GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

An energy calculation model for Swedish houses   that is fast, flexible and user-friendly has been developed within the   framework of this thesis.  The model   also provides a set of actions which may be investigated in the model based   on savings and payback period. Energy use in a house depends on the technical   conditions, such as building envelope and heating systems, which outdoor   climate the house is exposed to and who lives in the house. Energy use for a   house can be divided into heating, hot water and household electricity. There   are several methods to calculate the energy use of a house. This report   summarizes the methods that may be suitable for a fast and user-friendly   calculation model.

Determinants of Small Housing Prices in Stockholm 1993-2009, is an econometric study. Regression analysis is used to identify and measure the dominant factors that determine small house prices in Stockholm. Economical fundamenta and neo-liberal varaibles are in use to explain nominal overprices in the house market, as well as the steady development of real house prices in the region..

Passive houses are a relatively new concept in Sweden and by that it is meant a house without a traditional heating system. The most acknowledged passive house project is the terrace houses in Lindås, Gothenburg, which we have used as a reference. This project concerns a square apartment block. So far, no square apartment block has been built as a passive house in Sweden.The common opinion in the construction industry is that it is not economical to build extremely energy efficient houses. With Peab as commissioner our task was to investigate if that is true, if regarding the construction of a multi storey house as a passive houseMidroc, now owned by Peab, constructed in the block of Preussen in Jönköping during 2004-2005 four houses, with 132 apartments distributed on seven floors.

A variety of demands have to be considered in the design of a new opera house in Galärvarvet. All possible viewpoints are important to be aware of, as is the need for the new building to be a contrast to the already existing opera house in Stockholm. The restricted site also makes a multitude of demands on the building's design.By rationalizing the layout and structure and also by making the footprint smaller, the complex building of over 30 000 square meters can be fitted and blended into the existing physical context. Unlike the existing opera house in Stockholm, the new opera house shows the rationality and the advanced technology that lies behind the scenes and becomes the character of the entire building. Through the dynamic façade, the new opera can convey any character it so desires, just like scenes do through different settings.

Together with NCC and Sweco we measured the air-flow on a semi-detached house in Jönköping. When a pressure measurement is made, the house gets exposed to over- and under pressure. This is done in order to examine the houses climate shell. The climate shell of the semi-detached house we tested exceeded the required air thickness in BBR-2002, hence, measures have to be taken.This report also displays the importance of building air thick houses and what consequences a non air-thick house can have for the ones residing the house. A discussion of different measures is on for the addressed problems with the flow-measurement and the alternative construction-solutions.Furthermore we have described in this report of how to account for the performance of the air pressure, what kind of equipment we used and how we came up with the results.

The aim of the study was to through empirical studies interpret the relation between three partially investigated house foundations, on an abandoned farm in Langhammars on northern Fårö. This relation focused upon two main questions; the time of use and the spatial distribution of the archaeological finds.Trough comparative analysis two of these houses can establish to have been contemporary, the third one is too roughly examined. A discussion about the hypothec idea of two or three contemporary farms was made with a negative result.In house 1 smaller processing of tools of flint has taken place near the fireplace in the larger room. A concentration of pottery was also visible near the fireplace, likely to be connected to cooking and eating. The smallest room in the northeast part of the house could have functioned as a storeroom and/or held workshop activities.The archaeological finds and the distribution of it, strongly indicates that house 1 mostlikely consisted of a dwelling house and house 2 functioned as a workshop; linked to activities with handicrafts.

The project explores the possibilities of using additive manufacturing (3d-printing) to build architecture. Through a combination of theoretical research and practical experiments a building system has been developed which has the capabilities to create houses with great geometric flexibilities to a affordable price today. The construction system Perimeter is demonstrated in a pavilion situated at Norra Djurgården in Stockholm. .

The purpose of this paper is to analyze the project Knitting House using art and architectural theories to question the forms of the project as well as the town planning in the area of Husby, a suburb to Stockholm. In order to stress the architectural issues in the area of Husby, the thesis examines the aim and intention of the project Knitting House. The project explores the standardized architectural form that was used and built under the Miljonprogrammet, through the years of 1960-1970 in the neighborhoods of Järvafältet. The thesis will also investigate some of the problems that arise when attempting to discuss knitting as a method used to perform Knitting House. This paper explores the relationships between public and private spaces, the areas in between them and how they interact. The claim made throughout the thesis is that Knitting House can function as a political catalyst by presenting a combined perspective of art, architecture and politics to address the social and ethnic segregation in suburbs like Husby. .

AbstractTerrace III in the Birka Garrison. An analysis of function based on artifact quantification and find preparation. This paper deals with Terrace III in the Garrison of Birka, Uppland, Sweden. The main purpose is to investigate the function of Terrace III. The analysis consists of two parts.

AbstractAccording to research made by Statistics Sweden on the members of the labor union IF Metall the number of reported musculoskeletal disorders for employees working under the collective bargaining agreement for the automotive industry has almost doubled since 2003. During 2004- 2006 and 2008 male assembly workers were the occupational group with the highest amount of reported work related disorders in Sweden. To prevent musculoskeletal disorders is according to Rose and Orrenius important both for the individual, the society and the industry by reducing economic and personal costs. The purpose of this paper is to identify and analyze how the manufacturing industry is affected by musculoskeletal disorders that occur when working with line assembly and how companies can prevent them. The report aims to provide the reader with an understanding of what musculoskeletal disorders are, to which extent they occur in assembly, how companies are directed by laws and regulations and how they affect the Swedish manufacturing industry and their employees.

This report presents thesis of Liisa Kokkonen in collaboration with Muovikilpi Oy.The project?s goal is to find a new construction for an existing lamp made of acrylic. Form and design retains and the manufacturing occurs at Muovikilpi Oy. The project contains the new construction and manufacturing of the lamp and also a proposition for a set with floor and wall lamp.  The paper gives an outline of acrylic as material and how it reacts with light.

The following article consists of two parts; one part is about house construction and the other is a specialization about radon. The house construction part describes how to project a house from start. It contains the conformation of the house, the installations needed, calculations considering the strength of the construction, energy calculation and what materials were chosen. Calculations considering the costs of building and operate the house has been carried out. The result showed that the house would cost approximately two million Swedish kroner to build and thirteen thousand kronor a year to operate.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

Today all buildings contain some form of home automation. It might be heating controlled by athermostat or motion detectors controlling outdoor lighting.This paper,The Intelligent House, deals with the planning of a house in Kiruna, in the north ofSweden and further immerses itself in home automation or intelligent control in single-familyhomes. The house has been entirely planned, from layout to structural design and plumbing.The purpose of the paper has been to investigate the possibilities in home automation in singlefamilyhomes and to choose a suitable home automation system for the house being planned.The system has been designed and the costs and energy savings have been calculated.The system chosen for the house is called KNX and is the largest system for home automation inSweden. It is used to control heating, ventilation, lighting and alarm systems in the house. Is hasbeen found that KNX is very expensive and that the amount of energy, possible to save in thehouse, using the system, is relatively small.