In 2013 a new emission standard for heavy trucks was introduced and hence a number of new parts was brought in to Scania CV AB. This created a need for modifications in the silencers flow. The flow is highly complex involving several suppliers, call off methods and different models of silencers. The aim for this project was to improve the existing silencers flow. The flow, from supplier to assembling, has therefore been mapped.

The purpose of this thesis was to investigate if Swedish agencies preserve their websites according to the Swedish archival legislations and guidelines. As a theory the OAIS Reference Model (Open Archival Information System, developed by US Consultative Committee for Space Data Systems, CCSDS) has been used as a model to show how important it is to develop strategies for public digital information which has to be preserved for long term. The ingest function in the OAIS Reference Model demands that files are prepared for long term preservation and requires that the digital information fulfils established technical requirements.In the study the Swedish National Archive and their advices about preserving websites to archivists on the Swedish agencies are being studied. To control if the agencies meet the requirements for their management and preservation of their websites a survey was sent out to investigate if Swedish agencies preserve their websites. According to the survey result, 84 of 113 agencies preserve their websites in some way. If the technical requirements really was met could not be verified in this thesis, the results was relied on the responses from the authorities.

Med dagens växande besättningar är det svårare att upptäcka brunst hos mjölkkor genom visuell observation. Detta leder till ekonomiska förluster, minskat genetiskt framsteg, högre inkalvningsålder och längre kalvningsintervall. För att underlätta brunstregistrering i besättningarna finns olika automatiska registreringar som kan upptäcka fysiologiska eller beteendemässiga förändringar som framträder hos kon vid brunst. Denna litteraturstudie sammanställer tre olika principer för brunstdetektering; visuell brunstdetektering, stegräknare och bestigningsdetektor, som kan vara antingen elektronisk eller manuell. Resultatet visar att stegräknare är den metod som upptäcker flest brunstperioder medan visuell observation ger minst felaktigt detekterade brunstperioder.

The design of the building envelope affects the energy consumption of a building. As the energy requirements for new buildings are becoming more demanding, the performance of the building envelope must be improved. Energy efficiency and durability are important attributes to consider.This report includes investigations of the building envelope, moisture and passive solar energy. It is based on the analysis of two different buildings with different designs. These buildings stand as reference for two of the companies who are working on a new, climate smart, residential area in Uppsala, Sweden.Studies and analyses on energy consumption and moisture transportation were made.

Recent turmoil surrounding nuclear power as an energy source, especially since the accidentat Fukushima, has largely contributed to the debate of whether or not nuclear power should beused as an energy source. This study has examined the economic feasibility of replacingForsmark?s 3rd nuclear reactor with a bio fueled power plant, and find out how this could bedone.The power generation that has to be replaced is equal to 1170 MWe. To replace this, 6 largescaleCFB-boilers, each providing over 200 MWe, were necessary. In addition to this, eachboiler required their respective turbine sets, comprising one high-pressure-, and one lowpressureturbine with intermediate reheating capacities.Based on this, a rankine-cycle was modeled using the software EES, to be able to calculatethe total heat required in the power plant.

The Swedish government has introduced a goal to reduce the energy intensity by 20% to the year 2020. To reach this goal actions need to be taken throughout the energy sector which includes residential and commercial buildings. This thesis considers the possibility to reduce the energy usage in a building located close to Uppsala. The analyzed building is a combined office, cafeteria and entrance and was completed about half a year before this project started. Therefore the measures presented for a more energy efficient building are presented as measures for future constructions.Simulations have been made in VIP-Energy, a dynamic energy calculation program.

The latest thing in the area of environmental building today is energy-plus-house. The idea behind the energy-plus-house is to create a house that produces more energy than it consumes. To accomplish this, the house uses renewable energy, in this particular case solar energy. With the help from a proper construction and thoughtfully projected installations you can achieve a surplus of energy. The surplus energy can then be sold to the surrounding buildings and thereby conduce to a financial profit for the household.

