Sök:

Sökresultat:

1163 Uppsatser om Flow modelling - Sida 5 av 78

Är Lerbodaälven verkligen en problemälv? : undersökning av fosforhalter

Lerbodaälven is a river in the municipality of Kil which, due to high phosphorus content is not meeting the requirements for good ecological status according to the Water Framework Directive. The purpose of this report is to investigate the causes for the high content of phosphorus that has been measured in Lerbodaälven between 1995-2010. Four questions will be answered in this report. 1. Does the sewage treatment work affect the phosphorus level in Lerbodaälven? The result from the time series analysis shows that the sewage treatment works have a small impact on the phosphorus level in Lerbodaälven.

Den moderna kommunikationen : En rapport om instant messaging och hur det används av unga vuxna studenter.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

Flödesoptimering på sjukhuslaboratorium: En praktisk implementering av lean

This study has investigated the possibilities of implementing lean in a division of a hospital in Stockholm. The goal was to reduce the lead time for the patient to get his diagnose by implementing lean in the two production flows of this division. In order to accomplish it, a complete map over the value stream has been done. With the help of the value stream map and lean theory a list over the processes in contradiction with lean has been made. Finally propositions to implement lean and by this way reduce the lead times in this stream have been made out.

ITS under byggtid - utvärdering med dynameq : Fallstudie: Intunnling av E4/E20 Tomteboda - Haga södra

Essingeleden in Stockholm is the most heavily congested road segment in Scandinavia and it is ofgreat importance for as well traffic within the city as for transit traffic. The capacity of Essingeledenand Norra Länken is not enough to accommodate all traffic. At times it is not moving at all, whichresults in long queues and an augmented risk of accidents. Consequently measures for increasing thecapacity on E4/E20, which will reduce congestion and the risk of accidents, are implemented byTrafikverket. In fall 2012 one lane of three at Pampas will be closed and so will the exit fromEssingeleden to Norra Stationsgatan, called Parkeringsbron.

Avancerad scenarioanalys för ambulansplanering

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

Redovisningens värderelevans av fritt kassaflöde : för den svenska aktiemarknaden

Problem: Is the free cash flow a value relevant accounting measure in relation to the Swedish stock market?Objective: The aim is that by using an investment strategy to examine whether the free cash flow is an accounting measure that could be perceived as value relevant in relation to the Swedish stock market.Method: The paper is based on a quantitative survey of empirical evidence that has been collected from companies listed on the Large and Mid-Cap lists of the Swedish stock market.Theoretical Frame of reference: value relevance, cash flow, portfolio theory, drive theoryResults: It was concluded that the study results conform to the Finnish survey results. The portfolio shows higher returns than the OMX index..

Reducering av ledtid genom en värdeflödesanalys En fallstudie på Lammhults Möbel AB

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

Modellbygge och regulatordesign av tröghetsmomentsimulator tillreferenssystem för stridsvagn 122

This master thesis holds a modelling in Simulink for a physical model of a main battletank tower, a three-phase induction motor and some mechanics. The aim of this work is to connect an earlier project at AerotechTelub, named StabSim to another called Eldris. In StabSim it has been made a Simulink model of the align and stabilisation system in a main battle tank 122 and in Eldris it has been build a physical model of a main battle tank tower. In this thesis the models that differs between Eldris and a real tower is changed in StabSim, and the parts that only exist in Eldris is added, for example a torque generating system which purpose is to make the model to behave like a real tower in control application, although it only has half the inertia as a real tower. The thesis even includes proposing a calculation of the torque that the torque generating system will actuate at the model..

Vad behöver en speldesigner tänka på vid utvecklingen och analys av ett implementationsförslag till ett spelgränssnitt?

