Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Bygghantverk, 22,5 hp, 2015..

Stenebergs sockerbruk is a large log-timber construction, purpose built as a sugar refinery in 1739 and is one of Sweden's oldest industrial buildings constructed entirely out of wood. Despite receiving the status of a listed building (in Swedish: Byggnadsminne) in 1977, there exists today a surprisingly low amount of documentation of the building itself. In order to enhance the existing and lacking building documentation, this case study aims to shed light on the building's log-timber built frame, focusing on how it was constructed, how the long lengths of its walls were handled and what type of joinery and tools were used. A thorough investigation of the building is conducted on site, followed by gathering of information which is then presented through text and illustrations. The findings indicate the orientation of timbers, location of joints and scarfs as well as tool marks which together contribute to the forming of a basis of understanding of the building's construction..

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.

The survey aims to shed light on traditional and contemporary bottom floor frames, their construction and different insulating materials; mineral wool, wood shavings and charcoal. The purpose is to analyze and discuss the similarities and differences as well as the pros and cons with a focus on the construction and the different insulating materials. The work has been limited to comparing two different wooden floor frames. The first one is based on a real floor frame from an older building, this example is presented as the traditional floor frame in this study and are from around 1940. The other floor frame is presented as a contemporary floor frame and is based on wood building type descriptions and literature.

The purpose of this thesis is to discuss how a Swedish public library approaches their costumers. I will show how a library interacts with their costumers compared to a business, which has a different economic work frame, a building materials supplier. My aim is to pinpoint differences and explore new methods for the library in order to improve their service.The theoretical frame of the thesis is based on Richard Norman's notion the Moment of truth. The moment of truth is the moment when a business has to convince their customer that they offer both the product, proficiency and service that the customer needs. Service encounters at two organizations have been observed and their differences and similarities compared.

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

Efforts to achieve a moisture proof construction process have proved to be considerably complicated, despite the knowledge and awareness that now exists within the moisture field. Materials, documents, templates and checklists are designed to be accessed but are not used anyway. This may be because such effort has not been prioritized and properly requirements have not existed from the commissioner of a building.This report illustrates how the commissioner of a building project can achieve a moisture proof building process by increasing knowledge, moisture proof planning, and implementation of security moisture routines. Proposals are given on how the commissioner of a building project can work to consistently bring a moisture proof building process in all stages. The difficulty with regular moisture proof efforts, the authors believe is mainly due to the following points:      Many different design solutions.      Lack of experience feedback.      Lack of communication.      Financial incentives.      Attitudes.The interviews in the report have conducted with the help of a qualitative analysis, while the survey has been done using a quantitative analytical method.

The purpose of this study was to examine the threats from climate change coverage in the media. The climate threats start to appear more frequently in the media and because of that it is important to examine what the media conveys to the viewers and readers since it may effect how people act when it comes to climate threats. In this study newspaper has been examined, more specifically daily press and evening press. The papers chosen was Aftonbladet and Expressen, which represented evening press, and Dagens Nyheter represented daily press.The method applied was both a quantitative and qualitative text analysis. With the quantitative method variables were formed and tested against the material.

Hudiksvall Municipality will build a new preschool. The goal is that the pre-school should reflect the municipality's environmental goals and meet building regulations. The wall structures that are compared in the report is an insulated wooden frame and a frame of lightweight concrete blocks from H + HWall structures are compared within the areas of U-values, air tightness, thermal storage capacity, fire ratings, moisture, durability, emissions and environment. In these categories the two wall structures will be rated in a scale from 1 to 5 and then the categories are weighted against each other. The weighting is based on Hudiksvall Municipality's assessment of the categories importanse for their final selection.The results of the comparison show that the concrete structure is recommended for the construction of pre-school with 27.55 points against the wooden structures 23.70 points.

Norrborns Industri AB in Bollnäs manufactures truck trailers with the brand Parator. One of their trailers is Parator LX 10-20. The trailer is designed to transport hooklift containers with the option to tip loose goods such as gravel, asphalt and seed. The container is mounted on a frame which is placed on the chassis. To reduce weight a redesign of the trailer is needed.

After contacting the company Elite Group Sverige AB, who sells strollers under the brand Crescent Baby, it was determined that the project group were to develop a three wheeled stroller which was going to be Crescents first own developed stroller. Only the frame of the stroller was considered within the demarcation of this project however care was taken to the placement of the carry-cot and the wheels etc. Crescent Baby wished for the frame would be smaller than the competitor Urban Jungle, that the frame would have at least three unique selling points and that the number of unique parts was to be minimized. The work began with information seeking regarding strollers, competitors, independent tests, European standards and consumer interviews. After that a number of concepts were developed and past to Crescent.

Recent studies about refugees have shown that there are differences in how refugees are framed, depending on where they are fleeing from. Studies have also shown that right-wing populism and refugee framing can be linked. With the theoretical framework of Banulescu-Bogdans three frames and right-wing populism, this study examines how polish politicians within the PiS party have framed refugees fleeing in 2015 in contrast to refugees fleeing in 2022.The aim is also to analyze how and if right-wing populist discourses are reflected in the frames. Using framing analysis, nine statements from different PiS-politicians were analyzed. The results show that the dominating frame towards refugees during 2015 was the threat-frame, contributing to frame the refugees as a cultural threat and security threat. The dominating frame used towards refugees 2022 was the victim-frame, contributing to frame the refugees as deserving and worthy of help. Furthermore, right-wing populist discourses were clearly existing in the framing of refugees in 2015. Discourses as ??us?? and ?? the other?? along with signs of nativism are reflected in the frames.

The purpose with this examination task is to investigate what purchasers and building contractors think of ISO 9000 and the function of it within the building trade.In this material both the purchaser´s and the building contractor´s viewpoints and attitude towards ISO 9000 is being object to an investigation, in order to get a just picture of the function of the quality work within the building trade. The general opinion of ISO 9000 has proven to be positive. During the work with this investigation it appeared that nosystem is that good that it can´t be improved. A widely spread opinion is also that ISO 9000 means a lot of paperwork but also that the certified companies are well organized. Above all the majority demands a standard that is more adjusted to the building trade..

This report describes the construction work of a radar antenna for the radar systemCARABAS. CARABAS is a long wave airborne ground radar that has been developed bySAAB Microwave Systems and will now be mounted on a small helicopter, Schweizer 300.The antenna should be able to fold up and down. When the radar is in use the antenna islowered and under transport, start and landing the antenna is folded up. An emergency dropfunction should also be included in the design of CARABAS III.The extent of this report includes construction of the antenna, frame structure attached to thehelicopter, mechanism for folding the antenna up and down and mechanism for emergencydrop function. The mechanical design of the antenna and frame structure is based on modaland stress analysis, vibration measurement of Schweizer 300 and frequency analysis, andcalculations regarding aerodynamic drag and mechanics.The exciting frequencies of the helicopter and accelerations at those frequencies weredetermined by vibration measurement and frequency analysis.