The purpose of this essay is to look at the Swedbank Stadion, which is a modern stadium in the south of Sweden. Swedbank Stadion is the home ground of Malmö FF, one of the largest football team in Sweden, and the goal is to create value for the team. The stadium owners have to get companies to hire premises inside of the stadium so they can pay for the home ground of Malmö FF. Therefore we have focused on the servicescape in the stadium and how it can create value for the companies that act on Swedbank Stadion on a daily basis.This study of the Swedbank Stadion is based on a qualitative approach. The qualitative approach is chosen because we wanted to establish deeper understanding for the case itself.

In an attempt to prevent ground damage and to reduce harvesting costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material. If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.

The predominant forestry harvesting method is based on the harvester-forwarder method, theharvester folds, branches and cuts trees, and sorts the logs into piles, while a forwarder transportsthe logs to a landing area.This master thesis work is about realization of a dynamic forwarder simulation model, and itspurpose is to provide an integrated forwarder simulation model in MATLAB/SimMechanicswhere the forwarder is based on a concept using pendulum arms to connect wheels and chassis.Active suspension control is developed and implemented into the simulation model, and finallycompared in simulation with passive suspension.In a first step, an integrated forwarder simulation model is developed, containing a simplifiedforwarder model, a tire-to-ground interaction model and a test track model. The simplifiedforwarder model is based a rigid multi-body system with a spring-damper suspension of thependulum arms. The tire-to-ground interaction model calculates the reaction forces, friction fromthe ground and applies the propulsion force. The test track model is a simplified version of thereal test track in Skogforsk. The propulsion wheel torque control is used to regulate theforwarder speed.

In the next few years the pollutants loading at the Slottshagen wastewater treatment plant in Norrköping is going to increase due to the reason that one of the waste water treatment plant in the district will be shut down.A survey of how these different pollutants are divided in the treatment process is therefore necessary for mapping out both the loading and treatment efficiency.This can be achieved by studying mass balances.Mass balances were carried out for the water treatment process for the mechanical/chemical,biological and the chemical stage.The mass balance studies show that the treatment efficiency was very good. However in order for the mass balances to be quite consistent and to ensure complete coverage of results and conclusions i.e. more reliable results, sludge samples should be collected and taken at different times per day and the influent rate should be investigated.In this work mass balance has been set up in order to illustrate and identify the factors that should be considered and taken care of for further estimation using mass balances in the future. Furthermore this survey results in a calculating model for the mass balances at thisplant.This calculating model is used as a tool to facilitate future calculations for mass balances for the water treatment process at Slottshagens wastewater treatment plant.Moreover it provides a basis for carrying out further estimation of the treatment process in the near future.In this project the importance of some operating parameters was also taken in consideration.This calculating model can be modified so that calculations of such operating parameters i.e. sludge loading and sludge age can be easily performed.Such information can be used further to evaluate different operation alternative in order to ensure an optimal use of the treatment process with in the plant..

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

Examensarbetet undersöker prestandakostnader och flaskhalsar för spelgrafik samt beskiver vanliga optimerings tekniker som tillämpas i industrin. Rapporten ger sig på uppgiften att visa exempel på prestandakostnad. Det framgår att dagens spelgrafik är för komplex och situationsberoende för att komma med annat än enkla abstraktioner man kan använda sig att göra en estimation på prestanda..

This thesis describes the developmentof a device called "Oil Separator"which is used for washing vehicles andparticularly car washing. The devicedeveloped for Mr. Car Bilvård AB inUppsala, the company's work involvespassenger transport and courierservices. The company needs anexternal device that meets theenvironmental standards to wash theirown cars in the premises without theneed to modify or reconstruct on thepremises ground as the premises is ona leased contract.Work began with a preliminary study onthe literatures that describes boththe function and structure ofdesigning the device. A few interviewswith other car wash companies had beenimplemented, and some measurements.After collection of the necessaryinformation the specifications ofcustomer requirement was presented .With these requirements a fewconcepts was generated and weighedusing the Pugh matrix for conceptsselection for further development.The final concept was furtherdeveloped and a design has beenpresented.

This masters thesis concerns a modeling project performed at Volvo Technology in Gothenburg, Sweden. The main purpose of the project has been to develop a physical model of the climate in construction vehicles that later on can be used in the development of an electronic climate controller. The focus of the work has been on one type of wheel loader and one type of excavator. The temperature inside the compartment has been set equal to the notion climate. With physical theories about air flow and heat transfer in respect, relations between the components in the climate unit and the compartment has been calculated.

