A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

The project Design analysis and proposals of plastic screw caps in Australia was performed at Högskolan Dalarna incooperation with University of Western Sydney, Australia. The Swedish company Tetra Pak, in Lund, were assigner forthe project that was performed 2006-2007. The commission was to do a survey about the packages for non-carbonateddrinks in Australia. The bottles had to be plastic, able to open in one step and with focus on the caps.The project has result in design analysis and a new proposal of a plastic screw cap for the Australian market. Sixbottles were choosen and they were all testet on 20 consumers each with a Likert-scale test.

AbstractAim: The purpose of this thesis is to research how women think about fashion in relation to their self and to others. Can clothes be an expression of who we are who we want to be and how we look at others? What are the main characteristics in this type of communication and what kind of information can be distributed using this tool?Method/Material: InterviewsMain results: Clothes can work as a tool to show who we are and what we are, mainly on short term. We use clothes for different purposes, sometimes we what to be seen and really show who we are and what we stand for and sometimes we just what to go with the flow and not be seen at all. We will always have a physical need for clothes but it is also a natural and important part of our individual expression and our identity.Keywords: Fashion, Clothes, Identity, Lifestyle.

During the work at Gateway Security AB in Motala I began examining available antenna models to get a wider perspective, this have given knowledge of their structure, and an understanding of their function. All my necessary fact is based on my observations and notes of these measurings. New antenna models, and available models were examined where measurements at different heights and different distances on the antenna were performed with the help of an oscilloscope and a measure probe, peak ? to - peak was brought on the signal. The measurements are presented in a line diagram.

Nyckelord: Kassaflödesanalys, kassaflöde, likviditetsplanering, likviditetsbudget, likviditetsprognos, likviditet och nyckeltal.Frågeställning: Hur och varför använder de fyra valda organisationerna kassaflödesanalyser och -prognoser internt?Vilka är skillnaderna i de fyra organisationernas sätt att ställa upp och använda sig av kassaflödesanalyserna och -prognoserna och beror skillnaderna på i vilken bransch de verkar?Syfte: Syftet med uppsatsen är att undersöka hur kassaflödesanalyser och -prognoser tillämpas praktiskt i de fyra stora organisationerna ABB, Västerås stad, Manpower och Gina Tricot för att identifiera om skillnader i uppförandet finns.Metod: Studien är av kvalitativ karaktär då fallstudierna av organisationerna gjordes genom intervjuer med representanter på respektive organisation. Totalt genomfördes elva intervjuer med tolv personer. Data till referensramen samlades in genom sekundära källor. Insamlad data och information analyserades där referensram och empiri sattes i relation till varandra.Slutsats: Brister i metoden för hur kassaflödesanalysen ska upprättas finns då den i praktiken inte används av de undersökta organisationerna internt.

Forest enterprises have always searched for ways to improve efficiency. For the past few years there has been an emphasis on stock-keeping levels. Increased demand for fresh round timber and the need to decrease the amount of tied-up capital has made the forest industry reduce its inventory levels. This has brought on a higher demand on the timber supply from the forest management districts concerning both delivery in time and assortment output. As a result, the flow of timber has fluctuated a lot with serious consequence for the timber supply during 1994.

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

Electronic article surveillance (EAS) is widely used in shops and libraries together with an RF-tag attached to the goods or books in order to prevent shoplifting. By implementing the addition of a moisture sensor to the RF-tag, other functions become possible, including the ability to use as an alarm with regards to frozen goods, which have been shipped but which have melted and have, subsequently, refrozen. In- relation to care for the elderly, one time-consuming step involves checking whether there is the necessity for a change of diaper and this can, instead, be based on an RF-tag with an EAS-system alarm. A preliminary investigation was made using the moisture sensors, which involved how the resistance changes when liquid and/or heat is applied. A simulation of the LCCR circuit (RF-tag with the sensor) was conducted in order to determine how the resonance frequency changes for different resistances levels.

The focus of this project has been on the drainage tank of the reheater on Ringhals 1. This tank has on two previous occasions received such a high water level that the system automatically emergency stopped. For this reason, events and various readings from these two occasions has been specifically studied and analyzed. In order to prove theories about what causes these problems a model of the system was created in the program Dymola. Using simulation results from the model, we have been able to demonstrate how the system's measured values should look likeunder normal conditions with respect to flows, pressures, temperatures, valve positions and water level in the drainage tank.

This case study is performed within the production of Sherwin-Williams, Bellö. The purpose is to increase the understanding how a value stream can function more efficient, from a lead time perspective. With the analytical model that is build up on known theories, the purpose have been fulfilled. Mapping of value and non value time for four products thru their respectively process reveals wastes, which is, waiting, transport and movement, incorrect processing and set-up time that in it self create transport and movement. Thru identified wastes that causes loss in lead time suggestions of improvement has been proposed.

Att beskriva en byggnad som tidlös är bland det finaste en kan säga. Några av världens mest uppskattade byggnader har beskriv- its som just det, tidlösa. Hur kommer det sig att en av den finaste komplimangen och erkännandet en byggnad kan få, egentligen är intetsägande? Tiden går ständigt och det finns ingenting någon kan göra för att ändra det. Människor, djur och även byggnader utvecklas och åldras.

Wireless sensor networks have the potential for becoming a huge market. Ericsson predicts 50 billion devices interconnected to the Internet by the year 2020. Before that, the devices must be made to be able to withstand years of usage without having to change power source as that would be too costly. These devices are typically small, inexpensive and severally resource constrained. Communication is mainly wireless, and the wireless transceiver on the node is typically the most power hungry component.

Purpose: The purpose of this essay is to apply "Discount Dividend model" and "Discounted Cash Flow model" in reality during periods of economic boom alternatively recession.Method: A quantitative research method as well as secondary data and data collection method is used. This data consists of the company?s annual reports. Totally, 20 companies of different sizes under diverse economic conditions are involved in this data.Conclusion: After reviewing the companies? calculations, it is noted that the both models that are used reflect better stock-exchange rate during an economic recession..

The purpose of this thesis was to describe how service producing IT- companies handles their internal marketing. We wanted to understand how management deal with internal marketing activities and how different companies create a working environment to encourage employees to motivation and well-being. To be able to find out we did a case study on a service producing IT-company. Two personal interviews were done with two of the managers. Our empirical research showed that the company used internal marketing on a daily basis.

Due to increasing product availability and higher demands on fast deliveries, the competition between companies is growing. To be able to satisfy the customers? requests an efficient logistics system with short throughput time is required. By using tools associated with Lean production companies are able to make great improvements in their manufacturing systems and reduce lead times to satisfy customer demands.There are two classifications associated with manufacturing, high variety and low volume (HVLV) and low volume and high variety (LVHV). The general belief is that the concept of Lean production is difficult to implement in a production environment with high variety and low volume due to the concept being adapted to mass production.