In this study, the pre-tension force in an insert screw connection are examined in order to establish a greater understanding of the system and to facilitate the process of making new metal cutting tools. Certain especially significant design variables such as the offset, the length of the contact thread and the shank length above the threaded hole, are selected to be closely examined. A comparison of the influence on the pre-tension force between threaded holes made with a worn, versus new, threading tool is also involved in the experiment. The study is limited to handling the screw sizes M2,5 and M3,5. The results show that a regression model, with good approximation, can be fitted to the measured values.

Syftet med uppsatsen är att jämföra hur grunderna för ansvarsfrihet från skadestånd vid fullgörelsehinder är uppbyggda i olika normsystem för att utifrån en komparativ analys komma fram till vilket system som är bäst tillämpbart i en situation liknande den i scenariot med den försenade vaccinleveransen som jag beskrivit i inledningen till uppsatsen.De regler jag valt att studera för en komparativ jämförelse är kontrollansvaret i den svenska köplagen 27 § och CISG art. 79, modellagarna PECL och Unidroit Principles regler om force majeure och hardship, standardklausulerna i ICC 2003 Force Majeure and Hardship Clauses samt den engelska läran om frustration. Att jag valt att studera teorin om hardship beror på att teorin är starkt sammankopplad till reglerna om force majeure och kontrollansvar. Jag har valt PECL och UNIDROIT som exempel på hur modellagar kan vara upplagda. Fler modellagar och principer finns.

This thesis provides a comparison of the old Planning and Building act (PBA) from 1987 with the new PBA, which entered into force in May 2011. The essay consists of a descriptive part that presents the regulation of both laws. The new PBA consists of several differences compared to previous regulation. This thesis will, however, primarily be centred around the regulation regarding building permit appeals and the possibility of building permit, to gain legal force.In the old PBL, there were no regulations that result in a building permit decision could be made effective. Instead, a building permit could, long after the decision had been made, be over-challenged.

This report analyzes disposable packaging and returnable packaging with the methods life cycle analysis and life cycle costs analysis. These two different packaging are analyzed through the company Clas Ohlson?s packaging-flow. To get a picture of how the flow works, a visit at the company and email contact have been done with Clas Ohlson to get relevant informationToday Clas Ohlson has a big flow of articles to the stores without larger variations in the demand, with the exception of autumn, which is when customers start shopping for Christmas. Clas Ohlson?s articles are placed on a pallet and are wrapped into plastic-film for protection and to make sure that nothing will be stolen.

the most obvious problem at Traction today is the in-between handling that demands much time and resources. The reason is that the packages are not designed with handling in mind. Several of the packages of today also have a poor degree of utilization that means there is room for a fewer number of articles. That in turn means more packages, more transports, more storage space and more staff. On the basis of a specification of demands ? which take quality and environmental influence, as well as transport, handling and economy in account ? we have developed suggestions on new packages that will facilitate handling and lower the total costs, The time of handling will in some cases abbreviate to just a few seconds with the new packages.

?Optimizing the workflow of hydraulic reservoir tanks? is a degree project made by Jonas Olsson, student within the faculty of technology and science, during spring semester 2012. The project comprise 22,5 ECTS.Volvo Construction Equipment, located in Arvika, was the client in this project. The mentor at Volvo CE was A?sa Barck, and the mentor at Karlstad University was Monica Jakobsson.

This thesis was performed at Vendig AB which is a company that develops and sells products such as belt scrapers for conveyor. The thesis is divided into two parts, one part where it´s investigated which tension force is required to tighten Vendig AB´s scraper Hampus against the belt in a correct way. The second part is called mechanical design and here a new and more compact tension device is developed.Field studies has been conducted at a couple of Vendig AB´s costumers to get a knowledge base about how Vendig AB´s products are used, how they function and the environment they operate in. During one of the field studies the force between the scraper and the belt was measured. The result from the measurements, together with a report from LKAB [1], were evaluated and summarized in a table.

The purpose of this thesis is to provide a better understanding of how dairies use colour, picture and shape in order to influence customers? buying decisions of fruit yoghurt. In order to reach this purpose the research was conducted through case studies of three dairies. In this research three research questions were created with focus on the visual elements colour, picture and shape. The method of data collection was performed through interviews with dairies as well as documentations.

24 mars 1999 påbörjar NATO för första gången i organisationens historia krigshandlingar med luftstridskrafter. Detta mot ett Serbien med Slobodan Milosevic i spetsen som utförde etniska rensningar på kosovoalbaner i Kosovo. Denna konflikt kom att från NATOs håll kallas operation Allied Force. Tre år innan denna konflikt urartade släppte Dr. Robert A.

The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.

The purpose of the thesis is to compare Sweden's and Great Britain's total costs for their systems regulating producer responsibility for waste packages. Producer resonsibility is a strategy implying that producers are responsible for their waste also after its use. Sweden and Great Britain introduced different systems systems after an EU directive was adopted in 1994 (94/62/EC), and they have resulted in entirely different recycling levels in the two countries. In the Swedish system, responsibility has been delegated to the industry who are responsible for reaching the determined goals. The economic instrument used is a fee, set and managed by the industry. The British system is more centrilised, and the economic instrument used to finance recycling of waste is a system based on transferable permits. The thesis compares the four different alternatives: delegated and centralised methods, and fees and transferable permits analytically.

This study draws from Zygmunt Bauman´s theory that a governmental policy of values can reduce the personal responsibility and moral choices for employees, to focus only on maintaining the government?s internal rules and regulations. The apparent risk with this type of moral attenuation is that the employee is deprived of the possibility to react morally on conduct of the government?s external misuse of power. In this study, this theory is connected to the Swedish Armed Forces? policy of values, as these values do not include a critical standpoint for officers and soldiers.

Heavy duty vehicles often have problems with traction during the winter periods. For vehicles that can lift tag axles it is possible to increase the normal force on the driven axle by lifting one or more tag axles, this will then increase the propulsive force of friction. This however increases wear on both road and vehicle. A possibility to reduce the wear while achieving nearly equivalent traction compared to lifted tag axles is to allow the vehicle to regulate the normal force by lowering the pressure in the air suspension associated with the tag axles or by the lifting of these axles. The vehicle would then by itself be able to set just the right amount of normal force on the drive wheels to avoid unnecessarily high normal forces while maintaining sufficient traction.The purpose of the report is to find out which parameters affect heavy duty vehicles when driving on slippery slopes and how traction can be improved.

What happens when employees within the police-force make mistakes in their line of duty? This essay set out to investigate the relationship between labour law sanctions and the criminal law punishments for wrongful acts for government employees. This relationship is also set in the perspective of how acts or statements of xenophobia are handled within the Swedish police-force. Further, the essay aims to examine the principle of ne bis in idem in relation to labour law sanctions and criminal law punishment for wrongful acts, and if these two should be considered in line with this principle. Regarding the relationship between labour law sanctions and criminal law punishment for government employees, the determination for which system to use in any given situation is not fully stipulated.

SCA Packaging AB i Munksund Piteå är ett pappersbruk som tillverkar kraftliner. De har för en tid sedan inlett ett arbete för att utforma en inköpsstrategi. Arbetet gick ut på att utveckla en strategisk samsyn för inköpsverksamheten som ska vara genomgående för hela SCA Packaging Munksund. Syftet med arbetet var att skapa en gemensam bild av inköp i företaget med såväl brister som förbättringsmöjligheter. Ämnen som togs upp på möten angående inköpen på företaget var bland annat avtalshantering, avtalstyper och klassificering av inköp med hjälp av en positioneringsmatris i detta fall Kraljics matris.