Headwater streams are affected by anthropogenic impacts at multiple scales. One aspect of human impact is sediment transport associated to the abundance of stream structures as large woody debris and the composition of the riparian zone from forest to agricultural landscapes. Riparian buffer zones and stream structures like dead wood are considered as generally important structures for protection against an increasing amount of sediment particles in the water. Hence, in this study these structures were quantified in thirty different stream segments on land and in the water. To measure the transport of sediment Whitlock-Vibert boxes were used in three different types of landscapes; forest, transition and fields. The boxes were left in the stream segments for three months, the taken up and dried and weighed. The results showed that the transition-land in Frösvidalsån had the highest sediment transport. The second highest transport of sediment was in Blackstaån at the fields.

The mistakes and failures on the roof are noticed during inspection of the construction, many of the commentaries are recurring. A contractor should only need to get a commentary once and then learn from the mistake. It has in this study been brought to light that the solution is not to tell the contractors to "stop slattern", it is more complicated than that. Today, the biggest problems are found in leadership, communication, feedback of experience and that the entrepreneurs take too little responsibility.To minimize the amount of commentaries all contractors need to work with a clearer leadership where the leader is both respected and appreciated. The leader must in an effective way be able to convey all the information to all employees.

During whole-tree harvesting, there is a risk that the soil will become impoverished of nutrients. To prevent this, nutrients are returned to the harvested site as wood ash. This action also reduces the risk of soil acidification. Nevertheless, the ash does not result in any increase of tree growth if it is added on mineral soils, which is where the measure is most commonly used in Sweden. Due to the lack of growth response, the interest from landowners is small, which is why ash amendment today is not done enough to compensate for the need.

Construction and maintenance of forest truck roads are a necessary element of industrial forestry. Payment for contracting services in this context can be done according to a number of payment models. This study will focus on the methods and consequences associated with a change of Holmen Skog?s payment model from per hour to per metric ton for ballast hauling. The aim of this study is to improve the economic efficiency of Holmen Skog?s ballast hauling in construction and maintenance of forest truck roads. This is done by formulating and evaluating a proposal for a payment model based on crowns per ton.

Plant survival, plant damage and height growth were studied in nine wild cherry (Prunus avium L.) plantations in southern Sweden established between 2000 and 2002. All stands were located to the county of Småland. The survey was conducted during May and June in 2007. During the survey the height, diameter and quality of the cherry trees were recorded. In one stand, red ? berried Elder (Sambucus racemosa L.) was a dominant species.

The introduced lodgepole pine (Pinus contorta) occupies more than 650 000 hectares in Sweden. There are some differences between lodgepole pine and Scots pine (Pinus sylvestris) forests which could affect bird assemblages, for example differences in canopy density and ground vegetation. Birds were surveyed in 14 localities in northern Sweden, each characterized by one middle-aged stand of lodgepole pine next to a stand of Scots pine. The two paired stands in each locality were planted by the forestry company SCA at the same time and in similar environment to evaluate the potential of lodgepole pine in Sweden. In those 14 localities, one to three point count stations were established in both the lodgepole pine and the Scots pine stand, depending on the size of the area.

This thesis is about the effects of fertilizing and thinning on furniture timber from redwood. Interviews of furniture manufactures have been made and observing of timber from the Swedish fertilizing and thinning trails. The result from the interviews showed which properties that is important for the furniture manufactures and then the result from the observation showed which type of management of the forest that gave the most timber that had those properties. .

This thesis analyses the prerequisites, profitability and competitiveness of eucalyptus plantation on the Iberian Peninsula and in Brazil. The thesis has a macro perspective and analyses a typical hectare of eucalyptus in each studied region. A survey methodology was used as a strategy to cover a broad perspective using expert respondents. The regions studied on the Iberian Peninsula were the ones found suitable for eucalyptus plantations from an economic point of view. The studied regions were Huelva in the South West of Spain, Galicia in the North West of Spain and Portugal.

