The Swedish parliament has decided that Sweden should increase its usage of renewable fuel sources to a level of 50% of the total energy consumption in Sweden by the year 2020. One way to reach that goal may be to increase the usage of stumps as a bio-fuel. In Sweden stump harvesting is possible on about 5-10% of the total harvested area and thus contribute with 1,3 - 2,6 TWh per year. An increase stump harvest doesn't come without its drawbacks for the environment. When harvesting stumps a tracked excavator is used to pry the stumps from the ground and then cut the stumps into smaller pieces.

The comprehensive purpose of this Master of Science thesis is to examine which fleetmanagement services for engineering vehicles, ?Fleetech? preferablyought to develop inorder to reach a broad market and meet the demands of contractors.Scanty explained, fleet management is the management of a company's vehicle fleet and theservices can include a range of functions such as driver management and fuel management. Inshort the thesis encompasses four sections:1.Survey of the general contractor industry: The survey has been preformed toevaluate the potential size of the market for fleet management services in the generalcontractor industry.2.Needs analysis: The needs analysis aim was to define what contractors tasks andgoals are, and to determine what functions they want and need from a system.3.The use of CAN and the technical premises: The prerequisite for developing asophisticated and generic system is that vehicle data can be accessed from the CANbuss.The use of CAN standards in construction equipment has therefore beenexamined.4.Specification: An explicit set of requirements have been set to be satisfied by a fuelmanagement service, based on CAN standard protocol J1939.Important conclusions: The use of CAN protocol standards are extensive and the prerequisitesfor developing elementary and CAN based services good. The services should be compatiblewith different manufacture?smachines.

Overdue cleanings have for a long time been an important topic of discussion within the forestry sector. When stands that have not been pre-commercially thinned are reaching the level of commercial thinning, many problems occur in terms of decision-making and economical outcomes. These types of stands are commonly known as conflict-stands. The work was carried out partly as an interview survey towards representatives from the forest sector and the energy sector, partly as a case study of conflict-stands situated in Böksholm, north of Växjö and in Tönnersjö east of Halmstad. The criteria for the studied stands were that they had to be dominated by Norway spruce and be in a severe status of ?conflict?. The aim of the interview was to get an overview of the situation today, and also analyse trends in terms of conflict stands.

As emission legislations across the world continuously pushes engine development forward,engineers constantly need to come up with and implement fuel saving technologies. During thelast decade, variable cam phasing has become a popular solution to increase gas exchangeefficiency. This configuration is typically mechanically constrained by camshaft limitations, anda solution to circumvent this problem would be to use a different valve actuation principle.One example of this is to use pressurized air controlled by electrical solenoids. Such a systemhas been developed byCargine Engineering and this provides the starting point for this work. Tobe able to operate the valvetrain on an actual engine, a control system is needed.

The failure of Structural Adjustment Programs and its neoliberal policies to effectively reduce poverty have led to the creation of Poverty Reduction Strategy Paper (PRSP) by The World Bank and International Monetary Fund. PRSP, connected to both the Comprehensive Development Strategy and the HIPC initiative, are built on the notion of national ownership and stakeholder participation and thereby expand potential conditionality to include matters of governance. This thesis examines the evolution of PRSP and how the process of participation affects national governance structures. By analyzing the role of rules and norms within the World Bank and IMF from a historical point of view the thesis explains why the participation process has developed the way it has. It concludes that neoliberal norms, still at heart within the World Bank and IMF, have an impact on the process of participation within nation states and thereby its governance structure.

Obesity and overweight is the worst public health related disease today, and it is a constantly increasing problem in societies all over the world. In Sweden the number of overweight persons has been doubled in the last 20 years. Today about 500 000 persons suffer from obesity and overweight.The aim of this study was to investigate obese and overweight people´s thoughts and wishes regarding what support they would like, in order to be able to successfully manage a weightreduction. The study is qualitative and conducted through six interviews, the material was analysed with content analysis. The result of the analysed interviews led to four categories:offered support, wished support, are you strong enough to find support by your own and mental wellbeing.The conclusion of this study is that overweight person?s biggest wish is to get continuous and personal support from the health care system.

The forest property Fagerdal 2:10 was donated to the Swedish University of Agriculture in 1995 by Erik Rönnberg. The dominating species is Norwegian spruce (Picea Abies) and the average age is high due to selective cutting. The aim of this study has been to analyze how the forest on the property should be managed and demonstrate how a better estimated forest data affects the future management. The impact of the management on the carbon stock of the property was also examined. A forestry plan established in 2009 by Skogssällskapet was used as a basis for the analyses.

There have been changes in Earth?s climate system on both global and regional scale since the pre-industrial era and some of these changes are due to human activities such as the combustion of fossil fuels. This calls for the development of engines with a higher efficiency and less harmful emissions. One interesting concept is the Homogeneous Charge Compression Ignition (HCCI) engine, which has the advantages of potentially low emissions combined with high efficiency. However, HCCI with diesel fuel requires a relatively long fuel/air mixing time to ensure a "homogenous" charge.

