Diskussionsforumet Flashback Forum har med sin slogan ?Yttrandefrihet på riktigt!? etablerat sig som det forum på Internet där kontroversiella åsikter och provocerande material får fritt spelrum. Detta gör forumet till en tacksam forskningskontext när det gäller föreställningar om något så allmängiltigt som välfärdsverksamhet. Studiens syfte är att synliggöra de föreställningar om socialtjänsten och socialarbetare som finns på Flashback Forum, bilda en diskurs av dessa och sedan jämföra diskursen med andra diskurser kring samma fenomen. Flashback Forumdiskursen genomsyras av fyra teman; Misstro mot socialtjänsten och socialarbetare, Socialtjänsten och socialarbetares verksamhet, Socialtjänsten, socialarbetare och kön samt Tilltro till socialtjänsten och socialarbetare.

This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

The logistic business Svenska Retursystem AB was founded by the Swedish retail sector in the year 2000, and their introduction of a grey plastic crate to the supply chain for perishable goods changed the situation for the swedish horticultural sector. The new system revealed several challenges to be tackled by all actors, from the small family firm to the bigger organisations. Whereas the initiative comes from the customer himself, from the horticultural sector ?s point of view, a refusal of the new packing is a hard decision to take. It is however interesting that a comparison between the two systems, shows in favour of the corrugated board boxes, not only concerning environmental aspects but also for economical and ergonomical reasons.

In order to reach the environmental targets, set up by the EU, there are many measures taken to make Sweden more energy efficient. In the housing and real estate sector, an installation of an exhaust air heat pump that reuses the heat in the exhaust air in order to lower the amount of acquired energy, is an example of such an action. The recovered energy can then be used for heating of radiators and tap water. This report aims to evaluate and compare three different systems using exhaust air heat pumps regarding COP, degree of coverage and cost savings. This study was delimited to only account for apartment buildings.The theory chapter describes the different conditions and factors that affect a building?s energy balance.

Floor signs in stores have become a more common phenomenon during past years. The problem is that the knowledge about these signs is limited and the actual effects are unknown. This lack of knowledge can have a negative impact on store performance and marketing efforts. The purpose of this paper is to examine the effects of floor signs on consumer attitude and behaviour. The study was conducted in two grocery stores, where the movement pattern of 39 501 customers was recorded over a four week period.

The development of software was considered until the beginning of the 1990th as a cathedral like product development in closed companies. This way of development changed in the last decade. Open source software (OSS) development challenged this consideration significantly. OSS is produced in co-operation by skilled people, distributed and used by many moral agents. The result, the software itself, can be studied and modified.

The aim of this study was to investigate whether a direct shift inpostural alignment results in changes in voice source characteristics. Ninemales with untrained voices were recorded standing in ideal posturalalignment and in the deviant postures swayback and kyphosis characterizedby extended hips and a slump back respectively. The voice source wasderived from the audio signal by inverse filtering. The parameters pulseamplitude, maximal flow declination rate, level difference between the firstand second voice source partials, closed quotient and the normalizedamplitude quotient in relation to subglottal pressure were compared betweenideal postural alignment and swayback and kyphosis respectively. Resultsindicate an impact of changed postural alignment on the voice source.Swayback posture gave significantly less pulse amplitude and maximal flowdeclination rate and significantly higher subglottal pressures thus resulting ina less effective phonation.

Slopes in fine till soils are exposed to surface erosion due to rainfall, snowmelt and upland water sources. Large areas of road slopes are therefore covered for surface erosion protection. Preventive methods like ditches and trenches are also being used. Silt tills are particularly troublesome since the water can bring the soil into suspension and cause mudslides. Different methods for erosion protection have been studied in this work, with the emphasis placed on rockfill covering. The need for and the dimensioning of this type of covering has been examined in literature and field studies.

I denna rapport utreds olika metoder för att kunna reglera vattennivån i vattenkraftverket Avesta Lillfors i Dalarna. Två kraftverk ligger endast 900 m uppströms och detta gör att svarstiderna blir korta och regleringen blir lätt nervös. Att använda sig av vattennivåreglering i ett kraftverk för-enklar dess styrning då anpassning till inflödet sker automatiskt.En flödestabell har tagits fram genom mätningar i turbinen, med hjälp av Winter-Kennedy-metoden. Denna tabell används för att kunna fram-koppla regulatorn och därmed dämpa stora variationer i inflödet. Dessu-tom har en modell av älven skapats och testats med en återkopplad PID-regulator.

