Sökresultat:
4952 Uppsatser om High temperature electronics - Sida 13 av 331
Klimatförändringarnas inverkan på dimensionerande grundvattennivå
Helsingborg has the intention to build a train tunnel south of Knutpunkten. This report investigates the hydro geological aspects of the project. Questions at issue that will be answered: 1. Which parameters affect the groundwater level? 2. How will these parameters change within 100 years considering climate changes and what will be the consequences on the groundwater level. According to SMHI climate analysis the climate can change causing increasing precipitation, temperature, and a rising sea level.
Höjdförändringar på Lomonosovfonna, Svalbard, 1996-2012
The climate changes and the global warming have a great impact on the Arctic environments. This partially depends on that the albedo is getting lower when snow and ice is melting and exposes more and more dark surfaces of the land and sea. This leads to a feedback effect; the melting accelerates because dark surfaces attract more sun radiation. Because of the heating the glaciers in Arctic retreat. The purpose of this report is to obtain an eventual change in elevation on the glacier Lomonosovfonna that is located on Svalbard by comparing elevation data collected by NASA and GPS data from 1996-2012.
Undersökning och framtagning av ett moduluppbyggt datainsamlingssystem
This report is about a thesis that is performed in and for SYSteam Engineering AB in Motala. The thesis work is divided into three parts, study of the market, programming and electronics. The study part consists of examining and comparing different data acquisition systems for testing of different circuit boards, taking into account the modularity, real-time applications, mobility, environmental, interface hardware and software, to be able to define a general module-based data acquisition system in both hardware and software that enables for future developments.The programming part consists of getting started with Visual Studio, which integrates the Measurement Studio for C#. NET. Measurement Studio includes classes and user controls for testing and measuring and offers tools for acquisition, analysis and presentation of real world data.
Design of a Direct-conversion Radio Receiver Front-end in CMOS Technology
In this Master's thesis, a direct-conversion receiver front-end has been designed in a 0.18um CMOS technology. Direct-conversion receivers (DCR) have obvious advantages over the heterodyne counterpart. Since the intermediate frequency (IF) is zero, the problem of image is circumvented. As a result, no front-end image reject filter is required and the channel selection requires only a low-pass filter, which makes it easy to integrate directly on chip. However, the DCR also suffers from several drawbacks such as extreme sensitivity to DC offsets, 1/f noise, local oscillator (LO) leakage/radiation, front-end nonlinearity and I/Q mismatch.
Design av mikrovågsövergångar
In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.
Analog-to-Digital Converter Design for Non-Uniform Quantization
The thesis demonstrates a low-cost, low-bandwidth and low-resolution Analog-to- Digital Converter(ADC) in 0.35 um CMOS Process. A second-order Sigma-Delta modulator is used as the basis of the A/D Converter. A Semi-Uniform quantizer is used with the modulator to take advantage of input distributions that are dominated by smaller-amplitude signals e.g. Audio, Voice and Image-sensor signals. A Single-bit feedback topology is used with a multi-bit quantizer in the modulator.
Dietary fibre composition and sensory analysis of heat treated wheat and rye bran
When grains of wheat and rye are conventionally milled, large quantities of bran classified as by-products are left and are mainly used for animal feed. Bran is a complex material composed of the aleurone layer, nucellar epidermis, a seed coat, a fruit coat and a small proportion of the germ and endosperm depending on extraction rate. The bran fraction consists of approximately 40-50 % dietary fibre which can contribute to increase the nutritional quality of human cereal food. It would also be valuable for the food industry to convert by-products as bran to products with higher commercial values.
The aim of this thesis was to analyse the content and composition of dietary fibre of heat treated wheat and rye bran according to the Uppsala method with some modifications in order to analyse soluble and insoluble dietary fibre separately. Half of the bran samples were precooked, dried and roasted and the other half dried and roasted (uncooked).
Havsöringens (Salmo trutta) lekvandring i Själsöån, Gotland.
In this study, the sea trout (Salmo trutta) spawning migration was studied in the river Själsöån, Gotland, to assess the main external factors determining upstream migration and seasonal changes in fish parameters. Additionally population trends were studied by examination of old data. The most important external factors for upstream migration were the air pressure, air temperature and wind direction. No significant difference was found between when males and females migrated upstream. Larger females in better condition started migration earlier than the smaller females in poorer condition.
Köldbryggor och energiförluster. En studie om energiförluster genom balkonginfästningar och deras betydelse för byggnadens totala energibehov
In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The reinforcement bar that holds the balcony runs through this heel.
Fint och fult i film : En studie av finkulturell och populärkulturell diskurs i svenska filmrecensioner
The discussion about high culture and popular culture in our society has been going on for decades. In few places is it as loud as within culture journalism and the critics? society, where the question of what is good taste and what is dumb entertainment constantly gets brought to the surface. Film is a particularly vulnerable area, since it is such a universally appealing and rather young medium. In America and England several studies have been performed of the reviewing society and reveiwers? use of high and low art-discourse in their writing.
Skillnader i kommunikationsstil mellan individualistiska och kollektivistiska kulturer
The purpose of this study was to investigate if preferences for high- and low context communication differed significantly between individuals from individualistic and collectivistic cultures, living in a multicultural environment. A quantitative survey was used as method and the survey was answered by 150 students at Jönköping University and Uppsala University. Two self-assessment scales, obtained from previous studies were used to measure the degree of the two cultural dimensions and communication styles. Two multiple regression analyzes were performed to investigate the connection between collectivist cultures preference for high context communication and individualistic cultures preference for low context communication, that has been found in previous studies. Two ANOVAs were also performed to investigate differences in communication style depending on sex and length of stay in Sweden.
Högtrycksbrandsläckning - Ett beslutsunderlag för Räddningstjänsten
The purpose of this report is to collect, compile and complement the scientific and experience based knowledge concerning high pressure fire fighting today. The goal is to produce a decision data for the Rescue Service concerning the use of high pressure systems for fire fighting. Focus is on hose reel high pressure systems but other systems are discussed too. The report begins by describing the technical properties of the different systems. Then the fire fighting properties are evaluated, including manoeuvrability and safety for users.
Direktsamplande digital transciever
Master thesis work at ITN (Department of Science and Technology) in the areas of A/D-construction and RF-circuit design. Major goal of project were to research suitable possibilities for implementations of direct conversion in transceivers operating in the 160MHz band, theoretic study followed by development of components in the construction environment Cadence. Suitable A/D- converter and other important parts were selected at the end of the theoretic study. Subsampling technique was applied to make A/D sample requirements more realistic to achieve. Besides lowering requirements on A/D-converter it allows a more simple construction, which saves more components than subsampling adds.
Lågtempererad fjärrvärme i Umeå
People in today?s society are becoming more and more aware of how important it is to use energy as efficiently as possible. This is clearly noticeable by an increase in home produced heat with e.g. solar panels or heat pumps heating systems. These changing customer demands forces district heating technology to be redesigned, which is why there is an ongoing research regarding the next generation of district heating - low temperature district heating (LTDH).
Energy efficient storage of biomass at Vattenfall heat and power plants
Storage of biomass is often associated with problems such as heat development, dry
matter losses and reduction of fuel quality. The rise in temperature can potentially
cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles
can cause health problems in the surrounding. The dry matter losses and reduction of
fuel quality can have economical effects. The aim of this thesis project is to develop
guidelines on how to store large amount of biomass at Vattenfalls heat and power
plants in an optimal way.