The purpose of this paper is to present a possible understanding of why the company Tekola is segregated according to sex. In accordance to this purpose, an understanding of how the segregation affects the employees in relation to power, values and possibilities is discussed. The theoretical understanding is that the organization of men and women within Tekola is done in close connection to creation of the meaning of gender in Tekola. This, in turn, affects and is affected by the recruitment to and within the company. Through the study of statistics from a survey, five interviews with employees and former employees and Tekolas? equality plan, we are able to see the possible existence of a Glass ceiling, and a culture of homosociality, which affects the possibilities of women to enter the company and also to gain full entrance to power-positions in a negative way.

The Swedish building stock accounts for nearly 40 percent of the total energyconsumption in the country. Properties built today are likely to last for 100 years orlonger. This places high demands on long-term and smart energy solutions that willkeep the future Swedish building stock energy consumption at low levels. This thesishas focused on examining how the energy performance of buildings is affected bydifferent choices of window types in different cardinal directions. The objective wasto obtain a basis for recommendations on how window properties can be optimizedfor different types of buildings and orientations.

Emhart Glass är ett världsledande företag som tillverkar och utvecklar utrustning för hela processkedjan inom glasförpackningsindustrin, från smältugnen till efterbehandling och kontroll av de färdiga produkterna. Glasförpackningarna är mycket heta när de är klara och hålls därför ovanför en perforerad platta, Dead Plate, för kylning innan de transporteras i en båge ut på transportbandet som skickar vidare förpackningarna mot efterbehandling, kontroll och paketering. Den mekanism som utför transporteringen av glasprodukterna är uppbyggd av en elmotor och en luftcylinder. Mekanismen kallas Pusher 860 och kan tyvärr inte garantera en tillfredställande förflyttning. Glasprodukterna påverkas av centrifugalkraften vid den bågformade förflyttningen ut på transportbandet och hamnar sällan allihopa på en rät linje.

Emhart Glass AB är en världsledande internationell tillverkare av automatiska glasformningsmaskiner för framställning av olika glasprodukter bl.a glasflaskor och glasburkar. Emhart Glass AB har i dagsläget 14 kontor i 10 olika länder och är sedan 1998 ägt av Bucher Industries. Den svenska divisionen är uppdelade i två enheter. I Örebro tillverkas maskindelar, reservdelar och strategiska komponenter. Komponenterna skickas sedan vidare till Sundsvall för del- och slutmontage.På Emhart Glass Sweden i Örebro har det uppmärksammats att långa ställtider förekommer vid vissa maskingrupper.

This report covers the thesis done by mechanical engineering at the engineering program at the University of Halmstad. Student Work Development of packaging in the food industry includes 15 credits and has performed over 20 weeks in spring 2009. The thesis work is a compulsory part of education and aimed at the student must apply the knowledge it has given during training in a project related to reality. Student work has been carried out in cooperation with Hanson & Möhringen AB and the project's main objective was to develop an environmentally friendly packaging to their brand Falk Salt. When salt is one of the world's cheapest commodity was packing all the costs have to be as low as possible.

Emhart Glass är världsledande tillverkare av automatiska glasformnings¬maskiner för framställning av bland annat glasflaskor. För att möta marknaden på ca 200 miljarder glasbehållare per år vill Emhart Glass utveckla sin produktion mot flödesstyrning och ett utjämnat flöde. Syftet är att minimera ledtider för att kunna reducera genomloppstiden samt hålla låga lagernivåer. Små lager och kort genomloppstid ger en lägre kapitalbindning. På Emhart Glass Sweden AB i Sundsvall där examensarbete har utförts sker montage från minsta detalj till färdig glasformningsmaskin.

Henriksson, I & Jönsson, M. Den svenska glasburken. En diskursanalys av Statens Offentliga Utredningar/ The Swedish Glass jar. A discourse analysis of official government reports. Examensarbete i Socialt arbete 30 poäng.

