Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.

The interest for locally produced food is increasing due to consumer concern about the environment, distrust of industrial foods and a demand for high quality products. Apple is the predominant fruit crop in Sweden, and by processing apples into cider and vinegar, these products could significantly contribute to the development of the market of local foods.In this study different yeast types and different bacterial cultures were evaluated for their suitability in cider and vinegar production from cloudy apple juice. Ten apple cultivars (Aroma, Baldwin, Belle de Boskoop, Bramley, Cortland, Gravensteiner, Ingrid-Marie, Jonathan, Rubinola and Spartan) were also evaluated for their suitability for production of juice, cider and vinegar. Chemical analyses including total soluble solids, titratable acidity and total phenols were performed on the products along with sensorial evaluation by taste panels.The yeast strains were shown to have an effect on fermentation rate and the resulting content of total phenols in ciders fermented from cloudy apple juice. Dry commercial starter strains gave a higher appreciated cider compared to cider that was spontaneously fermented, and the ale yeast Safale S-04 was concluded to be the most suited for fermentation of cloudy apple juice.For vinegar production, the bacterial culture had an effect on TSS, but not on any other chemical or taste characteristics.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

In this report two Sustainability Life Cycle Assessments are carried out for two types of tiles for Riksbyggen, to contribute to a sustainable urban transition. Sustainability Life Cycle Assessment involves performing a life cycle assessment based on four principles based on scientific research and presented by the non- governmental, non-profit organization, The Natural Step. The principles concern raw materials, chemically produced substances, degeneration of nature and social conditions.Origin of products, manufacturing sites and manufacturing procedures were initially completely unknown and much of the work has consisted of finding the entire cycles, understand manufacturing processes of ceramic tiles and evaluating what materials and what type of energy sources that are required for the production. A socially sustainable perspective has been of high relevance alongside an ecologically sustainable perspective.The report begins with the basic underlying facts and the purposes of this investigation and that the reasons why Sustainability Life Cycle Assessments are carried out are to provide Riksbyggen and the own workers with documents presenting Riksbyggens ideas regarding sustainability and to hopefully get the ideas further down in the supply chain. The methods used to fulfill the investigation are presented and scientific facts about LCA and ceramic building materials are reviewed.

Hammarby Sjöstad is a new district of southern Stockholm built with focus on reduced environmental impact by recirculation of materials and sustainability. The environmental goals aim to cut the water consumption by half and a separate storm water treatment. Thus, the wastewater will be more concentrated and will originate from the households only. The Sjöstad project includes the idea of a local treatment plant for the household wastewater. To evaluate this possibility, Sjöstadsverket, an experimental treatment plant was constructed.

My purpose with this work is to find out how it relates with pre-schoolteatchers view about a quality in comparasion to control document, Lpfö-98, and with factors pre-schoolteatchers consider effects quality in pre-school describe pre-schoolteatchers view on that high quality is in pre- school.The investigation has been done by quality interviews with five pre- schoolteatchers working in pre- school. The results show that they do not make a difference between what are high quality and the factors that affect the possibility of creating high quality. Most important is qualified and engaged educationalist in the pre- school who who shows a good attitude towards the children, and where development and learning is central. The most decisive to a pre- schools quality are the personell who work there. A conditon to achieve high quality in pre- school is a head who knows the pre- school activity and its curriculum, and who takes active part in the activity, invites to discussions and offers pertinent competence development.According to the leading document Lpfö-98 you will achieve high quality by offering children rear and care.

Dairy farming in Uganda provides a source of food, employment and income. Previous studies have revealed high frequencies of bovine mastitis, a costly disease for the dairy farmer. The aims of this study were to investigate the bacteriological panorama in milk from udder quarters with clinical (CM) and subclinical mastitis (SCM) and to determine the antimicrobial susceptibility in staphylococcal isolates. Further, we intended to establish the prevalence of subclinical mastitis and to investigate some environmental factors and animal properties that might influence the frequency of mastitis. For CM, farmers made contact with the members of this study when recognizing an animal with CM.

Major changes within the agricultural politics today have forced the dairy production to scaleup, in order to compete on a global market. This has resulted in a reduction in the number ofsmaller dairy farms in Sweden, from about 40000 to just over 4000 over the last 30 years. Thepurpose of this study Svenska mjölkbönder, snart ett minne blott? ? Markbygdensmjölkbönder i tankar om mjölkproduktionens nuvarande situation och framtidsutsikter, is topresent the opinions of dairy farmers in Sweden, regarding the Swedish dairy industry and therelation to their own dairy production. A secondary purpose is to problematize how theconsequences of pastures and cultural landscapes influences human society as dairy farms andgrazing animals are becoming fewer.

Cross-suckling, i.e. when an offspring nurses a female other than their own mother, occurs in pig production systems where sows are group housed during lactation. As production systems where several sows and their litters are housed together during lactation are getting more common, the need of knowledge regarding cross-suckling increases. The overall aims with this thesis was to investigate how sow behaviour and productivity are associated with the occurrence of cross-suckling, and to investigate consistency in sow nursing behaviour related to cross-suckling. The study included information about the first 4 parities of 40 LxY sows kept in outdoor and indoor production environments. Sows were single housed the first 2 weeks after farrowing and group housed (4 or 5 sows per group) from 2 weeks after farrowing until weaning, 7 weeks after farrowing.

The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.