Couch grass (Elymus repens (L.) Gould) is a severe weed in Sweden, and since both the use of herbicides and cultivation should be decreased, it will become increasingly problematic to control couch. The present work is meant to, by literature studies and an experiment, give some answers to the question if cutting and competition can depress the growth of couch. The experiment was carried out in the growing season 2001 at Ultuna, Uppsala, in plastic boxes. The design was three-factorial randomised complete blocks. The factors were plant combination, nitrogen level and cutting strategy.

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionTitle: Can nutritional support contribute to the healing of pressure ulcers in elderly patients?Author: Anton Kinnander, Sandra SmidelikSupervisor: Elisabet RothenbergExaminer: Anna WinkvistProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: 12-04-11Background The number of elderly patients with co-morbidity is increasing in the western world. It is therefore reasonable to predict increasing incidence and prevalence of pressure ulcers. One study, published 2009, found that as many as 59 % of geriatric patients within the Swedish health care system had developed pressure ulcers. Symptoms vary from mild erythema to severe deep tissue damage and development of pressure varies from hours to weeks.

With numerous applications in both military and civilian life, the demand for accurate 3D models of real world environments increases rapidly. Using an airborne laser scanner for the raw data acquisition and robust methods for data processing, the researchers at the Swedish Defence Research Agency (FOI) in Linköping hope to fully automate the modeling process.The work of this thesis has mainly been focused on three areas: ground estimation, image segmentation and classification. Procedures have in each of these areas been developed, leading to a new algorithm for ground estimation, a number of segmentation methods as well as a full comparison of various decision values for an object based classification. The ground estimation algorithm developed has yielded good results compared to the method based on active contours previously elaborated at FOI. The computational effort needed by the new method has been greatly reduced compared to the former, as performance, particularly in urban areas, has been improved.

People live longer. There is a growing need to increase the knowledge of aging and of the need among the elderly for medical care in the near future. As a step towards meeting this need, a survey among the elderly in Skåne is made by the division of Geriatric Medicine in Malmö University Hospital. This survey is called Gott åldrande i Skåne, GÅS. A frequent decease among the elderly is Mild Cognitive Impairment (MCI).

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

This work is a GIS study of fishing rights distribution between different categories of ownersand properties in the Stockholm Archipelago. The purpose was to create basic data used toestablish fishing laws and restrictions within the Stockholm County.Stockholm?s archipelago consists of a unique environment and is the natural life andreproduction environment for ? of Sweden?s reproducing fish species. The increasingpressure from fishing, tourism and weekend population increases the need for an efficientfishing administration to prevent impoverishment and to ensure the biological diversity inSwedish fishing waters. There is an increasing need to review fishing administrationmethodologies, as well as studying the categories of ownership and properties located insensitive areas and areas influenced by physical disturbances in order to establish effectivelaws and restrictions.The Swedish fishing rights for an area are currently not connected to the ownership of theproperty to which it belongs.

In a press release from the Swedish church it says that the pressure from people who are in need is increasing on the deacons in Sweden and that it?s getting higher each year. This study contains the search of knowledge about the deacons of the Swedish church, if they actually feel an increasing pressure and in what way, how they are handling the possible pressure from people in need, if that pressure is too high and if the deacons feel that they can assist the people seeking their help. The study also aim to provide more knowledge about the deacons experiences of the opportunities and boundaries (or obstacles) they meet in their line of work and how they handle the boundaries when/if they can?t provide the help that the people need.

Mechanical scaling is one of the most complex operations of all in the mining process. The operators are using both hearing, sight and feel to read the rock and to know where to scale and where to leave. They say they go on gut feeling in great extent, something that comes with experience. The scaling machine is placed into the edge of unsecured and newly blasted rock to hammer off the blocks that has become loose after the blast, but not enough to fall down. It goes without sayingthat it is a risky job.

Aspen (Populus tremula L.) and goat willow (Salix caprea L.) are two important tree species in the aspect of nature conservation. Due to the elimination of forest fires, a former negative attitude towards deciduous trees in forestry and a strong herbivore pressure, these tree species have been negatively affected during the last fifty years. The aim of this study was to investigate whether the occurrence of aspen and goat willow could be related to either human impact or to site properties, such as ground moisture and vegetation type. A side study included an inventory of a number of cyanobacterial tree lichens on aspen and goat willow in order to try to relate the occurrence of these lichens species to stand history and stand properties. The study was performed in Hamra State Forest in northern Dalarna. Nature reserves were compared with stands in managed areas.

In a press release from the Swedish church it says that the pressure from people who are in need is increasing on the deacons in Sweden and that it?s getting higher each year. This study contains the search of knowledge about the deacons of the Swedish church, if they actually feel an increasing pressure and in what way, how they are handling the possible pressure from people in need, if that pressure is too high and if the deacons feel that they can assist the people seeking their help. The study also aim to provide more knowledge about the deacons experiences of the opportunities and boundaries (or obstacles) they meet in their line of work and how they handle the boundaries when/if they can?t provide the help that the people need.

The task of this project was to build an computer processing system for pressureregulation, in which the pressure loss over the open hydrolicvalve should be kept as low as possible. By using an cross connected proportional directional valve the valve problem could be solved. The control- and regulationproblem for the pressureregulation system was solved by using the DAQ- card NI6035E from National Instruments and the computerprogram Automatic Pressure Control 1.0 which has been software developed and written in Visual Basic. The final result showed that correct processvarible was obtained in 0,5 seconds, when the setpoint was changed in the testarea 0 - 2,5 MPa..

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

Heavy duty vehicles often have problems with traction during the winter periods. For vehicles that can lift tag axles it is possible to increase the normal force on the driven axle by lifting one or more tag axles, this will then increase the propulsive force of friction. This however increases wear on both road and vehicle. A possibility to reduce the wear while achieving nearly equivalent traction compared to lifted tag axles is to allow the vehicle to regulate the normal force by lowering the pressure in the air suspension associated with the tag axles or by the lifting of these axles. The vehicle would then by itself be able to set just the right amount of normal force on the drive wheels to avoid unnecessarily high normal forces while maintaining sufficient traction.The purpose of the report is to find out which parameters affect heavy duty vehicles when driving on slippery slopes and how traction can be improved.

The purpose of this study is to investigate if there is enough consideration taken to sensitive forest areas close to water or wetlands during clear cutting assignments, and to estimate the extent of damage made by forestry machines used at that time. A field and literature study is used to show how to improve and prevent the damage made in the wake of the machines. This study is made for Sydved, and shall culminate in a policy to prevent ground damage during their clear cutting assignments. The areas which were part of the field studies were clearcuttings on fine grained soil close to water and wetlands. The purpose was to find out if the water had been affected, what had been done to prevent ground damages and what more could have been done. The results of the field studies show that more work needs to be done to reach up to expectations. More information about the assignment area, better planning of sensitive regions, and strengthening of the main haul roads with brush are some of the improvements that can be done. There is also a need for more exact guidelines, follow-ups and education for everyone involved to have the same goals and understanding to prevent ground damage..

This thesis work has been performed at the department of diagnosis and dependability at Volvo Car Company, Torslanda. The background of this project is based on interest in ascertaining how different factors possibly can affect a diagnosis method, which has been developed to find leaks in the fuel tank and evaporation system. According to the OBD II requirements leaks with an orifice diameter larger or equal to 0,5 mm, must be detected. The idea of the diagnosis method is to create an over pressure in the system with an air-pump. The current through the pump is measured and correlates to the power consumed by the pump.