This study examines regional integration in Africa with a focus on the Common Market for Eastern and Southern Africa, COMESA. COMESA, with roots that go back to the beginning of the 1980?s, is one of the largest and most diverse areas for regional integration in Africa and has currently 19 member countries. The goal of the COMESA co-operation is to become a fully integrated area by the year 2025 that will merge into the African Union (AU). AU will then, in turn, create a fully integrated African continent in a not too far away future.

Sydkraft Vattenkraft AB owns and operates the Traryd hydropower plant, located in the river Lagan in the southern part of Sweden. The gravity dam is classed according to RIDAS guidelines (Hydropower Industry Dam Safety Guidelines) as a class 1B dam. This means that the dam must discharge a class 1-flow which has a return period of 10 000 years. The inflow into the dam has been calculated in an earlier report to 495 m3/s, with a waterline at an elevation of 126, 3 meters above sea level. The gravity dam has a discharge system with two rectangular weirs, which results in a smaller discharge than the necessary 495 m3/s.

The objective of this work was to introduce measures to reduce energy and water demand at Gävle Söder 17:10. To succeed, this energy audit has been made. The work is based on collected statistics from the property owner Norrporten, measurements, literature review and through consultation with experts in the field. Two models, one for each building, have been created in the simulation program BV2 to estimate the potential of energy measures based on the collected information. The models in BV2 have been verified against the statistics of the energy consumption.With the help of calculations and simulations, seven cost-effective measures have been identified.

Spelifiering har funnits genom historien, utan att det tidigare har definierats. Spår av användning av begreppet finns på Internet sedan 2004, men begreppet blev populärt först runt 2010. Spelifiering kan beskrivas som en process där det lånas komponenter och upplägg från spelvärlden som appliceras på verksamheter som traditionellt inte hör samman med spelande. I vår undersökning riktar vi in oss på kopplingen mellan spelifiering och lärande, alltså spelifierat lärande. Syftet med denna studie är att ur ett diskursanalytiskt perspektiv beskriva vad det är som kännetecknar spelifierat lärande.

The thesis investigates if it is possible to replace several pumpimpellers with one controllable pumpimpeller, with a economical and a manufacturing analisys aspect. The studied pumpimpeller is mounted on a midrange wastewaterpump, N3127MT.In the thesis a contemplated manufacturing process is evaluated for a concept that are supposed to act as a controllable pumpimpeller. The pumpimpeller are studied in a manufacturing and flow matter and are presented in the thesis.The manufacturing cost is also estimated, and this has been compared to the storage cost and other costs that the existing pumpimpeller generates.The thesis also shows that the concept has minor losses in cutting quality aswell as the effiency comparing to the existing pumpimpeller.The concept also raises the manufacturing cost and this increasing cost makes the presented concept to expensive to carry through.An investigation of the costs that the existing pumpimpeller produces has also been done, and this shows that there is not that much expenses to earn regarding to for example the storage cost. The storage cost includes information from Flygt?s central storagecenter in Lindas, Sweden and Metz, France, and also an inventory about the pumpimpellers located at Flygt?s different distributors worldwide.The thesis shows that a controllable pumpimpeller will generally increase the cost for the pumpimpeller and the performance of the pumpimpeller will decrease..

This thesis is   focused on identifying and documenting all   electrical equipment, such as devices, power lines / cables, and connectors in the facility and also on presenting a brief   technical description and information of the systems around the reactors.   Furthermore there will be a brief description of LabVIEW - which is a   graphical programming language- and which devices / elements   are programmed. For further notification, I am not   responsible for the programming of the devices in LabVIEW   which I have only used as a tool in my work. The plant   for production of biogas consists of four reactors   of which the third reactor (Lakbädden)   is connected to another reactor (UASB)   where they cooperate with each other.   The reactors are used for producing   biogas in the form of methane gas.The reactors I and II are   connected to, various electrical devices as, flow meters, temperature   sensors, frequency converter and   more.