This is a paper about the social services waiting rooms. Our aim with the study has been to:?Describe and problematize the physical environment in social services waiting rooms. A wider purpose is to lift the question about the waiting room as a significant part of peoples encounter with the social services.? To be able to achieve this purpose, we have used two questions: What does the physical waiting room environment look like in social services in Stockholms län? How can we understand and problematize the physical environment factors impact on people who visits these environments? We have observed and photographed ten waiting rooms in ten different social services in Stockholms län.

A passive house in Norra Djurgårdsstaden drawn by Tengbom Arkitekter is going to be built. A shaft for airing is needed for a few apartments in the house.The airing shaft is designed for a few two room apartments in the house, which are not able to achieve satisfactory airing, as their outer walls are facing a single direction. The other apartments on the same floor are corner apartments. These apartments do not have the same difficulty with airing since they have their outer walls in different directions, with different pressures at the facades. The airflow in the airing shaft is supposed to be driven only by natural forces, by the sun. The purpose of natural driven forces is to achieve low energy consumption for the house.In this thesis, a design of the shaft for airing has been developed.Initially an open shaft for all apartments was analyzed.

The title of the final thesis is Filmic landscapes ? film as representation, tool and practice in landscape architecture. The aim of the final thesis is to investigate how film as a medium can be used to describe, interpret and manipulate the understanding of a place and its design. What kind of aspects of landscape architecture can film as a medium in a design-process emphasize or create? How can filming, as a self-standing act, contribute to the understanding of the landscape and a landscape-related design-process? The thesis is divided into two parts, one theoretical part that consists of an essay, and one practical part that consists of a 11minute long filmic reflection of the ?Glass-houses?in Kosta, Sweden, created by the Swedish designer and architect Bruno Mathsson.

Background: Studies that have been made in male-dominated organisations shows that only few women have succeeded in advancing to the higher positions in all businesses. Statistics shows that merely 4 % of the managers in all building companies are female. The manager role has earlier always been classified as most suitable for men resulting in barriers for women who strive for management positions. This problem is now very renowned and is called the Glass ceiling. To improve the current situation, both the organization's structure and culture, have to be modernized for more women to succeed and get the courage to get into the industry.

Phosphorus is the single most potent contributor to eutrophication of freshwater and has also been shown to contribute to the toxic algae blooms in the Baltic sea. The dynamics and paths of losses of phosphorus from arable lands are not fully understood. It is known that phosphorus can be lost directly from plant material to water. In studies where plant material has been subjected to several freeze-thaw cycles, large amounts of phosphorus have been lost. Most studies have been conducted under field conditions, with many factors effecting the measured losses of phosphorus, such as weather and type of soil. This study was performed in a controlled environment without the presence of soil. Instead of soil, small Glass beads were mixed with the plant materials in vessels, to make possible homogeneous leaching with water through the mixture of Glass beads and plant materials. In this study, clover, ryegrass and dry straw were cut to pieces, approximately 2 cm long.

Introduction: How to implement and integrate cultural aspects in strategy making and planning in order for cities and regions to reap both social and economic benefits has been widely discussed in recent years. This method of working with culture, both as an economic, as well as an identity strengthening tool has come to be labeled as cultural planning. But in order for these ideas about cultural projects and institutions to become a reality, something has to be done. This is where the entrepreneur enters.The Glass Factory, a newly opened cultural establishment in the heart of the Glass Kingdom in Småland, Sweden, became the subject of empirical investigation for this paper. As this originally was an initiative from Emmaboda municipality the planning and start-up procedure could be viewed as a cultural planning process.

This pre-study investigates the possibility of U-value measurements through an acoustic method. A hypothesis about an acoustic model built on acoustic theories combined with U-value theories is presented to answer the questions: ? Can U-value theory be combined with acoustic theories? ? Can the coefficient of heat be affirmed trough an acoustic measurement? The idea for this dissertation begun with a logical idea in mathematical similarity, between the coefficient of heat transmission units and sound intensity units. The U-value theory is based on assumptions such as initial resistance for inner walls and initial resistance for outer walls. The resistance in the material is interpreted through sound intensity theory. The argument is built upon mass law theory, which means if the frequency or thickness of the material layer doubles it implies an increase of sound reduction by 6 dB.

This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor Glass wool with a sewn on steel wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.