Magnetic resonance imaging (MRI) is a safe and painless diagnostic method. The patient may become concerned, suffer from anxiety and experience the examination as unpleasant. Detailed information and a good treatment can reduce anxiety and distress for the patient. The purpose of this study was to illuminate the patient?s experiences in connection to MRI, and to describe the patients needs for information and treatment.

This report treats two assignments that concerns the biofuel furnace at Billerud Skärblacka AB and how these assignments were solved. The assignments were: reducing the number of CO-spikes and tuning the overfire air control loop. To reduce the number of CO-spikes the possibility that skewness in mass distribution affects the number of CO-spikes were study. The skewnwss of mass distribution was controled and adjusted with two experiments. The conclusion that was made is that the skewness of mass distribution were not sufficient enough to affect the number of CO-spikes.

The aim of my study is to get an idea of how some teachers use homework, what they consider a good homework is, and what considerations they take to the students' home circumstances. I have made a qualitative interview study with four middle school teachers. The results of my study show that teachers can flip the classroom and use so-called preparatory tasks. The time saving aspect is a strong reason they choose that model. That students are able to practice their own responsibility and perform meaningful homework seems to also be in focus, but the biggest reason they use flipped classrooms seems to be because it is a more equivalent homework then traditional homework, and that students and their guardians also appreciate the flipped classroom model as they become more involved in their children's schoolwork..

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

This master thesis deals with problems in the arc length control in Pulsed MIG/MAG Welding. The main problem is that it is not possible to measure the arc length. In the present solution the voltage over both the electrode and the arc represents the arc length. To improve the arc length control a model of the electrode melting has been built. One output from the model is the voltage over the electrode and with this voltage together with the measured voltage it is possible to calculate the voltage over just the arc.

The aim of this Masters thesis is to examine librarians attitudes and values when it comes to the question if a new media, video games, should be introduced at the library or not. Video games are here seen as media primarily for youths. In our study we also wanted to study the discussions of quality and purchase, when computer games were introduced at the library. In order to answer our questions we conducted nine interviews with librarians working with children and youths, in eight libraries. By analysing their statements, using Maj Klassons theory where she defines the librarians role in three different strategies, we could demonstrate how the librarians reason when it comes to video and computer games, youths, quality and purchase.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.

This is a pattern project for textiles, with main purpose to develop and challenge my design process and to experiment with a mix of different printing techniques. The goal of the project was to create three textile individuals as representatives of my experiments, inspired by natural surfaces.The world of fashion have been an inspiration and has been the model for these textiles, with its powerful and playful patterns. With the world of fashion as a model, I also chose to work with the materials habotai silk and silk velvet. The qualities of these materials has also been influential in my design language.The work has been very focused on experiementation and exploration, and resulted in three printed fabrics that I have chosen to call Björkalm, Lindstam and Lavbädd..

Introduction:Violence towards women is an extensive and important problem in the society. Confronting women who are assulted by their male partner is a demanding task for the nurses.The aim of the study:The aim of this empirical study was to illustrate the experiences of nurses in the meeting with women exposed to violence by their male partner.Method:This is a qualitative interview study including nine female nurses. The material recieved from the interviews was analysed with help of content analysis. Categories were formed named Comunication, feelings, Ability to recognize the women, Lack of time, Need of support and further education. An application to the ethical council at the University of Kristianstad were remitted and approved.

This work is about collaboration and staining in the upper secondary school Electrical program. How should the coloring go to in order to increase students' motivation and thus facilitate students' learning is the main subject with the work. The study has shown that there is a functional co-operation today, and that students believe that if the cooperation would increase. It would also in-crease their motivation to improve..

This study aims to examine preschool teachers' thoughts about the child libraries functions. The purpose is to highlight preschool children's early read and writing skills, before they even can read and write, which is a theory called emergent literacy.This is made by conducting five qualitative interviews, with the intention to investigate how the preschool teachers think about the cooperation and the function of the child library, partly for their own work with the children and partly for their organization. By using a tablechart which shows each preschool teachers mostly common thoughts in the interview and by using a model based upon Harrysson and Joelsson (2006) model, which shows the functions of the public library in the society. The results of the study are presented in the four categories of the model which are; to borrow, to learn, to ask and to find, to reside. These are functions that the preschool teachers see with the library, for their work with the childrens' early literacy.

This study presents a methodology that enables the annual average power of a wind turbine to be increased by automatically optimizing it?s airfoil, twist and chord dis- tribution. As a part of the study the software SiteOpt has been developed. This software connects the open source software XFOIL with the blade element momen- tum theory. XFOIL gives lift and drag coefficients which enable the blade element momentum theory to predict the power of a wind turbine at different wind and ro- tational speeds.

Bergvik Skog is one of the leading forest companies in Sweden who use airborne laser scanning for forestry information. They utilize laser data retrieved by the Swedish National Land Survey to describe the forest holdings and facilitate planning for thinning and final felling operations. However, the possibility to identify stands with clearing needs by using laser scanning data has not been tested in a large scale. The data used in the current study are field data from The Swedish National Forest Inventory in combination with laser data from the Swedish National Land Survey acquired in 2009. The collected data is used to find one or several laser variables that best describe the relationship of the field measured samples with clearing needs.

AbstractTitle: When book becomes film... ? a comparative analysis of the book and film Catch me if you can (När bok blir till film?En jämförande analys av boken och filmen Catch me if you can)Number of pages: 46Author: Majlinda JunikuTutor: Amelie HössjerCourse: Media and Communication Studies CPeriod: Autumn term 2007University: Division of Media and Communication, Department of Information Science, Uppsala University.Purpose/Aim: To study what model of dramaturgy belongs to the film Catch me if you can and to see what has been crossed out, altered and added from the book so the narrative will fit this model.Material/Method: The film Catch me if you can and the book with the same name has been used to analyze the differences between them. I have divided the differences into three categories: Crossed out, Altered and Added. In the analysis section these have been presented in each section of the film.Main results: Catch me if you can is definetly a film made with the design of the Anglosaxon model, mostly because of its timestructure and that it portrays an action and not just a condition which is normal in the epic-lyric model.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.