Today, buildings utilize 40 % of the total energy consumption. New energyrestrictions and directives have entered the construction industry. Photovoltaic is asustainable, clean and quiet solution that integrates well in the urban environment buthave not yet reached a breakthrough on the Swedish market. The conditions for solarenergy production are often set in the early planning stages where they rarely arebeing prioritized.This master of engineering project focuses on Identifying problems regardingimplementation of photovoltaic in city development projects and giving suggestions topossible improvements in the planning- and construction process. It also givesrecommendations on how the conditions for energy production can be optimized inthe early zoning stage.By conducting simulations with PVsystV5.21, on three ongoing city developmentprojects in Umeå, Malmö and Stockholm and by carry out and analyzing interviewswith city planners, constructors and architects, some conclusions have been made.Several improvements, both politically, with changes in the subsidization systemand/or instatement of a new law with feed-in tariffs, and within the solar- andconstruction industry itself, with better communication between different parts of theprocess as well as better use of experience, can be made.

Retiring from elite sport can be a difficult and disruptive process for an elite athlete. To improve the quality of the transition after retirement, elite athletes are recommended to have dual careers which mean they combine their sport with education to be prepared for a new career when they retire from elite sport. To help elite student-athletes with this combination, universities and sport organizations provide different kind of support. This study was conducted and aimed to investigate elite athletes? perceptions of support offered by a university in Sweden and the elite athletes? perceptions of combining top level sport and academic studies.

This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as Identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, drawings, orders and decision support documents were supplied by the company.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

The aim of this Master's thesis is to examine difficulties concerning information acquisition, use, and management experienced by graduate students in physics during their first years of research work. Semi-structured, qualitative interviews were carried out with nine doctoral students. The theoretical background for analysis of the material is based on the work of Patrick Wilson, with particular focus on the concept of cognitive authority, and on that of Lars Seldén, who has proposed the idea of an information seeking career running parallel to the academic career of the researcher. Results from the interviews indicate that most of the students, in the early stages of their information seeking careers, rely to a great extent on supervisors and more experienced colleagues when Identifying material needed for the research project. In a situation where information of potential relevance is abundant and where experience and focus are not yet fully developed, senior researchers function as cognitive authorities and as guides to other cognitive authorities.

The purpose of this project is to study Partab's material distribution process, furthermore identify critical problem areas within the company. Further the aim is to provide suggestions to new work procedures regarding material distribution and related processes. Appropriate literature has been used as a support in this process. The main goal of a commercial company is to generate cash flow, and maximize the return on investment. Streamlining material supply and the use of material is a part of this process. Virum and Persson define logistics as: "Logistics is the approach and principles founding the process of planning, development, coordination, organisation, management, and control of material distribution from supplier to user".

This thesis is closely related to the Dynamically Self-Configuring Automotive System(DySCAS) project. DySCAS is a middleware for electronics in an automotive system. Thethesis work has been performed in cooperation with ENEA. Parts of the demonstrationplatform Self configurable High Availability and Policy based platform for Embeddedsystem (SHAPE) developed for the DySCAS project by ENEA have been used in theimplementation phase of this master thesis.The goal of this thesis was to evaluate how the Meteor MW, an offspring of the DySCASmiddleware, should handle QoS and to design a Quality of Service Manager (QoSM) for theMeteor MW that fulfilled hard real-time requirements. The thesis also had the objectiveof analysing and Identifying the requirements on such a QoSM from a QoS perspective.Specifically the requirements to guarantee real-time support for applications running onthe MW.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to Identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The quality of meals is included in the constant improvement of each preschool. The study is carried out on behalf of the City of Malmö and Environmental Management and focuses on this quality work. By compiling a checklist of meal quality and by Identifying what the meal quality means for persons working with the meal (managers, cooks, educators and parents), it is our wish that this will be a help in their quality work. To inspire the composition various organizations working methods and ways to manage, evaluate and make use of different models and tools to improve the dining quality, has been studied. In the literature, the work has received confirmation of theories that emerged during the analysis work of what a meal is and how quality can be measured. The results show that food quality is described as a complex concept consisting of different parts, where the food, atmosphere, service, together form the meal quality. The semi-structured interviews and the inquiry form, have given an indication of the preschool work with quality in the meal activities and it shows that on a wide range and large differences.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of Identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

Digital artefacts such as smartphones have become an intricate part of our daily lives both private and professionally. They have evolved from doing simple tasks to become a form of expression, as well as acting as a gateway to the digital world of connections. We rely on various technology such as Wi-Fi networks to connect with others. They in turn have become more available and today, many establishments offer free network to their customers. With these developments comes different kind of risks for the user.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of Identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

Aim: The aim of this study was to investigate the quality of the social network in regard to young adults, with psychological disorders, and their possibilities to be open about their disease. In addition the study aimed at Identifying possible causes to perceived difficulties by young adults to talk about their disease. Method: The survey was a quantitative study with descriptive design. The data was collected using a study-specific questionnaire on a clinic for young adults with psychological disorders, between 18 and 25 years of age. Out of 123 potential participants 79 (64 %) answered the questionnaire, of which two were excluded because they did not see themselves as suffering from mental illness. Results: The results showed that the participants of the study stated that they had a social network and the majority (90%, n=69) considered they had someone to talk to about their disease, but most of them wanted to be more open about their illness.However, the majority had some form of difficulty to talk about their disease with their social network. The most common specified causes were to feel ashamed of their disease and that the mentally ill persons did not think they would be properly understood.Almost the half of the participant experienced that they had some form of difficulty to be open about their mental disorder in front of health professionals and the most common specified causes was that the participant did not thought that they would be properly  understood  or that they did not felt confidence before the health professionals. Conclusion: Young adults with psychological disease have difficulty to be open about their disease, partly because of stigma.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

Introduction: Mental illness is a public health issue which 20-40 per cent of the inhabitantsin Sweden suffer from. Many factors can lead to mental illness and because of that it isimportant that different organisations and professions collaborate in prevention and healthpromotion work. To develop the collaborative process by noticing difficulties and successes,documenting, follow-up and evaluation is of great importance. Aim: The aim of this literaturereview is to investigate which methods are used for evaluation of health promoting anddisease preventive collaborative projects, which focuses on mental health directly orindirectly, and find out what results these projects has revealed. Method: Literature reviewwith descriptive design.