A new FPGA suitable for space applications has just reached the market. To investigate whether there are any possible flaws or limitations similar to those previously seen on FPGAs, an evaluation has to be done. This master thesis contains the evaluation of this new radhard FPGA with focus on possible design limitations and package related electrical phenomena.Areas evaluated: Ground-/VDD bounce, Cross talk, Rise time sensitivit, Power cycling, Power consumption, Place and route tool, Radiation hardnessThis report contains all steps in the evaluation. From method to measurements, comparisons, theory, results and conclusions. In the evaluation work, special effort has been made to develop designs that really stress the FPGA to find potential problems.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

The United States use of Unmanned Combat Aerial Vehicles (UCAV) or drones for targeted killings of terrorists has been on the rise in recent years and the method has become the core element of president Obamas strategy in the war against terror. This study examines the deterrent effect of targeted killings on terrorism using UCAV/drones as a method of counterterrorism. Building on the literature on counterterrorism, UCAV, targeted killings, deterrence theory and statistics on terrorism the study provides a case study of the CIA drone operations in Pakistan between the years 2004-2010. The goal has been to analyze drone operations and the extent of terrorism from the beginning of the drone campaign until 2010. This as a means of identifying possible trends in terrorism activity due to the occurrence of drone strikes.

The purpose of this essay is to look at the Swedbank Stadion, which is a modern stadium in the south of Sweden. Swedbank Stadion is the home ground of Malmö FF, one of the largest football team in Sweden, and the goal is to create value for the team. The stadium owners have to get companies to hire premises inside of the stadium so they can pay for the home ground of Malmö FF. Therefore we have focused on the servicescape in the stadium and how it can create value for the companies that act on Swedbank Stadion on a daily basis.This study of the Swedbank Stadion is based on a qualitative approach. The qualitative approach is chosen because we wanted to establish deeper understanding for the case itself.

There is consensus in research, policy, business and many other areas around the benefits of creativity. Previous research shows that creativity is only spurred under certain conditions. Usually creativity is not associated with concepts such as control, deadline or cost effectiveness. Companies, by contrast, have the need for control and management of their operations, which implies that the two processes can be difficult to reconcile. A company that wants a high creativity while maintaining control and management is forced into a series of organizational compromises.

In an attempt to prevent ground damage and to reduce harvesting costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material. If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.

The predominant forestry harvesting method is based on the harvester-forwarder method, theharvester folds, branches and cuts trees, and sorts the logs into piles, while a forwarder transportsthe logs to a landing area.This master thesis work is about realization of a dynamic forwarder simulation model, and itspurpose is to provide an integrated forwarder simulation model in MATLAB/SimMechanicswhere the forwarder is based on a concept using pendulum arms to connect wheels and chassis.Active suspension control is developed and implemented into the simulation model, and finallycompared in simulation with passive suspension.In a first step, an integrated forwarder simulation model is developed, containing a simplifiedforwarder model, a tire-to-ground interaction model and a test track model. The simplifiedforwarder model is based a rigid multi-body system with a spring-damper suspension of thependulum arms. The tire-to-ground interaction model calculates the reaction forces, friction fromthe ground and applies the propulsion force. The test track model is a simplified version of thereal test track in Skogforsk. The propulsion wheel torque control is used to regulate theforwarder speed.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

 Date: 2008-10-06Level: Bachelor thesis within Information Technology and business economics, 15p, EIK021Authors: Anna Karlsson, akn05009@student.mdh.seLena-Maria Lindström, llm05002@student.mdh.seMagnus Wretlund, mvd05001@student.seTutor: Marie Mörndal Title: Managing IT-incidents, a case study at ICAs IT department                            OperationsKeywords: IT-incident management, IT-incident management process, IT-incident, ITIL, CCTA Problem: An organization can benefit by having an established management process of handling IT-incidents. But how can this be achieved? Are there step-by-step procedures? What´s included in the management process of IT-incidents? Is the size of the organization relevant to which model is to be chosen? Can the work of the writers of this essay result in a recommendation of a specific model for IT-incident management? These questions lead to the following essay question; How are IT-incidents managed?Purpose: The purpose of this thesis is to describe and discuss how IT incidents can be managed.Method: The writers of this essay have performed a case study at ICA, a Swedish food retail company. Eleven interviews with nine different persons have been carried out. The interviews are analyzed in the chapter called Resultat och analys.Conclusion: Our conclusion is that there are both similarities and differences in Dept.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

This study aims to examine how performance management is compatible with the operations at Sida, Sweden?s International Development Cooperation Agency, by performing interviews with representatives from Sida. The public sector is facing increased demands on accounting, which has emerged as an institutionalized social norm in society. The nature of Sida?s operations, however, proves to be highly complex, rendering results based management difficult to implement.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

Title: Locally Integrated Groups ? A special education alternative Author: Jennie Arvidsson Type of essay: Exam essay, second level (15 credits) Supervisor: Barbro Bruce, Examiner: Lisbeth Ohlsson Program: Special Education Program at Malmö Högskola, Sweden Date: 2012-01-12 Present study is an attempt to describe how staff perceive their working operations in seven locally integrated groups, for pupils in special educational needs. By submitting a questionnaire to all professions within the groups I have tried to find similarities and differences in their statements from both structured and unstructured questions. The study is an attempt to contribute knowledge about how these groups can be understood and developed, based on a special education perspective, systems theory and sense of coherence (KASAM). The results shows that there is a consensus among the majority of staff opinions of the systems? opportunities as well as dilemmas.

This thesis describes the developmentof a device called "Oil Separator"which is used for washing vehicles andparticularly car washing. The devicedeveloped for Mr. Car Bilvård AB inUppsala, the company's work involvespassenger transport and courierservices. The company needs anexternal device that meets theenvironmental standards to wash theirown cars in the premises without theneed to modify or reconstruct on thepremises ground as the premises is ona leased contract.Work began with a preliminary study onthe literatures that describes boththe function and structure ofdesigning the device. A few interviewswith other car wash companies had beenimplemented, and some measurements.After collection of the necessaryinformation the specifications ofcustomer requirement was presented .With these requirements a fewconcepts was generated and weighedusing the Pugh matrix for conceptsselection for further development.The final concept was furtherdeveloped and a design has beenpresented.

During 2004 to 2008, The United States Marine Corps (USMC) executed counterinsurgency operations in Anbar Province with the purpose to stabilize one of the most violent areas in Iraq. The Marine Corps successfully managed to suppress the insurgency as violence dropped dramatically in late 2007. What did the marines do in order to suppress the insurgency? Why did violence drop in the province? The Marine Corps approach and procedures have been examined earlier through theories of organizational learning and adaptation. However, there is an absence of studies aiming to analyse the Marine Corps? counterinsurgency approach through the analytical lens of counterinsurgency theory.