This thesis examines the tendering process from the point of view of Swedish building contractors. The purpose with the study is to chart the decision process for the contractors during the tendering process. The study is designed as a survey study. This made it possible to reach a wide base of respondents, not letting such factors as geography being an issue. The survey itself was characterised by a very high response rate compared to other similar studies. The result from this study shows that former experience from similar projects, current workload and the clients economic condition are very important factors for both whether or not the contractor will bid for a project as well as the cost estimation and tendering price. Former experience from similar projects is also an important factor for the determination of the indirect costs.

The following thesis is a study of the forest history on the island of Ängsön-Marskär concentrating on the last three hundred years. The island is located in the administrative province of Stockholm, the local community of Haninge and it is situated approximately seven kilometres east of the island Ornö in the south of the Stockholm archipelago. The questions this thesis attempts to answer are: How where the natural resources on Ängsön-Marskär used through the centuries? How has the state of the forests developed since the 16th century? How will the nature develop onwards? The thesis is based on archival sources for Ängsön-Marskär and the surrounding areas. A field study was conducted where the entire island was investigated using an objective forest inventory method. The first map material existing over Ängsön-Marskär is from the year 1711.

Sitka spruce (Picea sitchensis (Bong.) Carr) is just like Norway spruce (Picea abies) a species in thegenus picea. The natural range of Sitka spruce is a narrow strip along the west coast of North America. Itis the most coastal of all picea species, and very dependent on the mild and humid climate along thepacific coast.Sitka spruce has been grown a long time in the countries around the North Sea, particularly in GreatBritain where it currently is the most important species in British forestry. Sitka spruce has not beenplanted in Swedish forests to any large extent before the storm Gudrun in 2005. Several studies indicatethat the production of wood biomass is higher for Sitka spruce compared to Norway spruce.

Inspections within the building industry are surrounded by a rigorous set of rules presented in AB 04 and ABT 94. There are several types of inspections but the final inspection has the biggest legal implications and is important in many aspects, since it?s the one that ends the contract time for the contract i.e. when the contract is passed on from contractor to the client. It is also a confirmation on how the contract has been carried out and that the potential guarantee times after the contract will start to apply. The objective of the following report is to find out what different types of inspections there are as well as a legal understanding about what happens before, during and above all after the final inspection.

The Swedish building contractor JMRegion Öst would like to to investigatethe possibilities of developing andstreamlining the production of singlefamilyhouses. JM are producing singlefamilyhouses with prefabricated framesat a rate of about two houses per week.During construction, the different tasksare performed by JM?s own productionstaff but also by varioussubcontractors.When examining the schedules of recentlyproduced projects, it appears that allthe houses are more or less completedeight weeks before the customer moves into the house. During those eight weeksseveral operations are conducted such asinspections, installation of appliancesand cleaning procedures. The inspectionperiod constitutes between 25 and 35% ofthe complete construction period.By conducting interviews, it has beendiscovered that this final phase is anessential security buffer for delays anderrors that often occur.

Overdue cleanings have for a long time been an important topic of discussion within the forestry sector. When stands that have not been pre-commercially thinned are reaching the level of commercial thinning, many problems occur in terms of decision-making and economical outcomes. These types of stands are commonly known as conflict-stands. The work was carried out partly as an interview survey towards representatives from the forest sector and the energy sector, partly as a case study of conflict-stands situated in Böksholm, north of Växjö and in Tönnersjö east of Halmstad. The criteria for the studied stands were that they had to be dominated by Norway spruce and be in a severe status of ?conflict?. The aim of the interview was to get an overview of the situation today, and also analyse trends in terms of conflict stands.

The economic analysis of building contracts is an unexplored field within Law and Economics. This paper makes an attempt to cast some light over the subject and encourage to more research within the field. The main purpose has been to describe why the actual price in a public construction project often turns out to be higher than the contract price and offer a way of handle that risk. In the paper a model is set up that shows an optimal contract given expectations on actual price and gaps in contracts. Cost increases for the buyer can mainly be explained by two situations.

