This master thesis aims to investigate and quantify the potential associated with increasing the usage of edible by-products as food for human consumption on the Swedish market. The main emphasis is on the Swedish production of offal and the obstacles that currently inhibit greater usage of these products as foods.The results indicate that the Swedish market for offal is limited. Only a small amount of the edible by-products that are produced in Sweden every year are consumed as foods and a considerable amount seem to be downgraded into animal feed or thrown away. The utilization of these products is restricted by economical, technical, legal, and cultural factors that all need to be taken into consideration. On the whole, large-scale slaughter plants seem to be more inclined to utilize these products effectively, as the profit from doing so increases proportionately to the produced volumes.

In 2013 a new emission standard for heavy trucks was introduced and hence a number of new parts was brought in to Scania CV AB. This created a need for modifications in the silencers flow. The flow is highly complex involving several suppliers, call off methods and different models of silencers. The aim for this project was to improve the existing silencers flow. The flow, from supplier to assembling, has therefore been mapped.

Water is an important food and an important natural resource. In order to protect these are the Environmental Code and the EU directive given to water protection and related water protection regulations will be established for all water sources until 2010. Those who will prepare a water protection and related water protection regulations is the municipality or person responsible for water supply. The person then decides and declares the area as water protection and related water protection regulations are municipal or provincial government. The idea of creating a water protection is to protect the water supply and the body of water against pollution caused by point sources, diffuse sources and accidents combined.

Rapporten behandlar framtagandet av en produktutvecklingsmetod för industriellt restmaterial. Studien har gjorts på uppdrag av Creatables som är ett projekt inom företaget KAAV AB.Creatables arbetar med att ta fram konsumentprodukter genom att ta tillvara och förädla restmaterial från industrin, därav deras slogan Made from Waste.Dagens konsumtionssamhälle förbrukar mycket av jordens resurser och det krävs en effektivisering i utnyttjandet av dessa för att säkra tillgångar för framtida generationer. Creatables är ett ungt projekt med små resurser och således har syftet med examensarbetet varit att ta fram en ny produktutvecklingsmetod för Creatables anpassad till deras arbetssätt och storlek.För att utreda uppgiften har arbetet delats in i två delar som sedan utvecklats parallellt med varandra. En produktutvecklingsmetod och ett flertal produkter av restmaterial har arbetets fram.Litteraturstudier, intervjuer och studiebesök har genomförts för att bygga en grund för resultatet att stå på. Tidigare publicerade teorier om produktutveckling har studerats och informationen och resultaten från dessa har i kombination med produktutvecklingsarbetet använts för att ta fram en produktutvecklingsmetod som passar Creatables.Resultatet är indelat i tre huvudområden.

Clostridium difficile is a pathogen for both humans and animals and is often associated with antibiotic-associated diarrhea. Recently, several human cases of C. difficile-infection with increased mortality and morbidity have been reported. In studies performed in different countries C. difficile has been found in meat.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

Svensk Växtkraft is the owner of the biogas plant in Västerås. The company is planning to increase their treatment capacity at their biogas plant. In connection to this work it is also possible to make some energy saving changes to the biogas plant. The objective of this study was therefore to make an electricity and heat survey of the biogas plant, a detailed study of the heat consumption in the sanitation step and also a comparison of energy consumption with the present sanitation method and an alternative strategy where the waste is treated in 55 °C during 10 hours (the current method is heating to 70 °C during 1 hour). The energy survey was conducted in close collaboration with staff at the biogas plant. The current during normal operation was measured, power was calculated and multiplied by the time of usage to obtain the energy consumed.

Background The usage of Nutrition supplement in the elderly care is commonly occurring and plays an important role in the intake of nutrition for the elderly. The usage of nutrition supplement is to reduce malnutrition within elderly care. For the elderly it is crucial to keep a healthy diet and to never lose weight. The loss of weight can be very dangerous it could even be fatal for the aged and should therefore be avoided. To have a diet that is rich in energy such as enriched meals prevents the elderly from receiving a shortage of calories since the diet is rich in fat, protein and thus also rich in energy.

Syfte: Undersöka möjliga metoder till att finna matglädje vid ätstörningar samt undersöka hur användbara dessa metoder kan vara för människor med ätstörningar både i och utanför behandling.Bakgrund: Ätstörningar är ett växande folkhälsoproblem och ett område där det krävs mer uppmärksamhet och forskning för att öka förståelsen och kunskapen av ätstörningar, samt även för att kunna öka förebyggandet och behandling av dessa sjukdomar. Denna uppsats inriktar sig på ätstörningar och matglädje. Det är oerhört viktigt att hitta glädjen för mat när man har en ätstörning för att kunna nå ett friskare liv och ett friskare tänkesätt kring mat och sin egen kropp. Denna uppsats har undersökt möjliga metoder som kan användas för att hjälpa människor med ätstörningar att finna matglädje. En studie har genomförts på Capio Anorexi Center i Malmö som fokuserade på hur personalen arbetar för att hjälpa patienter att finna glädje för mat under behandling, samt hur de arbetar för att förmedla mat på ett positivt sätt för sina patienter.Metod: Litteraturstudier genomfördes både innan och efter undersökningen på Capio Anorexi Center.

Animal welfare is impaired if the diet does not provide sufficient feeling of satiety or the ability to perform natural feeding behavior. Pigs are omnivores and spend most of the day searching for food by rooting, grazing and chewing. Both inability to perform foraging behavior and insufficient feeling of satiety often leads to direction of foraging behavior towards stereotyped and abnormal oral behavior. Dry sows are often fed restrictively which leads to unsatisfied feeling of hunger. Dietary fiber has been found to reduce stereotypic and abnormal behavior as well as aggression, which could indicate that pigs need to forage has been met giving a feeling of satiety.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area. The results show that use of locally installed renewable energy sources can reduce the total climate impact when life cycle perspective is applied.

Följande uppsats tar sin utgångspunkt ur den rådande situationen i Adenviken som präglas av illegal piratverksamhet. Adenviken med dess särskilda karaktäristik granskas i syfte att undersöka om det av militärteoretiker formulerade begreppet ?Fourth Generation Warfare? i någon mån är applicerbart på situationen. I syfte att svara upp mot uppsatsens frågeställning avhandlas begreppet 4 GW och dess historik, innebörd samt utveckling. Den empiriska delen av uppsatsen behandlar Adenviken och fokuserar på situationen i landet Somalia med dess pirater och deras illegala verksamhet.

Syftet med examensarbetet var att studera produkten ?Hummus original?, kikärtsröra, frånföretaget Maxo´s Food AB. Önskemål från företaget och konsumenter var att kunna ta bort ettav de båda konserveringsmedlen, E211 och E202, i produkten. Konserveringsmedlen kanframkalla allergireaktioner, och speciellt konserveringsmedlet E211 kan framkalla reaktionerhos personer som är överkänsliga mot acetylsalicinsyra. Företagets HACCP-plan studeradesockså för att se om något under tillverkningen kunde kontaminera produkten.Prover togs på kikärtor från leverantör 1 och leverantör 2.

The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.