Information Technology (IT) makes it possible to electronically distribute data between actorswho are in geographically diverse areas. Nowadays, information is sent less frequently throughtraditional correspondence in favor of faster electronic equivalents via the internet.Despite effective IT environmentand secure encryption techniques choose some actors to sendinformation through physical delivery. This phenomenon occurs in those working withconfidential information as it is handled by a number of rules and safety regulations.Based on a set of rules and requirements, we have looked over the possibility of sending sensitiveinformation electronically over the internet. The aim was to find general guidelines for howcompanies and organizations should manage and send sensitive information over insecurenetworks. This led us to our research question: How can information be exchanged betweenactors in geographically diverse areas be categorized and encrypted so that it can be transportedover the internet without security or integrity deficiencies?To answer the question, there was a case study at a defense company.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Glycogen is the storage form of glucose and is used by the skeletal musculature as energy both for intense and endurance events. The glycogen content in the horse?s middle gluteal muscle is more than 600 mmol/kg dry weight, and almost 400 mmol/kg dry weight in the human?s Vastus lateralis. In some special occasions, for example in competitions with several moments on following days, there is a need of a fast muscle glycogen resynthesis. The feed intake is of importance for the velocity of the resynthesis.

Purpose: My purpose of this study was to examine the factors that motivate Swedes to travel to Egypt and Thailand. To answer the question, I have used two questions.What are the factors that motivate Swedes to travel to Egypt and Thailand?What is the motive for Swedes choose to travel to destinations such as Egypt and Thailand?Method: The method I am using  is the qualitative method. The qualitative method has been processed through interviews of Swedish travelers, the Swedish travel agencies as well as Egypt and Thailand tourist agencies specializing in trips to Egypt and Thailand via phone and e-mail.Theory: The theory I am using are motivators and push-pull factors in achieving an understanding of the factors that influence choice for Swedes to travel to destinations such as Egypt and Thailand.Empiricism: The goal was to get a much more qualitative data from the response from the Swedish travel agencies, Egypt and Thailand tourist agency and Swedish travelers who have traveled to both of these destinations.Result: What I have come up with in my study is that the factors that motivate Swedish travelers to travel to Egypt and Thailand, is the warm climate, sun and sea, culture, variety, the cheap price situation and that there are activities for different age groups. This has led to the heat in both Egypt and Thailand has attracted Swedish travelers to travel to both destinations.

A change towards using more biofuels than fossil fuels is taking place in Sweden, and in many other parts of the world. This makes the use of fuel pellets increasingly popular, causing a greater demand for sawmill sawdust products. There is a trend towards the use of multiple types of shredders, instead of a single type in each sawmill. The purpose of the study was to characterize the different flows of saw particles that can be found at Sävar såg when cutting thick or thin wood with different cutting techniques. The saw particles size, shape, moisture content and heat value were analysed by the cutting stations: first cutting fast and slow, second cutting fast and slow, grading fast and slow and planning.

Biogas is a renewable fuel that can be extracted from anaerobic digestion of many differentsubstrates, for example biological household waste. An alternative handling of the waste is tomix it with other wastes and incinerate it in a combined heat and power (CHP) plant. Thisstudy uses life cycle assessment to investigate which type of waste handling that is betterfrom an environmental point of view, anaerobic digestion with biogas production orincineration. The results are based on a case study of a biogas production plant owned by thecompany Ragn-Sells in Vänersborg. The alternative is incineration at a CHP plant inGothenburg.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

In order to avoid harmful substances ending up at the municipal sewage treatment plants, it is important to purify the wastewater at the source. One such source is the wheel washers available in many tire garages which are used to wash the wheels on our vehicles when we change between summer and winter tires. It is important to wash the wheels before storage, to extend the tires lifetime. The purpose of this study is to find a green innovative solution for reduction of emissions of heavy metals at the source, so that the sludge from the sewage treatment plants can be used as fertilizer. The target is to find a wheel wash method which leads to compliance with the guidelines for car washers, and that also provides a better washing result than with the existing method.