The aim of this work is to demonstrate how the net present value (NPV) at the time of the first thinning depends on the spacing after pre-commercial thinning, and show how net value from first thinning in same stand is influenced. This study is performed with models based on non-distant dependent growth models for single trees. Two different growth models have been used, one for cleaning (pre-commercial thinning) and one for thinning. The first one yields stem density distributed over diameter classes. In the second one, (the thinning model), it is possible to choose when thinning should be done, the thinning method, thinning grade and numbers of thinning.

The aim of this study was to investigate the effects of an infusion of hypertonic saline solution (HSS) in combination with an oral waterload on cows suffering from rightsided displacement of the abomasum (RDA). Six dairy cows were treated with 7,2% HSS in a dosis of 5 ml per kg bodyweight. They also received an oral waterload of approximately 15 liters. To monitor changes in fluid-, acid-base- and electrolyte-balance, bloodsamples were collected during the next 24 hours. During this period, the cows also underwent surgery to empty and correct the position of the abomasum.

This thesis has been carried out at Diac Metal AB at Torsvik outside of Jönköping. The company produces parts for, amongst others, office furniture and store equipment. The essay will be concentrated on one detail which is included in many of their products.Today the company uses an ordering quantity based on experience which is rarely updated. Furthermore the operations are performed in both the company?s own engineering workshop but also an external workshop.The purpose with the report has been to check whether an updating of today?s batch shaping and ordering system can mean simpler storage control and possibly cost reduction.

The purpose of this study has been to make an inventory of combustible waste in the region around Norrköping and to investigate the composition of domestic waste, industrial waste and two different types of sludge. The work was performed at the request of Norrköping Miljö & Energi, due to the planning of an incineration plant. The inventory of the waste was performed through inspection of environmental impact reports, from waste disposal plants in a number of local government areas in the region. The quantities were also compared to another inventory, carried out in a different way. The characterisation of the wastes was compared to the fuel specification determined by Norrköping Miljö & Energi.

Uppsala County has ambitious environmental aims for the planned residential area inÖstra Sala backe. In this thesis different energy sources have been evaluated todetermine which system that would be most favorable given currently availableinformation about the project. Planned energy usage has been divided into tap waterheating, space heating and power. Three base case scenarios were made with districtheating, small scale bio fuel and heat pump. Solar power and solar heating were thensimulated and the production from the two could individually be deducted from theenergy need in the base cases, constituting 9 different scenarios.

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicin and Clinical NutritionAbstractTitle: Does supplementation of omega-3 during pregnancy affectprevalence of allergy in infants and children?Author: Peter Eliasson, Anna RahmSupervisor: Lena HulthénExaminer: Anna WinkvistProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 ECTSDate: 2012-04-12BackgroundEpidemiologic research has shown an association between a high intake of fish and allergy.The underlying theory is that allergy develops already at a prenatal stage and food intakeduring pregnancy has been shown to be significant. Conducting research on allergy isproblematic since it has genetic, as well as enviromental, determinants.ObjectiveThis thesis attempts to conclude and evaluate research on a connection betweensupplementation of omega-3 during pregnancy and allergic outcomes in infants and children.Search strategyThe literature search was conducted in the databases PubMed and Scopus. Among thekeywords chosen were omega 3, supplement, pregnancy and allergy.Selection criteriaHuman RCT, that measured allergy, where the intervention consisted of supplementation withomega-3 for at least ten weeks during pregnancy and ceased at birth.Data collection and analysisThree articles were chosen for this thesis. The articles were examined using templates fromSBU and the quality of evidence was evaluated according to GRADE.Main resultsNone of the articles showed a protective effect on allergic outcome but in one of the studiesthere was significant reduction in eggallergy and another showed significant lower occurrenceof severe eczema.ConclusionsSupplementation with omega-3 during pregnancy does not occur to have an protective effecton allergic outcome in infants and childen but the evidence for this is considered to bemoderate.

Introduction: A complex interaction between muscles, tendons, bones, joints and nerves are required for optimal function of the human hand. It is known that an individual?s grip strength is vital for performance of physical demanding tasks such as strength training with free weights. Strength training including a thicker grip around the bar may enhance the strength of the grip in the athlete without other special routines for grip strength development. The purpose of this investigation was to examine the difference in performance in multiple repetitions in two strength training exercises using two different sizes on the bar, to look for correlations between grip strength of the subjects hand and the amount of repetitions executed with two different size of the bar and finally the correlation of hand size and the amount of repetitions executed with two different size of the bar.Method: 15 strength training men (23,9 ± 4,1 years), underwent measurements of hand size, maximum grip strength, 1 repetition maximum (1RM), a 80 % of 1RM weight strength test with two different  bar sizes.Results: The results from the present investigation indicates a 21,1 % reduction of 80 % of 1 RM weight performance in repetitions executed in the bench press with the thicker diameter of the bar and a 66,2 % reduction in repetitions executed with a 80 % of 1 RM weight in the lying bench row with the thicker diameter of the bar.