the school library experienced as a part of the schools organization? How is the use of the school´s library experienced? To be able to answer these questions, for the purpose of this thesis, I have studied relevant literature on school libraries, the school organization and literature on qualitative methods. I have made six qualitative interviews. The objects of the interviews were three librarians and three principals.

If Sweden want to be able to compete internationally with its production capacity,it is important to work actively with production development and production ofresource-and time-efficient. This report is a bachelor thesis of 15 hp conducted atthe University of Halmstad. Using the principles of continuous improvement andLean Production, the author developed a concept for HAGS Aneby AB to changeto the customer order driven assembly of spring toys.First of all, the theories of Lean Production, logistics and ergonomics are used tobuild and present a theoretical framework for further examination. Then, toachieve the target, the current assembly process is analyzed to develop some firstconceptual ideas for improvement. In order to develop the best advice, theconcepts are evaluated against the company?s requirementsThe developed action plan gives recommendations on how the company shouldrestructure their assembly process and the organization of the related departmentin order to produce spring toys in a more time efficient and lean way.

Objectives: The purpose of the study was to examine if a pre- and post-operative difference could be seen in self-reported pain disability and self-efficacy among patients undergoing surgery as treatment for spinal disc herniation in order to improve process of rehabilitation.Method: A quantitative and descriptive design was used. 10 patients awaiting surgical treatment for spinal disc herniation were included at Akademiska sjukhuset (The Academic Hospital) in Uppsala. Participation was voluntary and the selection was made by convenience. Data was collected using The Pain Disability Index and Self-Efficacy Scale by which the patient would estimate how hindered they felt because of their pain in everyday activities and their self-efficacy to perform everyday activities. This was done the day before surgery and two weeks after surgery.