Title: Mountain birds ? a comparative study from valley to mountaintop in a northern and southern Swedish fjeld  Author: Kristian Zackrisson Abstract Main aim in this study was to increase the knowledge about birds in the Swedish mountain area. Three questions were asked: 1) Which bird species can be found during the breeding season along a low mountain slope from a forested valley to a mountaintop with bare mountain environment? 2) Do the number of species and individuals differ in different elevation zones? 3) Is the composition of bird species along a low mountain slope the same in the Kebnekaise mountains inLaplandand the Grövelsjön mountains in Dalarna? Bird census in two study sites located in the Kebnekaise mountains and the Grövelsjön mountains and subsequent analysis of the results from the bird census was the main parts in this study. Totally 20 bird species were found along a low mountain slope in the Kebnekaise mountains.

It is a well-known fact that textiles and carpets have benign sound-absorbing properties. It is desirable to have quantified values of these properties ? especially for architects and interior designers. They often need to be able to giveaccount for the acoustic properties of their designs at a relatively early stage and sometimes have strict acoustic classifications imposed upon them by their contractor. A product with documented acoustic properties would aid when prescribing interior elements.The purpose of this thesis is to develop a wall-mounted panel in hand-tufted material ? aesthetically pleasing and versatile but also having documented and quantified acoustic properties.

Lichens are adapted to bright and sparse forests on oligotrophic ground. Due to a slow growth rate and high light demand lichens will suffer from competition in eutrophic environments. Therefore, lichens have disappeared from managed forests where the forest industry has increased the productivity. A reduced abundance of lichens will affect both biodiversity of the forest and the reindeer winter graze lands. It is important to understand how and for how long fertilization affects the abundance and diversity of lichens in order to protect lichen rich ecosystems. We have registered the biomass and number of lichen species in eight plots (four nitrogen rich and four nitrogen deficient) and compared fertilized Sami settlements with their oligotrophic surroundings in the nature reserves of Tjeggelvas.

Since the beginning of the 1900s Sweden has had laws and rules governing the ownership of agricultural and forest land. The foundations of the current Land Ownership Law, ?Jordförvärvslagen 1979:230(JFL)?, are from 1979. The most recent review and adaptation of the law occurred in 2005. Its main purpose is to prevent a passive ownership of land in Sweden and to ensure that the land is actively worked.

The purpose of this report was to investigate to which extent local presence of large herbivore mammals (Alces alces, Cervus elaphus, Capreolus capreolus, Dama dama and Sus scrofa) covaries with small rodents (Myodes glaerolus, Apodemus flavicollis and Apodemus sylvaticus? The hypothesis was that high abundance of wild ungulates would inhibit the density of small forest rodents. The data was collected during field work within FoMA (Environmental Monitoring Assessment)/SLU (Swedish University of Agricultural Science). The Ungulate dropping inventory and rodent trappings, which is the base in this report, where performed 2012 ? 2014 in Gnesta/Nyköping municipalities (G/N) with a relatively high density of wild ungulates and Vetlanda/Växjö municipalities (V/V) with relatively lower wild ungulate density.

This exam paper has been a collaboration between the writers and SYSteam Utvecklingspartner in Huskvarna. The assignment was about finding a need for a mobile application, making a requirement specification document with design documents and parallel to this constructing a prototype. The assignment is summarized in the following questions:? How can companies in the forest industry benefit from mobile information technology?? How can a user centered perspective be used in the process of making the requirement specification document and the design documents?? How do guidelines for usability apply to a mobile application?Three visits to companies in the forest industry were made to find a need for mobile information technology solutions. After a small analysis of the different companies? problems and conditions the decision was to use Tenhults Impregneringsverk AB in the case study.We used the FA/SIM method in our job of finding the organization needs for change and the principles of User Centered Design in the work of constructing a prototype.The result of our work is a requirement specification with design documents and a prototype.

The purpose of this study is to seek answers to an ongoing problem in the forest sector; why scarifying operators quit their job. Scarification quality is crucial for successful reforestation after clear felling. It is therefore important to keep good operators working in the business. To collect the desirable information interviews were made both with contractors who are working and operators who have stopped working with scarifying. The conclusion one can draw from this report is that the scarifying operator job needs improvement in multiple areas. The former operators are mostly dissatisfied with the stress, low wages and negative physical effects that this work brings..

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.