The purpose of this article is partly to find out how the burial grounds are used today and the needs of its visitors, but also to develop the character and expression of future burial grounds. My suggestions focus on burial grounds without religious attributes; something that, according to the burial law (Begravningslagen, 1990:1144), the manager of the burial ground is ordered to obey. In my design I aim to fulfill any requests regarding the place of burial that have been raised during my study. I have chosen the history of burial grounds as my starting point and will subsequently discuss their significance in today's society. I describe what distinguishes the burial ground throughout history from medieval times and onwards. Tradition and religion are closely linked regarding burial rituals.

AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

NATO, USA, Storbritannien och Ryssland m.fl. använder sig av stridsuppgiften räd för markstridskrafter och erfarenheter från bl.a. Irakkriget 2003 visar att de kan få stor betydelse. Räder anses överensstämma med manöverteorin, men räder återfinns inte som stridsuppgift för svenska markstridskrafter.Denna uppsats analyserar stridsuppgiften räd för markstridskrafter, operationaliserar två indikatorer för räder och med hjälp av dessa undersöks hur räder är förenligt med FM nuvarande doktrin och Reglemente för Markoperationer (RMO).Undersökningen visar att räder inte är förenliga med nuvarande doktrin och RMO. Bl.a.

The number of people in the world and the urbanization increases. This leads to a bigger need of space for the built environment, space that soon doesn?t exist. A large portion of humanity?s energy disposal is used for heating of buildings.

Real estate is defined as ground, which is divided into property. Ground means every part of the surface, which is situated within the country. There is no legal definition of property to be found. Property is usually explained as every unit, which legally should be registered in the register of landed properties. To constitute a property the property must permanently be suited for its purpose.

Every place is a stage where people interact. The nature of the stage and its scenography to some extent shapes the interaction. Considered as a place, the school ground gives rise to many varying expectations. Lower school pupils often have clear ideas of how they are expected to behave and how they are expected to use the place. But as the pupils age, the purpose of the school ground grows less obvious.

In the process of globalization, identity has become one of the central factors.An understanding of the difference that makes up our society has made thequestion of weather is it possible to envision a society where difference is thecommon ground, one that has been up for contest. To answer this we need to seeif this kind of democracy is possible at all. For this I?m turning to the socialmovments who while they are working close to the reality also can give us somereal answers. Therefore I have looked at how social movements adress identity,difference and conflict and concluded that three things are crucial in organizing ongrounds of difference.

This thesis has been performed at Uddeholms AB with the purpose to investigate theparameters affecting the formation of inclusions during the manufacturing of a low carbonmanganese-steel.A follow-up, steel and slag sampling and evaluations in microscope have been done for a totalof five heats.The results for each heat have been evaluated in relation to the theory from the literaturesurvey and suggestions for changes in the process to reduce the amount of inclusions whichhave a negative effect on the steel quality have been given.The project extends over a large process where many parameters affect the formation ofinclusions. However, a tendency that a higher addition of alloys seems to increase the totalamount of inclusions before and after the vacuum degassing is seen.The majority of the studied inclusions seem to approach the composition of the top slag aftervacuum degassing. Ladle glaze may cause the inclusions which had a different compositioncompared to that of the slag.A high or low ladleage together with a high argon flow during vacuum degassing seems todissolve particles from the refractory which later on get trapped inside the inclusions.The floatation for two heats has been studied where a short floatation seems to give a higheramount of inclusions in casted material.In machined material so called stringers were found. The main composition of those stringerswas pure alumina. Inclusions with a composition of pure alumina were not found in the liquidsteel, thus the pure alumina inclusions must be formed during the casting.

The Russian-Georgian war of 2008 drastically changed Europe´s and Sweden´s political climate.Russiashowed that it is capable of successfully completing complex campaigns including ground, naval and air assets. However, not much has been said about the theoretical framework and doctrine of the Russian military of today. Even less has been researched about Russian use of air power and applied air theory. Are air power assets still considered primarily as support of ground offensives or has the theoretical framework changed?John A.

A new FPGA suitable for space applications has just reached the market. To investigate whether there are any possible flaws or limitations similar to those previously seen on FPGAs, an evaluation has to be done. This master thesis contains the evaluation of this new radhard FPGA with focus on possible design limitations and package related electrical phenomena.Areas evaluated: Ground-/VDD bounce, Cross talk, Rise time sensitivit, Power cycling, Power consumption, Place and route tool, Radiation hardnessThis report contains all steps in the evaluation. From method to measurements, comparisons, theory, results and conclusions. In the evaluation work, special effort has been made to develop designs that really stress the FPGA to find potential problems.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

The purpose of this essay is to look at the Swedbank Stadion, which is a modern stadium in the south of Sweden. Swedbank Stadion is the home ground of Malmö FF, one of the largest football team in Sweden, and the goal is to create value for the team. The stadium owners have to get companies to hire premises inside of the stadium so they can pay for the home ground of Malmö FF. Therefore we have focused on the servicescape in the stadium and how it can create value for the companies that act on Swedbank Stadion on a daily basis.This study of the Swedbank Stadion is based on a qualitative approach. The qualitative approach is chosen because we wanted to establish deeper understanding for the case itself.

In an attempt to prevent ground damage and to reduce harvesting costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material. If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.

The predominant forestry harvesting method is based on the harvester-forwarder method, theharvester folds, branches and cuts trees, and sorts the logs into piles, while a forwarder transportsthe logs to a landing area.This master thesis work is about realization of a dynamic forwarder simulation model, and itspurpose is to provide an integrated forwarder simulation model in MATLAB/SimMechanicswhere the forwarder is based on a concept using pendulum arms to connect wheels and chassis.Active suspension control is developed and implemented into the simulation model, and finallycompared in simulation with passive suspension.In a first step, an integrated forwarder simulation model is developed, containing a simplifiedforwarder model, a tire-to-ground interaction model and a test track model. The simplifiedforwarder model is based a rigid multi-body system with a spring-damper suspension of thependulum arms. The tire-to-ground interaction model calculates the reaction forces, friction fromthe ground and applies the propulsion force. The test track model is a simplified version of thereal test track in Skogforsk. The propulsion wheel torque control is used to regulate theforwarder speed.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..