Higher demands of competitiveness and efficiency have led to increasing sizes of farms, with more land, more capital and more comprehensive logistics. The aim is to gain benefits of scale economies that reduce the production cost per unit. However, a greater extent of the business exposes the farm of increased risk where small deviations rapidly can erase the benefits. A modern dairy farm thus put high demands on the farmer?s ability to coordinate, plan and manage the forage production through the whole process until storage to obtain silage of the desired quality and quantity at the right price. The objective of this study was to design a simple model, i.e.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

Konkurrensen i tillverkningsfo?retag o?kar sta?ndigt och detta medfo?r att det sta?lls ha?rda krav pa? produktkvalitet och fo?rma?gan att leverera produkter i tid. Fo?r att fo?retag ska kunna na? upp till dessa ma?l kra?vs utveckling och sta?ndiga fo?rba?ttringar i takt med den va?xande marknaden. Detta uppna?s pa? olika sa?tt men ett vanligt sa?tt a?r att arbeta med fo?rba?ttringsmetodiker.

The main purpose of this Master Thesis has been to investigate issues concerning apple fruit quality in orchards of Äppelriket Österlen. The goal has been to develop a document, for future benefit towards growers and company management in the production of high quality apples.In order to investigate main issues of fruit quality, focus has been on statistics concerning apple varieties, age of the apple trees, new planting, orchard size and growers opinions. Nine growers have been interviewed to investigate opinions and contribution of different growing techniques to increased fruit quality. The investigation showed high age of the trees in production and low rate of planting of new trees. Differences in fruit quality were highest between small orchards. Most growers were satisfied with their fruit quality and with their own measures made to improve it.

Millions of preselected progeny have been born since the development of The Beltsville Sperm Sexing Technology 1986. The method is based on flow cytometry and sorting is done on the basis of DNA difference of the X- and Y-chromosomes. Preselection of progeny provides an opportunity to obtain genetic gain and increased production as well as increased animal welfare and decreased environmental impact. However, the method is associated with low fertility, high costs and uncertainty whether the sorting process contributes to DNA damage and thereby results in genetically impaired progeny. Today, sex sorted sperm is only commercially available in the bovine industry, due to the fact that bull sperm is more suitable for selection than sperm from other species.

This report contains results of our study at CTC in Ljungby. CTC produces heating products such as boilers, heat pumps and additional products to their heating systems.The purpose of the report is to make a proposal how CTC will supply their new production line for heat pumps with materials. The proposal includes a production layout and a scheme for how to place the material in the production storage.The new production line will produce two different products and both of them have several variants. The line will also have a mixed flow, so the products can be produced in a random order. These conditions demand that the production line has great flexibility and that the material to all the variants can be stored in the production storage.With these conditions as input we made a layout proposal to the company.

Methane (CH4) is a greenhouse gas (GHG) that contributes to the global warming. One of the largest sources of methane is livestock, preferably ruminants which alone counted for 30% of the total agricultural anthropogenic methane emissions in the year of 2000. The reason to why ruminants are such large contributors of methane are that the gas is produced in the rumen by enteric formation and leaves the animals by belching, exhaling or by the excreta.Diets high in concentrates can result in a lower emission of methane. Also diets with a high content of starch, such as alfalfa-grass, have a methane-decreasing. It is profitable to reduce enteric methane formation since that form of methane is unavoidably lost.

As demand for renewable energy is increasing rapidly, the market for biomass pellets is expected to continue to grow in the near future. Most of the new raw materials that are discussed for pellet production have one thing in common; the production costs will increase compared to using traditional raw materials such as sawdust and planer shavings. The aim of this thesis is to investigate to what degree increased use of new raw materials for pellet production will affect the general pellet prices in Sweden and to survey what plans Swedish pellet producers have concerning new raw materials. To investigate the raw material situation of the Swedish pellet producers an industry survey was performed. Literature studies were also made on previous research in the subject field. Calculations of the production costs for pellets were done for the raw materials sawdust, wet sawmill chips and energy wood respectively. New raw materials are already used by the large-scale pellet producers in Sweden.

The heterosis effect and breed group effect of crossbreds between Swedish Holstein (SH) and Swedish Red (SRB) was estimated in this study. Observations on cows born between 1990 and 2012 were used to estimate the heterosis effect and breed group effect for several traits included in the Nordic breeding goals: production, fertility, udder health, calving performance, survival and other diseases. Breeding within the Holstein dairy breed has earlier been focused on increased milk production and conformation. This, combined with an intensive use of individual animals, has resulted in a radical increase of milk yield in the Holstein dairy cow population all over the world. However, this breeding strategy has resulted in increased inbreeding and several functional traits have impaired.

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

Changes in the environment are affecting the world market, and pressures from several stakeholders? are forcing different enterprises to adjust to the current situation. Farmers? difficult working conditions and environmental impacts of the conventional cotton production in India have been highlighted. The small-scale production that is characterising India?s cotton farmers implies an insufficient competition power.

The Swedish processor Findus contracts approximately 500 pea producers annually to secure the company?s supply of green peas for human consumption. A production contract, which has had roughly the same design for decades, regulates the relation between Findus and the pea producers. Agriculture is typically a risky business. The main sources of risk in agricultural production are production risk and price risk.

Femsjö is a small parish situated in Hylte municipality, Växjö diocese. The parish has a total area of 8230 ha of which 5000 ha are covered with forest. There have not been any large industries in the parish offering work opportunities for the inhabitants, so they have had to generate income from their land and the forest. Instead of going to the bank to get a bank loan the people of Femsjö parish went out in to the forest and harvested trees for timber and extra cash revenue. Production of pine tar and potash were two other ways that the residents of Femsjö parish could earn extra money for the household in order to keep starvation away.

In a sustainable society the use of renewable energy and recycling of materials is of high importance. Wastewater treatment plants use large amounts of energy in the processing of wastewater. This study seeks to evaluate wastewater as an energy resource and to examine treatment plants potential to become sustainable energy producers. The study is based upon the internal processes of Himmerfja?rdsverket.