Electronic article surveillance (EAS) is widely used in shops and libraries together with an RF-tag attached to the goods or books in order to prevent shoplifting. By implementing the addition of a moisture sensor to the RF-tag, other functions become possible, including the ability to use as an alarm with regards to frozen goods, which have been shipped but which have melted and have, subsequently, refrozen. In- relation to care for the elderly, one time-consuming step involves checking whether there is the necessity for a change of diaper and this can, instead, be based on an RF-tag with an EAS-system alarm. A preliminary investigation was made using the moisture sensors, which involved how the resistance changes when liquid and/or heat is applied. A simulation of the LCCR circuit (RF-tag with the sensor) was conducted in order to determine how the resonance frequency changes for different resistances levels.

The purpose of this study is to investigate how six students at a Secondary School describes interaction patterns among teachers when students express in a way that the teacher perceives as racist and/or xenophobic, by presenting a qualitative interview study. The interviews were analyzed by two opposing models of value education: the traditional and the constructive model.The results show that students divide teachers in different categories based on five qualities: 1) they listening, 2) they accept students' opinions, 3) they allow discussion, 4) they are knowledgeable and 5) they can express their own opinions.These qualities are included in the value pedagogical model for deliberative conversations, whose strategies for interaction aim to create an understanding of different rules and values, thereby creating skills of rules by using a democratic approach. In contrast to this model, the rule-based moral education, in which the teacher uses his authority and refers to rules without giving an explanation for why they occurred, as strategies. .

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withdrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

The aim of the study was to investigate how four pupils in sixth grade use language when writing narrative texts, examined in relation to the typical structure and linguistic features of a narrative text. Another aim was to explore the similarities and differences between texts which received an A or B grade and texts with a D or E grade. The pupils? texts are analysed from a systemic-functional perspective on language and on the basis of the typical structure and language of a narrative text, with the focus on expressions of time, processes, descriptions and nominal groups (cf. Johansson & Sandell Ring 2012).

Two ecological models of nitrogen processes in treatment wetlands have been evaluated and compared. These models have been implemented, simulated, and visualized in the Modelica language. The differences and similarities between the Modelica modeling environment used in this thesis and other environments or tools for ecological modeling have been evaluated. The modeling tools evaluated are PowerSim, Simile, Stella, the MathModelica Model Editor, and WEST. The evaluation and the analysis have been performed using McCall?s factors for software quality (McCall et al, 1977), a correlation analysis and the Constant Comparative Method (Glaser&Strauss, 1999).

?Liberal Democracy? is a common term in political theory, and it is used as if it had a commonly accepted referent, with both normative and descriptive content. This is certainly the case in democratic theory, where it on the one hand seems to refer to a normative democratic model; on the other hand it is used descriptively, to refer to real-life democracies. The deliberative democratic sub-field is not an exception; on the contrary, the term is frequently used albeit rarely defined; yet the concept it refers to is supposedly developed enough to allow detailed propositions about its citizens?s political behaviour.This essay is an attempt to analyze how Liberal Democracy is used by three deliberative democrats (Jürgen Habermas, John Dryzek and Stephen Elstub), in order to understand the democratic model (or models), whether normative or descriptive, they refer to.

Begreppet ekosystemtjänster kan användas för att tydliggöra värdet av landskapets funktioner och därmed underlätta kommunikation mellan markanvändare då olika intressen konkurrerar. Emellertid finns det få studier som inkluderar en kvantitativ eller kvalitativ värdering av ekosystemtjänster på landskapsnivå. I detta arbete har markanvändning och ekosystemtjänster studerats i ett landskapsperspektiv, med Vilhelmina Model Forest (VMF) som studieområde. Den övergripande frågan i VMF är hur rennäring kan kombineras med andra markanvändningsintressen, huvudsakligen skogsbruk. Syftet med studien var att göra en kvantitativ värdering av markanvändningsintressen och ekosystemtjänster.

This thesis explores the changing prerequisites for accountability in terms of Swedish arms export. The study aims to uncover what has happened with the conditions for accountability in Sweden since the responsibility for export control was transferred from the government to the public administration. By investigating how the term ?accountability? has been used in the literature of democratic theory, an abstract ideal model is being created.  Comparing the changed structural arrangements, with each other and the ideal model, it is concluded that the prerequisites for accountability now seems to be in a worse state than they were before..

Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.

The society of today is largely dependent on electricity and the dependence does not show any signs of declining. Reliability of supply will become increasingly important in the future and it is therefore important to investigate factors affecting the failure rates in electrical components.Sweden was hit by several severe storms during the 00?s. As a result of this many overhead lines in forests were cablified. In urban areas underground cable systems have been the norm for many years.

How projects are managed can have a big impact on the project`s result. There are different types of frameworks on the market whose purpose is to help project leaders to pursue a successful project. Those frameworks focus on larger product development projects and both the literature and companies have addressed that the frameworks are too comprehensive for smaller product development projects. They have therefore asked for a framework that is more suitable for those smaller projects. To complete a project on time and to the planned cost is important in both larger and smaller product development projects.

This paper explores a model for self-assessment of purchasing maturity in large companies. The author adapts contemporary purchasing theory and further enhances existing tools and procedures to create a survey based instrument for maturity measurementThe paper also explores potential methodological challenges associated with conducting a more extensive study of purchasing maturity via the proposed model. A preliminary study is made and the learnings discussed.The preliminary findings of the survey indicate that the purchasing maturity varies with industry. The purchasing function average score was found to be 3,4 out of 6 with samples spread across the whole spectra ? agreeing with previous theories stating that the purchasing maturity is highly varied between different industries..

This is a report for a bachelor degree thesis in electronics at Umeå university. The target was to design a fully functional PCB-layout and then solder components to it. In order to do that I had to first proofread a schematic of the system to find things that were not correct and correct them. The project is a cooperation between the author and the company Calmon Stegmotorteknik. During the whole project the people at Calmon supported the author with the appropriate knowledge to complete the tasks.