Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

Saab Training Systems (STS) in Huskvarna is manufacturing material for educationalpurposes to armies worldwide. They are now implementing parts of the Lean productionconcept in their organisation.One part of the work with Lean production is to eliminate waste. To be able to identify waste,value stream mapping is a good tool and also what we used in our thesis. To gain a betterefficiency in the production of Personnel Detector Device (PDD) flow was one of our goals.The PDD is a harness used during battle training which registers if the user is being hit by itsenemy.Our work with the thesis started up with a short education in Lean production and in valuestream mapping (VSM). The work proceeded with a VSM of the production flow of the PDD,interviews were made and studies of literature were done to gain greater knowledge of thesubject and solve the task.The VSM resulted in five areas which were followed up out of those six we identified.

Detta arbete har som syfte att jämföra olika anläggningsföretag angående hur de jobbar med tidsplanering och uppföljning av tid inom företaget samt vad de använder för verktyg till denna arbetsuppgift. Metod för studien är en kvalitativ studie innebärande ett fåtal intervjuer. Anledningen till att författarna till detta arbete tycker att ämnet är intressant att studera är bland annat för att svenskar byter jobb relativt ofta och till största delen är det unga som byter arbete i större utsträckning än de äldre. Detta gör att det blir svårare att samla på sig en erfarenhetsbank då det krävs lång tid att samla på sig en sådan. Trots detta är erfarenhet ett viktigt redskap vid arbetet med tidsplanering inom anläggningsbranschen. Uppföljning en viktig del av ekonomistyrningen och vi vill ta reda på hur och om företagen jobbar med detta. Ekonomistyrning handlar om att sätta upp mål för att styra verksamheten eller företget framåt, för att se om detta har lyckats är uppföljning något som företagen bör jobba med. För att nå syftet med arbetet och för att kunna konstatera hur de olika företagen jobbar gjordes intervjuer med respondenter från sex stycken företag, alla verksamma inom anläggningsbranschen. Företagen valdes ut med fokus på hur många anställda de har.

Arvika Fjärrvärme AB, a district heating company from Arvika, today cover 74 % of their total energy production with biofuel wich runs a 16 MW bioler giving process water at saturated liquid state.In recent years Vaporel AB has introduced a new tecnique that gives an external generation of steam after boilers. The concept is built on an adiabatic pressure drop of the saturated liquid in a so called Flashbox which makes a small part of the liquid to evaporate. The generated steam is lead into a turbine where electricity is in a conventional manner.The purpose with this rapport was to do a basic study for the specific system at Arvika where it?s possible to see the potential production of electricity that follows an installation of a flasbox.The final goal was to introduce an economic analysis of a flashox installation at given conditions.To reach our goals we have created a model in Excel where we used the given conditions at Arvika Fjärrvärme to do our calculations. The model has been tested at three different states, of process water returning to potboiler, to be able to decide the optimal operation for the system at present.The studies have resulted in a pressure of the processwater at 14,5 bar (at) and a pressuredrop to 9,5 bar (at) in the flashbox.

As a part of the fight against the global warming the energy production needs to be more efficient and redirected towards sustainable options. One alternative is cogeneration, which means that electricity and heat is produced in one plant. The purpose with this survey is to examine if there are any commercial available combined heat and power techniques, based on combustion of solid moist biomass, which are suitable to small-scale applications. The technique must be able to produce between 2 and 10 MW thermal and the heat demand is a Swedish district-heating system. When already published reports had been studied, the Organic Rankine Cycle (ORC) was chosen as the most suitable technique.

When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

Diagnosis means detection and isolation of faults. A model based diagnosis system is built on a mathematical model of the system. The difficulty when constructing the diagnosis system depends om how the model is formulated. In this report, a method is described that rewrites the model on such a form that the construction of the diagnosis algoritm is easy. The model is transformed by two state space transformations and the result will be a system on state space form where one part of the system becomes easy to supervise.

The aim of this study is to gain knowledge about the internalcommunication at a public library in Sweden, focusing on the flow of information and the library employee?s role as a source and receiver. This is an important subject because internal communication affects not only the internal work, but also the users. Despite this there are few studies about internal communication in libraries. The research questions used are: How do the employees perceive the role as source of information, and what choices do they make before they spread information? How do the employees perceive the role as receiver of information? How do the employees feel that the information flow works in the organization as a whole?The research is founded on five qualitative semi-structured interviews with the library employees.

We have carried out a study of a classification system for the Swedish collection at The Royal Library in Stockholm from 1887. It was printed in 50 copies. The constructor, Bernhard Lundstedt, and his colleagues used it as guidance in lack of a catalogue. We regard it a local classification system. Little research has been done on old classification systems, but Francis Miksa points out the importance of examining them.

This degree project deals with the creation of a business system for Gamersneed Sweden. The system is divided into two parts, one windows appliction and one websolution..

ABSTRACT (english)Introduction: The possibility to transplant an organ is an important part of the health care system, which demands great resources and a well functioning organization with a level of high competence. The work with organ donation is complex and brings forward a great amount of different emotions for the operation room nurse. Aim: The aim with the study is to illustrate the operating room nurses experience when the organ donor is brain dead. Method: Data collection has been performed with semi-structured interviews, which have been interpreted by qualitative manifest analysis. The design of the study is pilot towards a study in full scale.

Problem: What are the characteristics of Polykemi?s management control system and how is it affected by growth? Purpose: To describe and analyse the management control system of a medium-sized family-owned company from the perspective of Simons? Levers of control. Research design: An abductive, interview-based case study of Polykemi AB. Conclusion: Polykemi?s management control system is primarily a traditional one which is rather strong in terms of Levers of control.

Title: The appraiser?s choice of valuation method ? factors that influences the choice of company valuation methodsSeminar date: 04/06/07Course: Master thesis in Business Administration, 10 Swedish credits.Authors: Anne Benedicks and Veronica ÖbergAdvisor: Eron OxingProfession of category: Financial analysts, auditors and company lawyers.Key words: Company valuation, valuation methods, cash flow analysis, comparative valuation, the net asset value method.The Main Issue: What is of decisive importance when choosing a special company valuation method?Purpose: The purpose of this paper is to identify, analyse and evaluate the most common methods of valuation for financial analysts, auditors and company lawyers and those factors that influences the choice of method.Method: A multiple survey has been implemented for the actual profession categories. Primary data was collected through semi-structured interviews and a questionnaire survey.Theoretical: The theoretical frame of reference is based upon the paper?s dependent variable, i.e. the role of the appraiser.