The worldwide industrial demand of energy, often in form of fossil fuel, is continuously growing and at the same time these resources are coming to an end (Hamamre, 2013). The interest and focus in renewable sources are then more important than ever and plants are suggested to be a good alternative for production of raw material for industrial purposes (Nilsson et al., 1998). But the world is also facing an increasing world population which also increase the nutritional needs, plants therefore need to be suitable for both industrial and nutritional purposes. To achieve this, common plants need to be improved but it also need new potential crops to be developed and introduced (Carlsson et al., 2009). Modern technology like gene engineering is an important tool to achieve these challenges (Carlsson et al., 2011). This work focused on analyzes and evaluation of different transgenic lines of field pepperweed (Lepidium campestre L.).

In the town of Väderstad which lies in the middle of Sweden, called Östergötland is Väderstad-Verken situated. It´s an international company which produce machines for land processing and sown to farmers all over the world. Väderstad-Verken is an expansive company with 750 employees. The turnover is 1.4 billion sek. Rapid seed-sower has become a popular machine since it was introduced in 1991.

Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.

Today, there are no regulations saying that cows must have access to some kind of shelter at pasture during the summer. In more tropical countries, it is well-known that dairy cows might suffer from heat stress when exposed to sun and high temperatures. The well-being of the cows is thereby reduced and the production may also decrease. In Sweden, no research has been done in the area and therefore it is now a clear need of improved knowledge.The purpose of this study was to investigate the importance of shade for dairy cows in Sweden. The behaviour of 30 cows was examined to see any differences between cows with access to shade and cows without access to shade.

Internet commerce is nowadays a well known phenomenon. There is awareness that a lot of newly created companies operate their business through the Internet. You can see a tendency where many young people try to establish an Internet business with the hope of success and expansion on today?s fierce market rivalry. To achieve success, companies have to consider factors like business concept, logistic knowledge, future vision, resources and contacts when initializing their business.Having this in mind, we can clarify the purpose with this paper: ?To analyze in what way On-line shopping companies that sell consumer electronics, cell phones and music/entertainment products, have expanded? The paper is based on telephone interviews with three On-line shopping companies.

To have a forest area close to the city is of great importance for the city population?s well being. Children develop their motor skills, concentration and imagina-tion and the adults have a place to shake of the stress from work. Forest areas are used to exercise at, play in and to find a moment of peace and silence. The urban forest and the old farming pastures at Markussonvallen and Per-Isakssonvallen already has natural assets worth to preserve and a great potential to create more. The goal is to develop a forest with a variation of tree species and ground vegetation that will appeal to the human senses and different animal species such as birds, insects etc.

SammanfattningAtt köra en elbil kan skilja sig från ett traditionellt fordon på flera sätt. Förväntningarna från förarenmåste tas i beaktning när användargränssnittet i bilens instrumentpanel utformas.Denna masteruppsats behandlar test, utvärdering och nydesign av Huvudinstrumentet i Saabs elbilZero Emission. Huvudinstrumentet är den del av instrumentpanelen som sitter framför ratten ochinnehåller mätartavlor och andra instrument. Andra områden såsom mittkonsolen och musik- ochnavigatorsystem inkluderas inte i studien.Huvudinstrumentet testades och utvärderades med metoder, bland andra heuristisk utvärdering,Cognitive walkthrough och användartest. Användartesten utfördes i en körsimulator med hjälp avtänk-högt-metoden för att möjliggöra för observatören att följa med i testpersonen tankebanor.Med hjälp av resultaten från testutvärderingen skapades en ny design av huvudinstrumentet.Övergripande upplägg och design av individuella delar av klustret utformades parallellt.

