Within process or manufacturing industries, the production of goods and services or the products themselves may have negative side effects such as pollution. An important task for environmental policy is to control and limit these pollutions, for example via regulatory measures. Although, the efficiency of such measures vary greatly between different industries and an increasingly important task for environmental policy is then to encourage companies to engage in environmentally motivated innovation. Governments can utilize other measures than regulation to indirectly decrease pollution. This thesis aims to analyze such activities and how it affects the innovativeness of wastewater treatment, refrigeration and automobile manufacturing industries.

The Results of this thesis was the creation of two designed house variants with a module toall the apartments. In addition till the first module there are three other modules ofapartments that can be put in the houses if it so needs. The house are volume prefabricatedand are placed on site in a way that it create an enclosure of the area which faces against thenature and car parks also lies hidden behind these houses.For the actual structure, a cross beam was created to carry the floor above and it is supportby all four walls. The structure between the first and the second floor has no "syll" butinstead there are two differently alternative to linking the floors in order so that it will notmove. The reason with this solution was that there will not be any subsidence when theforces from above are pressed down ward.

The purpose of this thesis is to find evidence if cult houses existed on Gotland during the Bronze Age. The cult house is a common term in modern Bronze Age archaeology and the general definitions of cult house are discussed and why cult houses seem to be absent on Gotland. In this thesis the cult house are discussed as a phenomenon, and the possibilities to find Bronze Age cult houses on Gotland are evaluated by making comparisons between Gotland houses with already defined cult houses from the Swedish mainland. Some known cult houses are presented in more detail as case studies, together with house remains on Gotland which could have potential to be defined as cult houses..

This report is about planning a demolition. The purpose of this report is that it should become a base for a demolition of house J at the Academic hospital in Uppsala, and also to make general help for planning a demolition. This report also contains a part about how a change in the work environment affects general people. The work started with studies of literature and design of the general part of the report and then continued with a practical study of house J. From the experience of the first two parts of the report a general help for planning a demolition was shaped.

In this essay, we have compared a conventional house to a passive house. The housesshared the same local conditions; they have the same living area and the same layout. Thedifferences between the houses were the different construction solutions for the roof, theouter walls, the floor and the heating system. Both the houses qualify the standards fromBBR and the passive house also lives up to FEBY?s special conditions.The purpose with the essay was to examine if it really is profitable to build small hoses aspassive houses.

Given that the end-customer has become more demanding, the retailer has to deliver products according to the market demands, which have forced manufacturing companies to constantly search for new opportunities to reduce costs and improve efficiency. It is, therefore important to choose suppliers that are able to compete with the market demands.The market demands in the textile industry have lead to shorter product life cycles, which have caused manufacturers to deliver flexibility with high technology to compete successfully on the global market. To achieve the market requirements the underlying factor is to be aware and optimally use and control time. New technology can have a major influence in the production development, if the company choose to take benefit of the advantages, by optimal allocation of the internal resources the productivity and efficiency will increase, to accomplish a competitive advantage. One way to achieve this is by investing in a Unit Production System.In our thesis we have questioned what the main driving forces for an apparel manufacturing company is when it chooses to invest in new technology.

In this essay I aim to examine how the landscape of Mönsterås might have looked like during the Bronze age in order to get a better understanding of the house urn that C J Ekerot found in a cairn in Fälle. Mönsterås is an area which has a quality of permanence, from Stone Age to Iron Age with its culmination during the Bronze Age. I will discuss the use and symbolic meaning of the house urn. The house as a symbol during the Bronze Age seemed to have had an important place in the cosmology. I will also discuss the importance of cairns, especially in the archipelago areas.

St. Jude Medical Inc is one of the worlds leading companies in the medical technology area with cardiovascular devices as its specialty.Manufacturing implantable medical devices such as Pace Maker Electrodes requires complex design, safe processes and well trained operators. User friendly manufacturing operations are a necessity.Lately there?s been an increase of the manufacturing volume which also increased the number of operators. More operators need to be trained and cross-trained.

