Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

This paper is a study and comparison between the two Wireless LAN (WLAN) standards HiperLAN/2 and IEEE 802.11a. WLANs are used instead or together with ordinary LANs to increase mobility in for example an office. HiperLAN/2 is an European standard developed by ETSI and the IEEEs standard is American. A WLAN-card consists roughly of a Medium Access Control (MAC), Physichal layer (PHY) and an antenna. The antenna is the same for the different standards.

Recent developments suggest that private and public companies are moving towards a more service-oriented business. Service orientation means that hardware is often sold in packages with service agreements, which makes the investment more difficult to assess. The challenges that arise will be to assess the value of the overall package, the information needed to make informed decisions and the operational requirements in combination of hardware, software, support agreements, training and more. The paper therefore aims to examine how decision makers can evaluate the benefits of these investments and obtain a stronger base to make better decisions. There is within the area of radiology in the region of Västra Götaland a pronounced need for a better flow of information regarding medical equipment and related service agreements.

The demand for shorter lead-times and increased delivery reliability puts pressure on companies to provide more efficient logistic services. One strategy to deal with this demand is by outsourcing logistics to a third part. The development of logistics information systems enables increased control over business supply chains. This is why Green Cargo aims to create a Logistics Control Tower (LCT) solution to provide it?s customers with better information with higher availability.

Most swedish newspapers have a homepage where their news are presented. Existing guidelines describing how to write for the web often recommends you to keep it short and stay objective. But how about longer pieces of content presented in the print version? What will become of reports, interviews and essays as we?ve come to know them as the printed newspaper goes digital?Interviews with representatives of five swedish newspapers shows that the extent to wich content is being published on the web is connected to the overall purpose of the web presence. The fact that many newspapers does not publish longer pieces of text on the web rather seems to be an economic issue, than a matter of good readability.Past studies shows that longer pieces of text may well work on the web, if the reader?s interest is big enough.

The predominant forestry harvesting method is based on the harvester-forwarder method, theharvester folds, branches and cuts trees, and sorts the logs into piles, while a forwarder transportsthe logs to a landing area.This master thesis work is about realization of a dynamic forwarder simulation model, and itspurpose is to provide an integrated forwarder simulation model in MATLAB/SimMechanicswhere the forwarder is based on a concept using pendulum arms to connect wheels and chassis.Active suspension control is developed and implemented into the simulation model, and finallycompared in simulation with passive suspension.In a first step, an integrated forwarder simulation model is developed, containing a simplifiedforwarder model, a tire-to-ground interaction model and a test track model. The simplifiedforwarder model is based a rigid multi-body system with a spring-damper suspension of thependulum arms. The tire-to-ground interaction model calculates the reaction forces, friction fromthe ground and applies the propulsion force. The test track model is a simplified version of thereal test track in Skogforsk. The propulsion wheel torque control is used to regulate theforwarder speed.

A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

Det här arbetet syftar till att genom design av en telefonapplikation undersöka hur ljud kan förstärkas av den omgivande miljön. Arbetet visar på hur miljöförstärkt ljud skiljer sig från ljudförstärkt miljö samt vilka begränsningar det innebär att använda en vanlig smartphone som plattform. Ett långsiktigt mål är att genom en produkt som låter oetablerade ljudproducenter distribuera sina alster i den offentliga miljön främja fri kultur och kreativitet.Arbetet har följt principen för RtD (research through design), där designprocessen utgör det fall som studeras och dokumentationen av den utgör den bas av data som analyseras och leder till slutsatser kring ämnet.Designprocessen i detta arbete innebär en mindre omfattande användarstudie i enkätform för att identifiera målgrupp, krav och mål. Följd av en andra studie där en prototyp framtagen med grund i resultaten från användarstudien utvärderas av deltagare genom observation, intervju och reaktionskort. De största utmaningarna för designen grundar sig i att ta fram en applikation som inte stör upplevelsen, men samtidigt kan instruera användaren i hur man använder applikationen. Utifrån arbetet dras slutsatsen att användarinstruktioner, såväl visuella som auditiva, löper större risk att störa upplevelsen i miljöförstärkt ljud än i ljudförstärkt miljö. Vidare konstateras att den största bristen i en lösning som bygger på standardutrustning i jämförelse med en lösning som nyttjar dedikerad utrustning utgörs av begränsningar när det kommer till att ange riktning med hjälp av ljudets rumslighet..

