The purpose of this article is partly to find out how the burial grounds are used today and the needs of its visitors, but also to develop the character and expression of future burial grounds. My suggestions focus on burial grounds without religious attributes; something that, according to the burial law (Begravningslagen, 1990:1144), the manager of the burial ground is ordered to obey. In my design I aim to fulfill any requests regarding the place of burial that have been raised during my study. I have chosen the history of burial grounds as my starting point and will subsequently discuss their significance in today's society. I describe what distinguishes the burial ground throughout history from medieval times and onwards. Tradition and religion are closely linked regarding burial rituals.

AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

In modern industrial robots the components in the transmission contain nonlinearities. These nonlinearities need to be to estimated either for better control or to use the parameters for diagnosis of the system. There is a lot of work done within system identification and mainly within the field of iterative parameter estimation.This thesis considers recursive grey-box identification for a nonlinear model of the transmission in an industrial robot. The nonlinearities that are identified are friction, spring stiffnes, hysteresis and backlash. These nonlinearities are a part of the models that are presented in this thesis.

The purpose of this study was to examine interpersonal problems and its relationship to the working alliance in psychotherapy. To examine this, data was used from Umeå and Lund University psychology practice client database, which clients responded to by using the self-assessment scales Inventory of Interpersonal Problems Circumplex Scales and the Working Alliance Inventory. The sample consisted of 201 participants that answered the questionnaires both before and after psychotherapy. A second sample consisted of 93 clients who specifically sought help for interpersonal problems. Results showed that the level of interpersonal problems before and after psychotherapy changes.

NATO, USA, Storbritannien och Ryssland m.fl. använder sig av stridsuppgiften räd för markstridskrafter och erfarenheter från bl.a. Irakkriget 2003 visar att de kan få stor betydelse. Räder anses överensstämma med manöverteorin, men räder återfinns inte som stridsuppgift för svenska markstridskrafter.Denna uppsats analyserar stridsuppgiften räd för markstridskrafter, operationaliserar två indikatorer för räder och med hjälp av dessa undersöks hur räder är förenligt med FM nuvarande doktrin och Reglemente för Markoperationer (RMO).Undersökningen visar att räder inte är förenliga med nuvarande doktrin och RMO. Bl.a.

The number of people in the world and the urbanization increases. This leads to a bigger need of space for the built environment, space that soon doesn?t exist. A large portion of humanity?s energy disposal is used for heating of buildings.

Real estate is defined as ground, which is divided into property. Ground means every part of the surface, which is situated within the country. There is no legal definition of property to be found. Property is usually explained as every unit, which legally should be registered in the register of landed properties. To constitute a property the property must permanently be suited for its purpose.

Every place is a stage where people interact. The nature of the stage and its scenography to some extent shapes the interaction. Considered as a place, the school ground gives rise to many varying expectations. Lower school pupils often have clear ideas of how they are expected to behave and how they are expected to use the place. But as the pupils age, the purpose of the school ground grows less obvious.

Volvo Construction Equipment is one of the worlds largest manufacturer of heavymachinery. In Braås, Sweden, they develop and manufacture articulated haulers inseveral sizes. The biggest, the A40, is capable of loading almost 40 metric tonnes.These haulers have a bogie to distribute the forces of the load evenly onto the two axlesand there wheels. The bogie is constructed using a rigid balance beam on each side ofthe frame connecting the axles or an independent solution using hydropneumatics.An analysis has been made in order to establish the forces created during corneringand through the theory, an estimation of the extensive tyre wear and extra fuelconsumption has been made. All due to the effects of the tyres not being inline with thecornering radius.

In this study the practical work with the EU Water Framework starts on the island of Gotland. 33 lakes and 32 streams have been characterized and classified regarding to their ecological status. The aim with the characterisation is to create a uniform discription of all waterbodies and a comparable estimation for the future. The aim with the classification is both to study the waterbodies ecological status and to gain knowledge of where the resources should be concentrated so that the ecological status in all waterbodies will be good in 2015.The characterisation has been done according to the EU Water Framework Directive, and the factors that have been applied are the mean depth and area of the lake. The length and size on the catchment area are the factors that have been used on streams.

In the process of globalization, identity has become one of the central factors.An understanding of the difference that makes up our society has made thequestion of weather is it possible to envision a society where difference is thecommon ground, one that has been up for contest. To answer this we need to seeif this kind of democracy is possible at all. For this I?m turning to the socialmovments who while they are working close to the reality also can give us somereal answers. Therefore I have looked at how social movements adress identity,difference and conflict and concluded that three things are crucial in organizing ongrounds of difference.

The Russian-Georgian war of 2008 drastically changed Europe´s and Sweden´s political climate.Russiashowed that it is capable of successfully completing complex campaigns including ground, naval and air assets. However, not much has been said about the theoretical framework and doctrine of the Russian military of today. Even less has been researched about Russian use of air power and applied air theory. Are air power assets still considered primarily as support of ground offensives or has the theoretical framework changed?John A.

A new FPGA suitable for space applications has just reached the market. To investigate whether there are any possible flaws or limitations similar to those previously seen on FPGAs, an evaluation has to be done. This master thesis contains the evaluation of this new radhard FPGA with focus on possible design limitations and package related electrical phenomena.Areas evaluated: Ground-/VDD bounce, Cross talk, Rise time sensitivit, Power cycling, Power consumption, Place and route tool, Radiation hardnessThis report contains all steps in the evaluation. From method to measurements, comparisons, theory, results and conclusions. In the evaluation work, special effort has been made to develop designs that really stress the FPGA to find potential problems.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

The aim of this study is to describe a number of type stands of lodge pole pine in Norrbotten with respect on stem volume and total biomass. Further questions to answer is if there is stand characteristics that make the stands more suitable for pulpwood in early thinning, or if it is better to apply whole tree harvest. The study shall also give an indication if bio energy can be an economical interesting alternative for Sveaskog. Sampled trees represented the variation in the different stands. Five trees were selected from each stand to represent that stand. Stem volume and biomass (kg dry weight (DW) per hectare) for each fraction was calculated.