The construction industries are relatively conservative type of business that takes a longtime to adjust for new methods and embrace new ideas. It dose not matter if the newmethod seems to be an improved method as long as it is new and untried. Constructioncompanies are reluctant to change form a longtime working method to a relativelyunknown method.The purpose with our report is to perform an evaluation of BeWi construction method.Our goal are to present the generally opinion about BeWi from the contractors that hasbeen in contact/worked with the method. We also want to know from the contractor?spoint of view if BeWi and the method measure up to the standards that are presented byBeWi and if they believe that improvements need to be done.Our progress up to the final report has consisted of three parts[1]Field studies[2]Interviews[3]Literary studiesWe started out with field studies where we took notes and observed all the includedworking phases on the construction site when using the BeWi method.

This report is an assessment of the feasibility of using aerial photographs to estimate number of stems per hectare in young forest stands, used together with upper height to determine the need for pre-commercial thinning or ordinary thinning cutting. Aerial photo-interpretation was conducted in 2007 on assignment of Stora Enso Skog AB. A mean height function based on stand age produced with data from Bergvik Skog AB?s 2006 forest inventory assessment was used as a proxy for upper height and used together with photo-interpreted number of stems per hectare to determine the need for thinning cutting according to Bergvik Skog AB?s definitions. The test area is located north of Falun on Bergvik Skog AB?s land.Flight altitude was approximately 900 m above ground and the aerial photos were taken by L&L Flygbildteknik AB.

The storm Gudrun January 8-9 2005 felled about 70 millions cubic metres forest in southern Sweden. The majority of the wind damaged forest was spruce (Picea abies). In order to decrease the risk of wind damages in the future other trees species are of interest for forestry in southern Sweden. The purpose of this master thesis was to study if larch were more wind tolerant than spruce. The method was to compare larch, Japanese larch (Larix kaempferi Lamb.), European larch (L.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Sydved and the aim of the work was to investigate the economical output of removing understorey trees before first thinning. Four treatments were studied. - no cleaning before thinning - cleaning of all trees less than DBH 5 cm before thinning - cleaning of all trees less than DBH 7 cm before thinning - cleaning of all trees less then DBH 9 cm before thinning The result shows a decrease of the cost per m3 for the harvester with about 38% if all trees less than DBH 9 cm was cleaned before thinning compared with the un-cleaned area. At the same time the total net revenue increases with about 22%. .

Reindeer husbandry and Forestry are both area related industries and will in big extent use the same lands. Conflicts often arise because of that the industries have different interests. Many of the activities done by the forestry influences the reindeer husbandry in an undesirable way, simultaneously as the reindeer husbandry activities can have negative consequences for the forestry. One such forestry activity is fertilization. It was during the 1960´s forest fertilization began to be practiced and the reason was that the increase in growth that the fertilization gave could be able to cover for the future shortage in wood many feared. During the 1970´s when the fertilizing activities were most intensive about 200 000 ha was fertilized annually.

Since the 19th century the concentration of CO2 in the atmosphere hasincreased by 40 percent as an effect of the use of fossil energy sources.Increased concentration of CO2 will likely lead to increased temperature,changes in precipitation, rising sea level and increased frequency of extremeweather like storm events. A step to reduce emissions of CO2 and mitigateclimate change, for the property of Tagel, can be to adopt new silviculturalstrategies and analyse which is the most effective. As a result of that, threescenarios was produced, business-as-usual (BAU), increased set aside landand energy. An introduction of windpower at Tagels estate (property) andeffects on carbon balance was also examined. By using the Heureka systemand LCA-analysis in this study, it showed that the scenario of increased setaside land was the most efficient way to reduce carbon dioxide (CO2)emissions for the analysed period of 100 years.

This major project in Building Engineering has its focus on inquiring into what methods has been used in the planning process of the residential buildingLjusbojen 1. This project has been conducted in cooperation with Kadesjös Ingenjörsbyrå AB, an engineering contractor firm which also acts as the property developer. Initially several different general methods for planning residential buildings have been presented. After the methods from the process of building Ljusbojen 1 has been analyzed compared to the general methods presented in part 1. This shows what the determining factors are during the planning process; factors such as cost, quality, time management, know-how and environmental issues.