
Sökresultat:
6509 Uppsatser om High production - Sida 4 av 434
Kritiska Prestations Indikatorer (KPI), Hur väl fungerar KPI:er som verksamhetsstyrning inom den producerande industrin?
The purpose of this thesis is to examine how key performance indicators are being used as performance management tools within the production industry. Specifically the purpose is to investigate how the KPI:s within the telecommunications industry drives reusability regarding production test systems. This thesis will also highlight today?s cost models and suggest improvements of the KPI and what new ones could be introduced. A case study at Ericsson AB has been performed.
How strain and production system effects chicken welfare and quality in meat : a literature review
There are several reasons why organic chicken production is scarce in Sweden. Lack of slow growing (SG) strains combined with higher production costs, lower meat-yield and uncertainty of consumers? willingness to pay seems to be the main reasons. EU-legislations imply use of indigenous slow- or medium growing strains in organic production, nevertheless, fast growing (FG) broilers are often used due to their effectiveness. Increased consumption of processed food creates a market for conventionally rearing of very heavy broilers.
Uppfödning av gyltor till hållbara suggor
Half of Sweden?s 140 000-150 000 sows are culled and replaced by 75 000 gilts annually. Culling of old sows is necessary and allows new breeding material to enter the herd. However, many of the culled sows are young, and have not yet become profitable at the time for culling. Therefore, it is an important question for the pig industry, how to raise gilts to sows with a high and sustainable production level.
Tjäna pengar som gräs? :
The producers of grain in Sweden are facing a rough future. The competition is getting harder all the time, in Sweden, in EU and also from the ?world market?. The producers have to be more efficient and have to have bigger units. Many producers might have to look for new alternative production opportunities.
Detaljhänsyn efter slutavverkning : kvantitet och inverkan på framtida produktion hos SCA i Västerbotten
According to FSC (Forest Stewardship Council) shall at least a mean of 10 trees per hectare including riparian zones and other areas with high biological values be left in final felling. In addition large clear areas should not be created and all retained trees with high environmental value shall be spared. To leave trees in final felling means a lower cutting volume and hence a lower income from the cutting, but it also means that the production in the next generation becomes less because of competition. The aim of this study was to evaluate the effect retained trees have on the production in the new generation of forest, and to investigate if there is any way to lower this effect. The environmental care has also been estimated by the amount left in final felling.
Produktionsoptimering av Kv. Hunden
For many years, there has been a housing shortage in Sweden. Many have been expecting a construction boom in the housing sector, but that has yet to arrive. With the current legislations and guidelines surrounding modern, energy efficient housing; production costs have increased dramatically in recent years. As a result, having a negative effect on housing production despite the high demand for homes.This exam work is carried out on a construction project of Sjötorpshus AB and its purpose is to evaluate how to optimise the construction process for the production of a new residential settlement, "Kv.Hunden", located in Katrineholm. In an interview with the company's MD, Pär Knutsson, four main issues were defined to focus on.
Kritiska Prestations Indikatorer (KPI), Hur väl fungerar KPI:er som verksamhetsstyrning inom den producerande industrin?
The purpose of this thesis is to examine how key performance indicators are
being used as performance management tools within the production industry.
Specifically the purpose is to investigate how the KPI:s within the
telecommunications industry drives reusability regarding production test
systems.
This thesis will also highlight today?s cost models and suggest improvements of
the KPI and what new ones could be introduced.
A case study at Ericsson AB has been performed.
Den brasilianska nötköttsproduktionens framtida utveckling :
To value the risk and opportunity for our production in Sweden it is necessary to understand the marketing development for beef cattle production in the world.
We have chosen to look at the Brazil beef cattle production. They are one of the biggest producers, have good opportunity to develop further and have a big affect at the world market.
The method of our work is to gather information from experts of beef cattle production, located in Brazil. We have also gathered information through studies of literature.
The factors that will have a big influence at the Brazil beef cattle production during the upcoming years is more efficient land use, lower age of slaughtering and extended use of feedlot-system.
Our conclusion is that the Brazil beef cattle will have a sharp increase during the next five years. The amount of pasture will not change during that time.
Ekonomin under omläggningsåren vid övergång till kravgodkänd produktion :
The purpose of these theses is to show the financial economical situation during the change from conventional dairy production to ecological production. The thesis is accomplished by collecting information from literature and interviews where needed.
The target group of these theses is dairy producers who will transform their production from conventional dairy production to certified ecological dairy production. The theses emphasise on the economic situation during the adjustment years. For this I have studied a presently producing dairy farm.
Integrering av pelletsfabrik med Rya kraftvärmeverk i Göteborg : en teknisk och ekonomisk utredning
Göteborg Energi has a surplus of district heating during spring, summer and fall. The heat surplus is due to a constant production of waste heat from oil refineries and heat from waste incineration over the year. It would be desirable to increase the demand for heat and the uptime for the newly built combined heat and power generation plant, Rya Kraftvärmeverk. One alternative could be to integrate Rya Kraftvärmeverk with a pellet production facility. By producing heat, electricity and pellet in a joint process the energy use can be decreased.
Vätedriven förbränningsmotor : Klarläggande av framtida hållbarhet
Today when new and harder demands on CO2 emissions are developed, vehicle manufacturers must work to develop new engine solutions to new kinds of fuels to replace fossil fuels. A fuel that could be applied is hydrogen. When hydrogen is combusted only water vapor occurs. Hydrogen is known to be explosive and flammable. These properties are both good and bad for combustion.
Optimering av SNCR-system i en biobränsleeldad panna : möjligheter till minskade NOx-utsläpp för ENA Energi
Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.
Biologiska behandlingsmetoder för rening av rejektvatten från biogasproduktion
In this literature review the characteristics of two free-floating macrophytes, water hyacinth (Eichhornia crassipes) and duckweed (Lemna sp.), and two microalgae, Chlorella and Scenedesmus, have been examined regarding their suitability as efficient nutrient removers in the treatment of wastewater with high levels of nutrients and suspended solids from a biogas plant in Loudden. The needs required for the plants to be able to grow in wastewater and the amounts of biomass they can produce have also been studied. The results show that Chlorella is capable of a very high uptake of nutrients in photobioreactors with high nutrient loadings. With an ammonia uptake maximum value at 10900mg/m2/d Chlorella outshines the other organisms in this study. The test organism that performed the closest to Chlorella in terms of nitrogen uptake was water hyacinth with an uptake about 1602mg/m2/d.
Konsekvenser för äggproducenter efter förändring i djurskyddslagen avseende inhysning av värphöns :
The avowed aim in this project was to see how the Swedish egg production is today. My first question was if the Swedish egg producers egg production turn a profit. I have done five after calculation at five different egg producers with different systems from case to case. The difference has been the living system, the fodder and the egg price.
They made a report in Uppsala, Sweden (Hoffman & Andersson, 1996), where the look forward to a Swedish cage ban and made calculations after that coming ban. After that they lift the Swedish ban of cages and the egg producers could invest in new cages who called the decorated cage.
Effektiv Planering enligt Lean Production : En fallstudie på Sandvik Mining and Construction
Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.