A large part of the Namibian low income population lack access to grid distributed electricity. This mean they are effectively shut out from basic functions such as lighting, information technologies and hygienic food handling. Hence, finding ways of providing affordable off-grid electricity is an important, not to say critical, task.This master thesis is an innovation and concept development project that has been carried out in cooperation with organisations in Sweden and Namibia. The purpose of the project has been to (1) develop a concept for off-grid electricity supply in Namibia and (2) to gain a deeper knowledge within the area of innovation and product development for the Base of the Pyramid population, i.e. the poorest, but largest, socio-economic part of the global population.Essential in this project has been to acquire user understanding and to identify user needs to create a foundation for developing the concept.

Biogas is a gaseous fuel, rich in methane, produced through a biological route in an anaerobic digester. A gas engine generates combined heat and power, which can be used at the farm to reduce energy cost. The process also generates a digestate, with better utilization of nutrient compared to cattle manure. The aim of this study is to analyze the profitability of a farm-scale biogas plant for combined heat and power (CHP) at Wapnö. Wapnö is an agriculture company located in the southern part of Sweden.

There have been several projects with solar installations in Sweden, and Sala-Heby Energi (SHE) wanted to create a solar plant. The question answered in this thesis is whether it is economically viable to create such a source of sustainable, renewable energy. The plant would be built with the help of the financial effort from 120 customers. This economic union would sell the electricity to the SHE, for SEK 4.50 per kWh up to a certain level over a period of 10 years. It would be a long term commitment to environmentally friendly electricity, using solar cells which convert sunlight directly into electricity.In year 2009 there was introduced a new state aid for photovoltaic systems, to create an increased and continuing interest in solar cells.

The ?civilized? world is in need of fossil fuel in order to function. Hybricon AB is a company in Umeå that is developing a technology that hopefully can reduce parts of this need. They are currently testing their two electrical busses (with Hybrid backup) in city traffic on the roads of Umeå in cooperation with the county of Umeå.                               The busses are originally diesel-busses, but the diesel motor has been replaced with two electrical hub-motors with a power of 145 kW each that are powered by batteries.The batteries are charged at the end station after each route. In case the batteries should run low on capacity during driving, they can be recharged by the so called genset.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

Peat  lands  are  a  great  potential  resource  for  increased  forest  growth  in  Sweden, there  are  approximately  6.5  million  hectares  of  peat  lands,  whereof  around  70% produce less wood than one m3sk/ha and year and are therefore classed as forest waste  land.  There  are  over  200  000  hectares  of  peat  land  that  is  already  drained and  wooded,  and  that may  be  suitable  for  fertilization.  Forest  production  on  peat soils  usually  requires  drainage  and  fertilization.  Dewatering  requires  ditching  the area, so that the roots can have access to oxygen. Nitrogen is often abundant in the peat but other nutrients; especially potassium is in short supply. The  purpose  of  this  work  was  to examine  the effects  of  potassium  fertilization  on the  growth  of  spruces  that  were  planted  on  drained  peat  land  and  how  different amount of fertilizers affects the growth. Potassium deficiency is strongly growth inhibiting, since potassium is important for substance  transport  in  the  tree.  Potassium  is  also  important  for  the  carbohydrate formation, and because increasing the sugar content of the cells constitutes a lower freezing temperature does potassium availability in the soil play a major role in the winter  resistance  of  many  species.  Potassium  is  not  found  in  any  organic compounds in the tree, but is present in cell and tissue fluids. A fertilization trial was started in 1978 in Siljansfors Experimental Forest. The plots in the experiment were fertilized with different amounts of potassium and one plot was  left  without  fertilization.  All  plots  that  were  fertilized  with  potassium  grew considerably better than the unfertilized plot. The difference in production between the unfertilized plot and the plot that received the most potassium was 7.2 m3sk/ha and year. The unfertilized plot can still be classified as waste land. The theoretical production capacity was estimated using a Swedish system for site quality  estimation  of  wetlands  after  ditching  (dikningsbonitering).  The  plot  with most  potassium  produced  after  fertilizationaproximately  in  level  with  theoretical estimations.  Key  words:  Peat  land,  Fertilization,  Ditching,  Growth,  site  quality..

This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.