The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

In recent centuries the Swedish Tiled Stove has varied in its design with an aesthetic evolutionary history that has not only followed the architectural and artistic ideals but also the taste in stove design. The heat source has varied depending on the regional traditions and where it was located within the country, but the inside of the construction was of a similar five channel system. The purpose of this paper is to study and compare the design of tile matrices made by Emil Petterson with other Swedish stoves. The following questions will be addressed:What characterized the production of a small scale tile stove workroom during the years 1900-50? Which main styles can be described as Emil Pettersson?s ideal while producing his matrices? And finally, is it possible to study the tile stove matrices as objects of historical and cultural significance, and what difficult methodological issues might occur in the doing of it? To answer these questions I will present the results of the documentation of Pettersson?s tile matrices with detailed historical categorizations and schedules. The conclusion shows that Pettersson as a stove builder and -producer was characterized by eclectic ideals and a design shape based on more liberal interpretations of contemporary trends.

The aim of this study is to describe and analyze the history and the current situation of the Church of Sweden. The renovation of Skalljö church in Lerum municipality has been used as an example to enlighten the common changes in the church buildings. The long history of the Church of Sweden as the state church has resulted in the fact that it carries a remarkable part of the Swedish cultural heritage. The reason why the Heritage Conservation Act (1988:950) was altered in January 2000 was due to the change of relations between the State and the Church of Sweden. According to the Act, all church sites owned or managed by the Church of Sweden shall be maintained in such a way that their cultural historic value is not diminished and their appearance and character are not violated.Sweden is today considered to be a secularised country where religion is an individuals? private matter.

One of the most serious and economically important defects caused by clostridia in milk products is the late blowing of semi-hard cheeses.Clostridia occur naturally in soil and can contaminate milk through crops contaminated by dung and soil followed by a less successful silage process, that give them opportunity to grow unaerobically. When anaerobic conditions occur, such as storage of semi-hard cheese, they ferment lactic acid to butyric acid and the gases CO2 and H2.At the fusion of Arla and MD Foods, a series of changes were conducted on the MPN method for lactic acid fermentation for clostridia in milk. These changes resulted in an increased accuracy due to an increased number of test tubes and the change of media from MRCM to BBB, Bryant & Burkey Broth, that was thought to be more selective for Cl. tyrobutyricum, the organism mostly found in hard cheese. When the number of dairy farmers that were given quality reduction fines increased, the new method was suspected and a validation was conducted.The validation included inoculation of different clostridia and bacillus strains into BBB substrate and enzymatic testing of positive samples with Rapid ID 32A.

The objective of this report is to present a review of the studies which has been carried out up to days date concerning how temperature affects vegetables physiologically when it comes to their health inducing as well as quality reducing features. The essay therefore starts off with defining what is meant by the terms health promoting and quality reducing features. It then moves on to describe how different subspecies of Brassica oleracea, that is to say vegetables such as broccoli, cauliflower, Brussels sprouts and kale, is affected by temperature. B. oleracea was chosen because the species contains several commercially interesting subspecies and therefore provides a broad field even though only one species is assessed.

To plan and build a garden in Dubai has other conditions and challenges than what you experience in Sweden. The heat, wind and lack of water makes the need for durable plants, a good design and landscaping important if you want to have the opportunity to use your garden during most of the year. The soil is poor of nutrients, alkaline and sometimes saline, witch makes supplying the soil with organic material and various fertilizers necessary if you want to be able to plant a bigger range of plant material in your garden. Another important part is to provide your garden with a good irrigation system that should be put into the ground before planting so that the plants are given a more even irrigation. It?s relatively green scenery you meet and to me it?s in a way surprising since the country with its climate is rather harsh for the purpose of supporting plant life.

This bachelor?s thesis is a study that examines cactus groups in Sweden from a heritage conservation perspective. Through interviews and an analysis of both historical and modern literature, the research explores why cactus groups became popular and what is required to preserve those still in existence today. A recurring challenge has been the lack of comprehensive source material, leaving some questions open for further research. The study focuses on four cities?Norrk?ping, Skellefte?, Varberg, and V?xj??that have maintained their cactus groups for nearly a century.

In Uppsala, Sweden, Vattenfall has a combined heat and power plant. On the premises there is an engineering workshop with old fluorescent and mercury lamps that need to be replaced. This provides a great opportunity to save energy and money by installing more efficient lighting. The main purpose of this study was to present two functional and energy efficient lighting systems including control system. The lighting systems were designed by investigating the working environment, measuring illuminance and by simulations in the software DIALux.

Akademiska hus is a real estate company that specializes in providing Swedish universities with housing facilities for educational and research purposes. The company strives to reduce its use of energy by 40% between the years 2000 and 2025. The aim of this thesis is to determine which measures can be taken to reduce the need of purchased energy in a building that is used by theSwedishUniversityof Agricultural Sciences inUppsala.In order to determine the results of various changes to the building envelope and ventilation system, the building was modelled in the computer simulation program VIP-Energy. Other proposed changes to make the use of energy more efficient concerned water use and lighting. The need of purchased energy can also be reduced by producing electricity or heat on site, using solar energy.Results show that economically viable measures include upgrading windows and faucets, adjusting control systems for ventilation and lighting, and installing roof mounted solar panels for power production.

This report is a documentation of a Master?s thesis of 20 credits performed at the educational program of Technical Product- and Production Development with Design at Halmstad University. The project is carried out in cooperation with Hafa AB in Halmstad.The purpose of this project was to bring forth a concept of a bathroom cabinet for Hafa?s new selection Young through creative design methods. The selection is supposed to attract the younger purchaser but also a target group that dare to experiment with home furnishing and appreciates new design.

This thesis is a study of humidity at Knauf Danogips external plasterboard. The study is performed at the building project Kv. Maskinen in Jönköping in cooperation with NCC Construction AB and Knauf Danogips. The measuring was performed during five winter/spring months to see how the weather influenced the plasterboard.The measuring was performed at a small two-storied building and a larger fourstoried building. From the buildings` placement were a couple of measuring dots selected and to get a good result was the dots located in the four cardinal points.

AbstractAn approaching overproduction of cereals and a future uncertain supply of non genetic modified vegetable protein feedstuffs have increased the interest in an expansion of the domestic production of protein feedstuffs in Norway. Besides rapeseed (Brassica campestris), peas (Pisum sativum) may be the most suitable crop for this purpose. Peas are characterized by having a relatively high content of crude protein, ranging between 20-26%, a high content of starch, 42-51%, and a low content of fat. In general, the energy value for peas is higher than for barley but lower than for rapeseed and soybean meal.Pea protein consists of albumins and globulins to 85-100%, which leads to the fact that a large part of the pea protein is soluble and degradable in the rumen. Starch in peas is on the other hand to a large extent resistant to rumen degradation compared to starch from other starch rich feedstuffs.

Mechanical ventilation is the most common type ofventilation in newly constructed office buildings. Therehas been an interest to utilize natural ventilationinstead of mechanical ventilation among architects andHVAC consultants in recent years. This is due to thesize of mechanical ventilation systems, which arespace consuming. The mechanical ventilation system isalso complex and requires maintenance. Furthermore,the fan uses a considerable amount of energy.

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.