The production of ferrochromium alloys at Vargön Alloys AB contributes to formation of unwanted ferrochromium dust, which contains toxic Cr(VI). The dust is since summer 2005 treated with an iron-sulphate solution to reduce Cr(VI) to the non-toxic Cr(III). A year later the treatment technique was improved and disposal occurs in cells on the landfill. The cells can be up to 300 m3 and the edges can be made out of fro example concrete. Tests are conducted on the treated dust when it is disposed.

Problem areaAlfa Laval is a world leading company in the heat transfers area and have the vision to continue to be that in the future as well. The company has a lot of press lines where the utilization is high and also has started to become old. Prognosis shows that there is an increased demand of heat exchanger in the future. This increased demand is not something that existing lines will manage. To build new lines cost a lot of money and take time so it is essential that new lines are correct from the start and not need to be rebuilt or a lot of time spent to trim it.GoalThe goal is to achieve 100% theoretical utilization of the press (the press shall press the amount of plates it is designed for).

The purpose of this essay was to find out if it is possible to:? Detect different groups of gender among children in grave materiel and church art and if that was the case, in what way?? What different groups of children can be seen in these two categories?? What does the material say about children's position in society? The time span is from early Christian time to 17-th century and the geographical region is Sweden and Denmark. I got my information from published literature and different pages on the Internet. The conclusions were that gender among children can be detected in both types of material but different groups were not ?visible? to the same degree.

Understensho?jden is Stockholm's largest eco-village which was built in the early 1990s with the vision of enabling ecological living for people. However the ecovillage is no longer considered as environmentally friendly because of its relatively high energy consumption, and non-updated energy system. The purpose of this study is therefore to investigate how Understensho?jden should reduce their energy consumption and upgrade its energy system by using Blower-Door, IR-camera and Design Builder.

Tall (Pinus sylvestris L.) är ett av Sveriges viktigaste trädslag. Med ökad efterfrågan på vedråvara samt ökade krav på naturavsättningar är det viktigt att öka produktionen i skogen. Röjning och tidig gödsling ger ökad volymproduktion men kan ge icke önskvärd påverkan på vedegenskaper som ökad mikrofibrillvinkel (MFV). MFV är vinkeln mellan mikrofibrillerna i cellväggens S2-lager och cellens längdaxel och påverkas av ståndort samt konkurrensen om ljus och näringsämnen. Höga MFV resulterar i sämre kvalitet på papper och sågade trävaror.

Simulations of simulink models using Kalman filters are often very time-consuming. This problem depends mainly on the fact that the Kalman correction has to be performed at each sample instance through the whole simulation. The goal for this thesis work is to reduce that time-consumption for the filtering part (the integration partis treated in a complementary report) of a simulation. Furthermore a Matlab routine to perform parameter tuning and finally a graphical user interface is developed.The filtering part of the simulation in this thesis is based on an Extended Kalman Filter (EKF). The time optimization of this filter considers searching for the possibility to replace the today?s existing Matlab functions that is used to perform the filtering calculations.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

Understensho?jden is Stockholm's largest eco-village which was built in the early 1990s with the vision of enabling ecological living for people. However the ecovillage is no longer considered as environmentally friendly because of its relatively high energy consumption, and non-updated energy system. The purpose of this study is therefore to investigate how Understensho?jden should reduce their energy consumption and upgrade its energy system by using Blower-Door, IR-camera and Design Builder.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

The importance of energy- and environmental issues has increased, and the work towards reducing carbon dioxide emissions plays a major part. The European Union has set up goals for the membership countries to work towards this to happen. The carbon dioxide emissions in Sweden have been reduced the last few years, but there is still a lot to do. About 30 per cent of Sweden?s carbon dioxide emissions generate from energy usage related to housing, this is why the housing sector is of interest to examine.

Today a lot of goods is transported on wood pallets because it?s practical and enabels a fast way to load cargo. The drawbacks with pallets are that they weight a lot, are big and are relatively expensive. Therefore IKEA has developed plastic lists that can replace the europallet in some applications. In this examwork an automatic handling equipment for plastic lists are design from a requirement specification to a finished machine.

Diabetes mellitus is an endocrine disorder affecting a range of different mammals, including dogs, cats, horses and humans. Worldwide, 347 million people have diabetes, and the disease is an increasing burden on the world?s poorest countries. The disease is characterised by chronic hyperglycaemia and afflicted individuals experience increased thirst, polyuria and weight loss, sometimes despite increased appetite. Diabetes mellitus is either insulin dependent or non-insulin dependent.

SMF Skogsentreprenörerna is a nationwide organisation for Swedish forestry contractors. It has about 750 organised companies with somewhere around 1500 logging machines. These machines perform well over 50% of all yearly landed wood in Sweden. The members of SMF also performs more and more of other functions in Swedish professional forestry, such as soil scarification, planting and pre-commercial thinning of younger stands. In order to determine what major priorities SMF should focus on in the future a member survey was initialised and carried out by SMF together with Daniel Larsson-Snygg, student at the swedish university of agricultural sciences SLU. This report presents the result of this survey sent out to all members of SMF. It is intended to answer a number of questions about their entrepreneurship such as: What different kinds of work do these companies perform? How many machines and employees do they have? How old are the company owners and their employees? What are their thoughts about the future of their business? How well does SMF serve their members needs?.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

This report is intended to give an insight in the Network Performance Assessment Modeland the parameters that is needed in the making of a fictitious grid that represents anoptimal grid. A main goal is to investigate how the construction of a real grid iscompared to the fictitious.One of the key parameters is how redundancy is treated in the model and to find theoptimal amount of redundancy versus the costs. Further is the dimensioning of the grid ofinterest. The fictitious grid is based on energy whereas the real grid often is based onsubscribed power and these two principles are compared and analyzed.The difference in the outcome of the model result due to variations in input data of themodel is also discussed in the report..