Z39.50 is a standard protocol designed to create an interface between diverse computer databases for diverse information needs. Since it has to be adjustable it is also complex and demands a certain degree of expertise when being set. However, the aim of this paper is not to make a theoretical description but to examine certain conditions in practice. From the perspective of Swedish research libraries two principal hypotheses are examined: 1) the implementation of a given technology (Z39.50) is primarily influenced by social circumstances, and 2) the way in which the technology is implemented will bias the results of information retrieval. For this examination we need a framework of theories concerning the relationship between technological development and society, organisational theories and database theories.

Dyslexi är en funktionsnedsättning som är svår att diagnostisera och som varierar kraftigt i hur individen påverkas. Tillgänglig design handlar om att främja användarvänlighet oavsett användarens förutsättningar och eventuella funktionsnedsättningar. Det finns forskning inom områdena dyslexi och tillgänglighet, men forskning som berör båda områdena samtidigt är bristfällig. Komplexiteten i att förstå och karakterisera dyslexi har lett till att ramverk för tillgänglighet haft svårigheter att anpassa sig efter dyslektikers behov. Utvecklare behöver därför en djupare förståelse för denna användargrupp för att kunna designa ett inkluderande gränssnitt.

Simulations of simulink models using Kalman filters are often very time-consuming. This problem depends mainly on the fact that the Kalman correction has to be performed at each sample instance through the whole simulation. The goal for this thesis work is to reduce that time-consumption for the filtering part (the integration partis treated in a complementary report) of a simulation. Furthermore a Matlab routine to perform parameter tuning and finally a graphical user interface is developed.The filtering part of the simulation in this thesis is based on an Extended Kalman Filter (EKF). The time optimization of this filter considers searching for the possibility to replace the today?s existing Matlab functions that is used to perform the filtering calculations.

In this composition, a study of consignment inventory on basis of the factors which are important for implementation and application of consignment inventory are made. Logistics chain from subcontractor to end customer is becoming more complex when the volume of items constantly increases to satisfy the needs of the market. From that perspective, companies had large inventories but today it is a lot of different solutions to streamline inventory management. One way that recently becomes increasingly common is to let the subcontractor fill up the customers stock using different approaches such as VMI (Vendor Managed Inventory). A further step in the evolution can be to make use of consignment inventory where the vendor owns the stock of the customer.

During the last years, the importance of sourcing in firms has increased. Globalization, fierce competition and an increased level of outsourcing are common explanations to why firms have highlighted the potential to realize savings and the value creation that the Purchasing department can generate. One trend that follows in parallel with globalization is an increased pressure from society on firms to take responsibility for the impact that its products and services have on the environment. This responsibility creates even more attention as outsourcing involves trade with suppliers in low wage countries, where the level of environmental and social responsibility is not always satisfying. The Purchasing department, the firm?s interface with suppliers should therefore, together with the firm?s Environmental department, play a key role in the firm?s contribution towards sustainable development.

With recent technical development computer aided design and manufacturing has taken amore important role in the product life cycle. New business segments such as Product/ServiceSystems and remanufacturing is emerging. This development demands better control of theproduct data throughout the entire product life cycle. Computer aided design is widelyrecognized and used within the manufacturing industries and in recent years the importance ofDigital manufacturing has increased. One part of Digital manufacturing is paperlessproduction which involves all orders and working instruction shown for example on a screenrather than on a piece of paper.