This work reveals the results of BAL performed on horses included in a larger study that assessed the relationship of amount and type of inhaled particles in equine stable air on indices of respiratory inflammation in horses and people. During this study an unanticipated and marked elevation in lung eosinophils was detected in a number of the horses. The possible significance and cause of this pulmonary eosinophilia was investigated further, and is the main focus of the work presented.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

Netadmin Systems är ett Linköpingsbaserat IT-företag där huvudprodukten NETadmin är ett Operation support system/Business support system (OSS/BSS) som i huvudsak används i öppna nät för bl.a. kund- och lagerhantering, provisionering, övervakning och ärendehantering. Ett växande behov finns att göra det möjligt att använda övervakningssystemet via mobila enheter för att kunna felsöka och hantera driftstörningar effektivt.Syftet med rapporten är att undersöka hur övervakningssystemet kan göras tillgängligt på Android samt att ta fram en prototypapplikation för hantering av grundläggande övervakning. Genom fallstudien som har genomförts har slutsatsen dragits att Netadmin API är lämpligt för kommunikation via mobila enheter men att API behöver vidareutvecklas med ytterligarefunktioner. De viktigaste av dessa har implementerats och arbetet har även mynnat ut i en applikationsprototyp för Android.Genom utvecklingen av denna applikation ges Netadmins kunder möjlighet att hantera övervakningssystemet via mobila enheter..

Background Atelectasis is a commun respiratory complication related to general anesthesia and may contribute to pneumonia and acute respiratory failure. Atelectasis apear within 10 minutes after anesthetization and occur in 90% or more anesthezied patients regardless of age and gender. The aim of this study was to indentify if there are any evidence for which methods are ultimate or are most efficacious to reduce and prevent the formation of atelectasis.                                                                                                          Methods This study is a descriptive litterature study where 28 scientific studies have been indentified for review and analysis.                                                                                                               ResultsThe use of 100% oxygen during the induction of anesthesia favors the developement of atelectasis. This can be prevented by preoxygenation with oxygen content of 100% combined with a PEEP of 6-10 cmH2O. When free airway is secured, oxygenation with 100% was found to be unnecessary.

De flesta hjärtstopp sker prehospitalt, dessa patienter är i behov av livräddande behandling i form av Hjärt-Lung-Räddning (HLR) samtidigt som de snabbt skall förflyttas och behandlas i ambulans till sjukhus för vidare vård och behandling. Manuell HLR är svårt att utföra på ett effektivt och säkert sätt när patienten samtidigt ska förflyttas och det är också tröttande för ambulansteamet att utföra hjärtkompressioner under en längre tid. LUCAS är en HLR-apparat som ger mekaniska hjärtkompressioner. Apparaten har använts prehospitalt i cirka fyra år. Syftet med föreliggande arbete var att undersöka om LUCAS förbättrar det prehospitala omhändertagandet av patienter med hjärtstopp.

The saw blade producer, Håkansson Sågblad AB, patented in the U.S. a new blade profiledesigned specially to cut fish and meat. The most important advantage of that blade is that its teethare not set, therefore the material lost when cutting is really smaller. The special geometry of thatprofile made that nobody had found a proper way to produce it before.The goal of the outlined work is to develop a machine to produce these new blades in afeasible way.The research approach of the project can roughly be divided into three phases:1.- Invention and development of a proper distribution of blades to produce a big amount ofthem at the same time.2.- Research of the best production process to produce the blades.3.- Main design of the machine to produce the blades.In the Thesis these three points are carefully developed and studied in the form of the startpoint of a really bigger project. Some tests had been done in order to prove all the analytical ideasand the results obtained had been satisfactory enough to give Håkansson the start point of a bigbusiness.

