The actual project presents the development of a testing rig for a steam engine. A short overviewabout the development of steam engines is presented, until arriving to the development of thepresent engine, which will require to be tested in different ways.The testing rig studied on this project (based on a Lanchester engine) will be used to testdifferent materials and layouts for the group Piston-Cylinder.The engine is a high performance steam power engine, which is going to have a highpower/dimensions ratio, what will lead to require high performance components and materials.An introduction to the testing rig is presented, and the entire design project is done in order toreplace the disappeared documentation of the current testing rig, built on the 1970?s. Also somemodifications done in the original testing rig are presented, as well as some detected problemsand their possible solutions..

AbstractOutsourcing is a business strategy that has developed over the last 40 years. Outsourcing means to let another company do some activity within the company, for example production.The thesis for this paper is: How is outsourcing used in a manufacturing company today and how is the resource efficiency affected by it? The research is divided into two parts, a theoretical part and an empirical part. The theoretical part consists of a study of literature. The works in this study is books, text books, bachelor thesis paper and scientific articles.

Increasing the use of biofuels is an important part of achieving the EU?s target of 10 percent renewable energy in the transport sector. However, the competition between biofuels and food production is an ongoing concern. Also, several studies have indicated a significantly higher climate impact than was earlier estimated, due to emissions from land use. In Sweden, both the use and production of biofuels from crops have increased substantially during the last decade. The purpose of this project is first to present an overview of the Swedish land use in all sectors.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

The aim of this report was to investigate if Sweden can have 100 % renewable electricity production in the year 2050. The conclusion is that it is possible but under certain conditions. For instance wave power must be in commercial use. When wind power and solar power represent a large percentage of the electric production there will be a lack of electric power during the winter but during the summer there will be a surplus of electric power. Both the surplus and the lack of electric power need to be taken into account.

Generally in Macedonia keeping farm records and farm business planning is not often practiced like an ordinary activity in farming. Therefore one of the crucial things to do it is to comprise and continuously practice record keeping of farm data. The efficient and justified farm business planning should be based on farm records about the previous work of the farm, which will bring a structured approach for planning all the activities, as well as provide a good basis for attracting investors and creditors for the additional expansion of the business.Given that sheep breeding holds an important part of the livestock production in Macedonia, there is a need for adding analytical sheep enterprise budgets to support the farm business planning process at sheep farms.The aim of this research was to develop sheep enterprise budgets created on the best production practice for Macedonian conditions of breeding and test their applicability into the farm business plan model Agriwise Macedonia. The sheep budgets were composed with a process of data collecting consisted of direct farm data (for the cases), expert's consultation and relevant desk research, as well as a literature study. The aim of doing it was to attain more accurate calculations of the enterprise budgets, which will result in a more precise outcome in the farm business plan model Agriwise Macedonia.

This paper investigates the compensation for risk in the context of the Swedish stock market with a special focus on downside risk. Using daily market data collected from the A-list of the Stockholm Stock Exchange between the years 1983 and 2005 the purpose is to answer the question whether Swedish investors are compensated for holding stocks with high downside risk, measured as downside beta. Using panel data analysis it is shown, in accordance with most previous evidence in international research, firstly that stocks with high beta values on average experience higher returns than stocks with low beta values, and secondly that stocks with high downside beta values experience higher returns than stocks with high beta values in general. On the other hand, cross-sectional regression methodology using a bivariate regression approach shows that downside beta does not explain excess returns very well. Instead, regression analysis suggest that high upside beta does a much better job in explaining excess return over this time period compared to downside beta.

This Master thesis was written for Lantmännen Agroetanol in Norrköping concerning the layout of their finished goods inventory and unloading of feed after introducing a new product mix. Lantmännen Agroetanol has two production lines which produces feed. Both lines lead to six silos, used as inventory of finished goods. The feed from the two production lines differ in terms of quality, where as Lantmännen Agroetanol wants to separate their finished inventory in order to charge a higher price, by selling the better product as a premium. With two different feed products the yearly revenue is expected to increase which motivates a research about the current capabilities and necessary changes to be made in the factory.

The purpose of this Master Thesis is to analyze what suitable hardware platforms there are on the market in order to build a low price control and information system for mobile applications, called small display module. The thesis will be underlying material for making a decision for further development. The result of the thesis consists mainly of a Windows CE kernel and a schematic for a CPU card, on which it would be suitable to build the display module. Another major part of the report is the introduction of different techniques that could be of interest when designing a processor based system. The processor architecture that was chosen is the x86.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

A qualitative study of high school student teachers' ideas about libraries and school libraries.Interviews have been conducted with future teachers about the library's role in their education,their views on library functions in high school and whether they as teachers will use theschool library. The results show that the students have had some instruction concerninghow to use the library as students, but very little as regards their future teaching. The professorsof teacher education focus on the fact that the library should be used in high schoolteaching, not how to use it. Despite this, the student teachers look very positively upon libraries.Libraries play an important part in their education and they are all sure that they asteachers will use the school library, which includes interacting with the librarian. To them, themost important school library function is to allow pupils to seek information..

This final thesis aim to create a support that can decrease the uncertainty when planning the cable drum flanges lines that produces cable drums in the interval 100 to 320cm in diameter at Vida Packaging in Hestra. The purpose attains through finding an optimal batch size that minimizes the total storage cost and order prime cost, without degenerate delivery capacity to the customer. Through survey the sale and stock balance development during 2005 and 2006 for cable drums in Hestra and give alternative suggestions how to plan the production after installing a new cable drum flanges line. The study also explores different ways of working during product change in existing nailing line, to minimize the order prime cost. Vida Packaging in Hestra is a part of the Vida group, which is Sweden?s largest privately owned sawmill group with seven sawmills placed all around southern Sweden.

Considering that the current technology is constantly improving, it becomes increasingly important to have an efficient logistics in a company to maintain profitability while achieving a competitive business. Efficient logistics may be accomplished by improving the internal materials handling. In this thesis the internal material handling of steel frames has been studied at a factory in Vaggeryd. The goal of this study is to investigate the problems that exist with the current production flow of products and provide suggestions on how it can be developed to reduce unnecessary handling and movement.The study has a deductive approach where the authors has been using literature studies parallel with empirical analyzes conducted at a company to achieve the purpose of the study. Documentation from the company and interviews with staff and observations form the basis for the data collection carried out.

Envirotainer builds containers that are specialized in transporting of temperaturesensitive products these containers are customized for airplanes. The containers arethen leased to other companies, most often to pharmaceutical companies.Envirotainer are based in Lagga, Knivsta. It is also here where the production of thecontainers is held. The container RAP T2 was designed in the early 80ies. The RAPT2 contains a fleet of about 1220 containers spread all over the world.

Claw health has been recorded by claw trimmers at trimming in Sweden since 1996, but data was then captured at each AI association. From 2003 data was captured by central scanning and entered directly to the national cow data base at the Swedish Dairy Association (SDA). This reporting was introduced because SDA wanted to be able to use these records to improve dairy cow claw health by breeding. It is desirable with cows that have healthy claws, because poor claw health can contribute to impaired production and fertility. The claw health report begins with some information about herd, claw trimmer, date et cetera and continues with the part where the claw health is recorded. Here the ID of each cow is filled in and on the same row the conditions for dermatitis, heel horn erosion, sole haemorrhage and sole ulcer are recorded as no lesion (blank), slight lesion (/) or severe lesion (X).