Water logistics has long been a problem in order to effectively carry out stump treatment in both thinning and final felling. It is important that the stump treatment? equipment is configured as well as a sufficient amount of water is carried out on the harvester to get a cost? effective treatment. The flow control of the equipment has improved and water can be dispensed more efficient, but still the amount of water on the machine is a crucial factor in the total cost estimate. The knowledge of the tools available to bring water as well as the internal logistics of loading and transport to the felling site is deficient. Increased focus on "smart" solutions to manage water cost is of great importance in order to combat Hetrobasidion spp in both thinning and final felling. The purpose of the study is to describe and summarize different solutions of water logistics at stump treatment in final felling.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

Ala sawmill in Ljusne, Hälsingland, has increased its flow through the sawing plant during the last couple of years. The problem now is the sorting plant, as this part of the mill is now slower than the rest. A close analysis of the sorting plant was therefore necessary to be able to increase the flow through. The aim of the project was to find solutions that can lessen downtime and increase flow. The goal was to increase the flow from 650 to 925 logs through the sorting plant per hour.

Författare: Johan Lindgren, Markus MattssonKurs: Examensarbete i Medie- och kommunikationsvetenskap Institutionen för journalistik och massmedier, Göteborgs UniversitetTermin: Höstterminen 2009/10Handledare: Britt BörjessonSyfte: Syftet är att undersöka innehållet i chefredaktörsbloggar.Metod: Kvantitativ innehållsanalysUppdragsgivare: DagspresskollegietMaterial: 135 blogginlägg av 9 chefredaktörerHuvudresultat: Undersökningen beskriver hur chefredaktörens blogginnehåll och mängd inom ett ämnesområde varierar beroende på tidningarnas storlek. Det är också väldigt få chefredaktörer inom dagspressen som driver en blogg. Chefredaktörernas bloggar innehåller ämnen som sträcker sig från det privata till information och åsiktsmaterial. Bloggarna har som funktion att informera, påverka och skapa relation till sina läsare. Tidningar med stora upplagor ägnar sig främst åt att informera medans tidningar med små upplagor är mer relationsskapande och frispråkiga i sina bloggar.

Denna studie har resulterat i ett nytt koncept med tillhörande design för hur individualiserad informationspresentation till förare i bilar skulle kunna se ut. Designen har framkommit genom litteraturstudier, State of the Art studier om informationssystem i dagens nya bilar, domänexpertintervjuer och användarstudier i form av Goal Directed Design. Slutligen utvärderades designen. Litteraturstudierna gav en god grund för vilken informationspresentation som finns i bilar idag. State of the Art studierna resulterade i en sammanfattning av nya informationssystem som fanns i tre nya bilar från tre olika bilmärken.

This qualitative study aims to investigate some secondary school teacers' attitudes to and experiences of motivation in their second language classrooms. Through qualitative interviews with five teachers some different perspectives on motivation and its function in second language acquisition have come to light. First, motivation is seen as something important and some teachers tend to distinguish between intrinsic and extrinsic motivation. Those who do so tend to value intrinsic motivation more highly. Secondly, teachers believe they can affect students' levels of motivation.

The Sitting while waiting for sustainability project goal was to make a functional model for a resting chair and to make it by using furniture and artefacts as material. A try of understanding the process of re-design and to use it to design was driving the project through. The result was a prototype made out of a bed frame and 18 pair of jeans and with details made out of leather..

This study investigates how consumer attitudes toward a company are affected by the company?s Corporate Social Responsibility work and their marketing efforts thereof. The Swedish fast food chain ?Max? provides the empirical setting. The theoretical framework for the study is based on Vanhamme and Grobben?s (2009) model regarding CSR?s effect on a company?s reputation, which is connected to perceptions? effect on attitude based on Fishbein and Ajzen?s (1975) theory.

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

The aim of this thesis is to examine possibilities concerning subject access to fiction film, i.e. appropriate ways to describe fiction film for subject retrieval. Problems regarding subject indexing in general, and subject indexing of fiction film in particular, are identified, as well as the uniqueness of fiction film and film genres. Four types of subject aspects are discussed: form and genre, fictitious characters, setting, and general topics. Several guidelines, form- and genre lists, and subject headings lists are examined and treated as potential indexing tools.

Who would not like a profit of more then 95 % in a day? Investors in Sweden had thatopportunity, if they had bought a certain stock on the primary market and sold it on the firsttradable day at the Stock Exchange. Most of that profit fell into the hands of institutionalinvestors. The reason for this extraordinary profit was the underpricing of that specific stockduring its initial public offering (IPO).Our report aims to analyze the relationship between offer price, underpricing and theownership structure of stocks. Our investigation is based on all IPO?s on the Stockholm stockexchange during the years between 2000 and 2005.

Volvo Penta has been producing boat engines since 1907 and are world leading in this seg­ment. They have today an extended range and also sell industrial power stations. Quality, safe­ty and environmental care are three core values for Volvo and together they strive to give their customers the right product with the right quality.Volvo has developed a production system named Volvo Production System, VPS, and one of the pillars is continuous improvements. Within this pillar you can find value stream map­ping, which is used to analyze the value stream through the process. This tool gives a wide perspective and helps to keep focus on the entire process instead of just parts of it.Volvo Penta in Vara has earlier done value stream mapping but without good results since they didn?t take set-up times and imbalances in account.

AbstractThis paper intends, through a qualitative study to examine and analyze how a particular type of financial firms cooperate, and what this entails. The case study issue which shall be answered is "What does the firms Credit Suisse and Orn & Cie SA gain out of cooperating with each other?". By setting the general theories in the subject joint ventures, partnerships, against the empirical material gathered via interviews and data collection in Geneva, Switzerland  answers to what the cooperation between the two parties has resulted in for the respective companies has been found. The survey shows that the prevailing model of cooperation creates significant benefits for the two companies.

The purpose of our study is to determine whether a membership in FRII exercise any influence over the fundraising organizations accounting and work, and if that?s the case we want to study the effects.We began with a search for information about the theories we intended to use in our study and to establish hypotheses. We came to the conclusion that the agency theory and the stakeholder model were the most relevant theories for our work. We also chose to discuss problems in accounting, legitimacy theory and standard setting.We decided to conduct a total opinon poll due to the fact that FRII only have approximately seventy members. We also decided to conduct a cross section approach which means that the attempt of our study is broad but rather shallow.

The market for heavy duty engines is constantly requiring engines that should be more andmore powerful, while still maintaining low fuel consumption. As a result of increasing enginepower, the engine and coolant temperature increases as well due to insufficient coolingperformance (because of design issues, cost etc.).Also, emission legislations, both current and future, require more and more measures to betaken by engine manufacturers. One way of meeting the legislations is the use of cooled EGR(Exhaust Gas Recirculation), which also lead to increased coolant temperatures.Both these factors also naturally lead to increased engine oil temperatures, the consequencesof which are not thoroughly investigated.This thesis project aims to investigate effects of high temperatures on engine oil degradation,with focus on the greatest degradation process: oxidation. To do this several engine runs havebeen performed on a 310 hp engine with EGR to see what happens to the engine oil in a realengine when exposed to high temperatures. During the tests oil samples have been taken andanalysed for important parameters.As a complement to these engine tests some laboratory oxidation testing have also beenperformed, to be able to compare engine test data with laboratory tests.One goal of the project was to try to formulate an empirical oxidation model, which would beable to predict oil oxidation levels in an engine, given any running parameters.