A variety of demands have to be considered in the design of a new opera house in Galärvarvet. All possible viewpoints are important to be aware of, as is the need for the new building to be a contrast to the already existing opera house in Stockholm. The restricted site also makes a multitude of demands on the building's design.By rationalizing the layout and structure and also by making the footprint smaller, the complex building of over 30 000 square meters can be fitted and blended into the existing physical context. Unlike the existing opera house in Stockholm, the new opera house shows the rationality and the advanced technology that lies behind the scenes and becomes the character of the entire building. Through the dynamic façade, the new opera can convey any character it so desires, just like scenes do through different settings.

One of the most distinguishing features of contemporary globalisation is production fragmentation, a splitting up of the manufacturing of a good into several different stages. Production fragmentation creates new opportunities through vertical specialization; a country incapable of mastering the entire production process may specialize in the manufacturing of one separate part. The aim of this thesis is to examine to what extent international integration affects a country?s ability to engage in vertical specialization in an industry characterized by production fragmentation. The analysis focuses on the european integration process over the last decade, where countries in eastern Europe with relatively low labour costs have been integrated with more capital abundant western economies.

Construction accounts for about 35 percent of the total Swedish energy consumption and most of the energy is used by the large housing stock from the so-called ?Million program?. In the national action plan the government has put forward in energy efficiency. It is mentioned that existing buildings account for more than 90 percent of what is expected to be the housing stock within the coming 50 years. In order to meet environmental objectives its required that the existing stock be reviewed for energy efficiency. The goverment is now initiating a national framework with a budget of SEK 300 million Swedish crowns per year for five years, starting in 2010 to achieve the goal on energy efficient buildings. Energy efficiency of buildings in both new construction and above all within the existing stock are addressed.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The company Sol & Energiteknik wanted to examine the possibility to make a standardhouse totally energy independent. Based upon this I have, during the spring of 2007,examined the possibilities available at the market today through litterature studies, contactwith several companies and reading reports at the internet.The first thing to examine has been to determine the energy consumption for a standardhouse, and find out if there are better technologies to be used for energy conservation.My conclusion in this matter is that there are possibilities today for building a house moreenergy efficient.When I had reached the point at which my design for the house was decided, I also hadto choose the different products to use to produce energy as well as to store that energy.To produce heat and electricity to the house I decided to use a wind turbine and a solarwater heater.The most difficult part of designing a house that is energy independent is that theproduced energy must be stored somehow. Storing the heat is relatively easy beacuse theheat can be stored in a large water tank. The electricity is a bigger problem beacuse itmust be stored in batteries, which today are too expensive to be used in a standard house.In the future producing and storing hydrogen might be used to produce electricity, buttoday that technology is both expensive and not tested enough.My final conclusion is that a standard house can not be built to be totally energyindependent today, unless it is very expensive to connect the house to the electricitynetwork. As an alternative solution I came up with a proposal for a house which isconnected to the electricity network and have some amount of own produced energy.This house prooved to be a good investment if you choose to build it today, and it couldbe a very good investment in the long run beacuse energy prices increase every year..

The scope of this investigation is to decide how and to what extent the energy consumption of apassive house is affected by the users? knowledge and habits. To achieve this a literary study hasbeen made and as a complement the planning of a passive house was completed.The result of a primary study of the rules and regulations that effect passive houses in Swedenshows that the user?s influence on passive houses is a completely unregulated area. Even thoughthere is no regulation, a need for some general knowledge of the passive house concept has beenexpressed.To further investigate how the users? knowledge and habits affect the energy consumption and ifthere is a difference between different households? energy consumption , three main factors havebeen identified.

During the Nordic Bronze Age, houses were not exclusively connected with profane contexts, but did also feature in burial places, a peculiar fact when considering the careful separation of settlements and graves. What kind of houses do we find in these sacred contexts? What did these houses stand for? Why was the house symbolism chosen to accompany the dead? And why did the house symbolism flourish during the Nordic Bronze Age? To answer these questions three representatives for the house symbolism in Sweden are discussed in more detail, such as the burial in longhouses, peculiar houses called cult houses and house urns. Further, the phenomenon has been put in its temporal, geographic, social and ideological context, where aspects such as trade and settlement structure are presented. The house symbolism is, however, not confined to northern Europe.