In the current situation is the straight tube cutter, that provides Luvata?s line of large recoolers with copper tubes, manually operated. To prevent damages and facilitate mounting the tubes must be properly arranged when they leave the machine. This report aims to investigate and present an automated solution where the operator does not need to participate in the process. A number of theories have been drawn up and tests have been done.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

At the Division of Electricity at Uppsala University there is an experimental rig forhydroelectric generators. The experimental rig?s vital part is a 12-pole synchronousmachine, whose electrical characterizing parameters (resistances, inductances andtime constants) are unknown. The aim of this thesis is to characterize the machine inits current state by perform a Standstill Frequency Response (SSFR) test. From theanalysis of the measurement data, which is a part of the test, a set of basic parametershave been received.

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

Slaughter of animals should consist of two steps in order to be considered humane. The first step of the slaughter process is stunning, with the purpose of inducing unconsciousness and insensibility in the animal. The second step is exsanguination, which causes bleeding and eventually death. What death really means in these situations has been discussed intensively, but still no agreed definition has been accepted. Nonetheless, it is conceded that animals are declared dead when consciousness is irreversibly lost, and absence of respiration and blood circulation are observed.

There is a new beverage container on the market, a bottle made out of pure aluminum as a replacement for the traditional container made out of glass. This new container has the potential to reduce both cost and pollution during transportation, the lighter and stronger construction has every advantage compared to the old one in glass. The new container has every possibility to make it on the market. Some of the biggest brands within the soft drink market already use these bottles in countries without any recycling demands like: Coca-Cola, Heineken and Pepsi. The only thing stopping these brands from the Swedish market is the lack of a functional return system, there is only one company that uses the bottle in Sweden today and they take care of their own used bottles.

Sammanfattning Titel: Investeringsbenägenheten för M2M lösningar i drivmedelsbranschen Författare: Johan Apell och Tom Ohlsson, Blekinge Tekniska Högskola Nivå: Kandidat uppsats Handledare: Anders Hederstierna Nyckelord: Maskin till maskin, Machine to machine, Maskinkommunikation, M2M, Mobilitet, Investeringsbenägenhet, Investeringsbedömning, Standard, Beslut och Beslutsfattande Beskrivning av situationen Idag går endast ett fåtal av de aktiva företagen på M2M marknaden med vinst, och ett antal har gått i konkurs under det senaste året. M2M branschen tycks ha bristande kunskap om potentiella kundsegment och därmed har man svårt att identifiera sina kunders verkliga behov. Drivmedelsbranschen har börjat titta på M2M lösningar och inlett en rad pilotprojekt inom området. Få aktörer har dock fattat beslut om genomgripande satsningar på M2M lösningar. Hur ser drivmedelsbranschen på M2M lösningar och vilka hinder kan identifieras för detta synsätt? Syfte Att öka förståelsen mellan användare och leverantörer på en ännu omogen M2M marknad, genom att studera en specifik bransch.

Sammanfattning Titel: Investeringsbenägenheten för M2M lösningar i drivmedelsbranschen Författare: Johan Apell och Tom Ohlsson, Blekinge Tekniska Högskola Nivå: Kandidat uppsats Handledare: Anders Hederstierna Nyckelord: Maskin till maskin, Machine to machine, Maskinkommunikation, M2M, Mobilitet, Investeringsbenägenhet, Investeringsbedömning, Standard, Beslut och Beslutsfattande Beskrivning av situationen Idag går endast ett fåtal av de aktiva företagen på M2M marknaden med vinst, och ett antal har gått i konkurs under det senaste året. M2M branschen tycks ha bristande kunskap om potentiella kundsegment och därmed har man svårt att identifiera sina kunders verkliga behov. Drivmedelsbranschen har börjat titta på M2M lösningar och inlett en rad pilotprojekt inom området. Få aktörer har dock fattat beslut om genomgripande satsningar på M2M lösningar. Hur ser drivmedelsbranschen på M2M lösningar och vilka hinder kan identifieras för detta synsätt? Syfte Att öka förståelsen mellan användare och leverantörer på en ännu omogen M2M marknad, genom att studera en specifik bransch.