The competitive nature of the automotive industry has always implied a necessity to improve product development concerning time-to-market, cost and product quality. As capacity of computer-aided engineering (CAE) tools has evolved, so has the strive for simulation-driven design. Virtual durability testing using full vehicle models is one of many challenges posed in front of vehicle manufacturers when computer simulations are given a key role in product development.This thesis has been initiated as a preliminary step towards implementing dynamic virtual durability testing in the development of buses and coaches at Scania. The objective has been to assess the predictability of a full vehicle coach model and to what level of precision structural loads can be predicted. Previously performed proving ground testing of a Scania Touring coach has been the basis for the modelling and simulations in this thesis.A virtual model of the Scania Touring coach has been created in multi-body simulation software package MSC.Adams.

The purpose of this paper has been to find out what motives buyers of forest property has for there purchasse, what competence they have in economics and forestry, and what analysis they had done before the purchase. The study is based on interviews with nine different buyers from two geographical areas, five from Hälsingland and four from Småland/Skåne. A forest property is a property where the value to 100 % consist of forest. A part from the interviews every purhase has been analysed in comparison to an estimation of the yield value. The theoretical yield value was estimated with a computer programme.

Syfte: Studiens syfte var att undersöka samband mellan hur universitetsstudenter skattar sin fysiska aktivitetsnivå och hur de registrerar aktivitetsnivå med hjälp av dagbok samt att se om de kom upp i ACSM (American College of Sport Medicine) och WHO´s (World Health Organisation) rekommendationer.Metod: Studien hade en icke experimentell, deskriptiv och korrelerande design där 26 försökspersoner, två män och 24 kvinnor, rekryterades via anslag. De fick först svara på en enkät och därefter registrera sin aktivitet via en 7-dagars aktivitetsdagbok.Resultat: Studenterna ansåg inte att de hade en stillasittande livsstil och alla deltagare utom en ansåg sig komma upp till ACSM´s rekommendationer av fysisk aktivitet 30 minuter per dag av måttlig intensitet alla dagar i veckan. Trettiofem procent kom inte upp i WHO´s rekommendationer och av dessa överskattade 67% sin fysiska aktivitetsnivå. Sextiofem procent kom inte upp i ACSM´s rekommendationer och av dessa överskattade 94% sin aktivitetsnivå.Konklusion: Studenterna hade en låg fysisk aktivitetsnivå utifrån ACSM´s rekommendationer och majoriteten av de som inte levde upp till WHO och ACSM rekommendationer överskattade sin fysiska aktivitetsnivå. Det krävs dock mer omfattande studier för att dra några generella slutsatser då denna studie hade en skev könsfördelning och ett lågt antal deltagare.Keywords: Self-estimation, Perception, Activity diary, Physical Activity level, Overestimation. .

Preporsition for bachelor thesis project, working from the inside and out. Emphasising spatial quality and experience, More or less ignoring form and program. I?ve had issues with these aspects in earlier project, the form or the program takes alot of place in the project. I haven?t tried this approach before, it?s an attractive thought to allow the project take a form of it?s own, enclosing those spaces i create.The initial concept was to place the pools on the ground (not digging them into the ground) making them volumes that divide and define spaces.

This study was conducted in the "Kåtaberget" forest reserve in Västerbotten in the summer of 1999. In the summer of 1995, a prescribed burning was performed in the reserve. In some places where coarse dry woody debris (logs and stumps) was present, the fire consumed the wood, as well as parts of the humus layer, creating deep-burned patches. The low intensity ground fire also created dead woody debris by burning off living trees with open fire scars, as well as standing dead trees. In this study, the post-fire tree seedling establishment was examined, with special attention given to the former presence of woody debris. The study also includes a survey of the areal extent of deep-burned patches, as well as an examination of tree seedling establishment in these patches, compared to other burnt ground.

There are very few studies that have taken the matter of teacher?s leadership in disciplinary actions into research. That is why the purpose of this essay has been to investigate the relationship of how students think their teachers appear in questions of discipline. The study has been narrowed down to gather and analyze the experiences that students have about teachers, and how teachers uphold and set themselves to ground rules in the classroom. The study has shown how the students interpret teacher?s act of following up consequences of classroom rules.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.