This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

Smoking is a health problem with a negative impact on virtually all body organs. Smoking can cause, for example, lung cancer, cancers in other organs and cardiovascular disease. There is also a social aspect of smoking. If individuals have many smokers in their environment, the risk to start smoking is increased, and for those who already smoke the chance of quitting will be less. Many municipalities today face smoke-free working to reduce smoking and passive smoking adverse effects.

This thesis was conducted at Linköping University and Saab Aerostructures DPS, Linköping, and focuses on the possibilities of flexible fixturing in machining applications. The thesis is part of the research project "Koofix", which is collaboration between Linköping University and a number of companies.The thesis is aimed towards small batch production which, for Saab Aerostructures DPS, means diverse part geometry and that parts are manufactured in very small numbers, sometimes just one piece. The result of this is that expensive dedicated fixtures are made for most parts. By introducing more flexible fixturing methods to this kind of production the cost of fixtures and tooling will be reduced, and make the production more efficient.New flexible fixturing methods has been presented and evaluated through the thesis, which has resulted in three different concepts. These concepts have been the result of literature screening and study of current manufacturing process at Saab Aerostructures DPS.

Mechanical scaling is one of the most complex operations of all in the mining process. The operators are using both hearing, sight and feel to read the rock and to know where to scale and where to leave. They say they go on gut feeling in great extent, something that comes with experience. The scaling machine is placed into the edge of unsecured and newly blasted rock to hammer off the blocks that has become loose after the blast, but not enough to fall down. It goes without sayingthat it is a risky job.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

Chronic obstructive pulmonary disease can limit patients physical abilities and contribute to social isolation. The purpose of this literature study is to investigate men's and women's experiences of living with chronic obstructive pulmonary dis-ease, and the supporting and guiding role of the nurse to an increased quality of life. 13 critical reviewed articles were used to find the answers to our questions. Quality rating forms were used in order to guarantee a good scientific quality. The results show that, it is of great importance for the COPD-patients well-being to experience social support from those around them, and to have a close relation-ship with their families and friends, in order to experience quality of life.

Bakgrund: Lungcancer är den femte vanligaste cancerformen och den cancerrelaterade dödsorsaken i Sverige. De flesta patienter som insjuknar i lungcancer är runt 70 år, knappt ett hundratal personer varje år insjuknar före 50-årsåldern. Syftet: Att beskriva faktorer som påverkar hur patienter med lungcancer upplever sin smärta och mötet med sjuksköterskan. Metod: En systematisk litteraturstudie genomfördes där både kvalitativa och kvantitativa artiklar granskades. Resultat: I resultatet visade att smärtupplevelsen och mötet med sjuksköterskan är individuell och beror på många olika faktorer.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

Measurement of plasma concentrations of natriuretic peptides have been suggested to be of diagnostic and prognostic value in canine cardiac disease. In several previous canine studies, however, a considerable overlap between investigated groups has been identified. A reliable natriuretic peptide test for use in clinical practice requires establishment of reference values for natriuretic peptides in healthy dogs and cut-off values for subclinical disease as well as for clinical signs of congestive heart failure. Numerous physiological, pathological and pharmacological factors, aside heart function, may influence concentration of natriuretic peptides. A potential effect of dog breed on natriuretic peptide concentration has been suggested but has, to our knowledge, not previously been specifically studied.

?A culture center should be visually welcoming as well as attract a diverse range of visitors with different backgrounds.? This was the client?s request for a new cultural center in Nairobi. The location is in the heart of Nairobi?s industrial area, near several existing buildings that are already in use by the culture organization known as Go Down. I have chosen to keep most of the existing buildings and to use my new building as a complement for the desired program.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

The study was conducted in Jönköping County Chamber of fibrillation and is about change and improvement of process modeling technology. The process for treating patients with fibrillation is in the need to evolve and improve. In order to develop the care they needed a current state description which usually is made with the traditional process modeling tool.Many scientists and health professionals is in the opinion that this technology gives a too rigid image to describe the care processes. It also does not sufficiently take into account the human aspects. This reasoning suggests that the process modeling technology in healthcare is in the need to develop multiple perspectives.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.

Thoroughbred racehorses have suffered from exercise-induced haemorrhage for over 300 years. Almost all competing horses develop exercise-induced pulmonary haemorrhage (EIPH) at some point but most horses don?t suffer from reduced competing capacity due to the disease. The cause of the exercise-induced haemorrhage is unknown. The most believed theory today is that EIPH is induced by pulmonary stress failure caused by pressure over 100 mmHg in the pulmonary arteries during exercise.