Denna reflexiva rapport undersöker processen att utveckla ett implementationsförslag för ett användargränssnitt till ett spel som ska lära ut riskhantering till körskoleelever. Den reflexiva rapporten genomför också en analys av användargränssnittet och innehåller därför en kort genomgång av riktlinjer och gränssnittsprinciper från människa-datorinteraktion (MDI) samt teorin om Flow. Den reflexiva rapporten avslutas med en utvärdering av arbetsprocessen och lärdomar kring arbetet. Slutsatsen som dras är att riktlinjer och principer från MDI samt Flow inte alltid kan appliceras på ett gränssnitt i ett sådant tidigt utvecklingsskede men en designer kan fortfarande få mycket användbara reslutat av att göra en analys..

Hur bestraffningstyp påverkar flow

Syftet med detta arbete är att undersöka hur olika implementeringar av Juuls uppdelning av bestraffningstyper kan påverka möjligheten för spelare att hamna i tillståndet som Csikszentmihalyi identifierade som flow. För att undersöka påverkan av olika bestraffningstyper på spelares upplevelse skapades tre olika versioner av ett plattformsspel med olika implementationer av bestraffningstyper baserade på Juuls uppdelning av bestraffningstyper. Ett antal respondenter fick spela alla tre versioner för att därefter, via semi-strukturerade intervjuer, försöka förmedla hur deras upplevelse varierade från en version till en annan. Undersökningsdeltagarna observerades under spelning för att försöka fånga spår av flow-tillståndet i deras kroppsspråk. Även deras prestation i varje spelsession lagrades för att möjliggöra en jämförelse av spelversionerna.

Kadmium i skånska vattendrag : en metodstudie i föroreningsmodellering

Modelling of pollutants is commonly used in research and at departments working with environmental issues. The need to use large amounts of data when modelling creates the opportunity for more generalised models with lower data demands. Aggregating functions into coarser elements is a sort of generalisation of actual features in nature.A development of a method and a modelling tool called ?KadmiumKalkylatorn? has been performed to model cadmium pollution in rivers in Skåne, Sweden. The water runoff has been multiplied with cadmium standard concentrations based on membership in landuse classes.

Flödesmätning i vattenkraftverk : Studie av alternativa mätmetoder

Flow measurement is one of the greatest challenges in order to calculate efficiency in hydropower. Most hydropower plants in Sweden use differential pressure methods for flow measurement. These methods are dependent on constant conditions in the waterways. A change in these conditions, like turbine improvements, prevents differential pressure methods to verify efficiency improvements. Since efficiency improvements can?t be verified by one measurement system, another method, which isn?t affected by changing conditions, can be used.

Viktiga faktorer för Kommunikations- och Informationsflöden inom projekt

  iiiAbstract?We are living in a time of project. Everything becomes project. All development, all efficient,all changes are running as project?.

Nitrogen flow in Scania : substance flow analysis on a regional level

In this thesis, the flows of reactive nitrogen (Nr) in Scania were investigated and quantified. The thesis was also intended to form a basis for comparison between the urban nitrogen flow and other flows of nitrogen within Scania. The management of nitrogen in society has disturbed the natural nitrogen cycle. This is linked to a series of environmental problems such as eutrophication, acidification, global warming and smog. The method used was Substance Flow Analysis (SFA) for Nr. For calculation and flow charts Scania was divided into three subsystems; air, water and society.

Förstudie till våtmark i Rimbo : Design för optimal hydrologi och kväverening

The euthropthication of the Baltic Sea is a threat that is beginning to be taken seriously by the governments concerned. In Sweden, regulations concerning the allowed nitrogen (N) concentration in the effluent water from wastewater treatment plants are being tightened up. The Rimbo wastewater treatment plant has been imposed to reduce the annual mean concentration of total N in the effluent water to levels below 15 mg l-1. A more and more common way to reduce the nitrogen level in wastewater is to let the water pass through a wetland. This study investigates the possibility to build this kind of wetland at the outlet of the Rimbo wastewater treatment plant.A prestudy of the topography, soil characteristics and groundwater flow indicates that the land area in question is well suited for the construction of a wetland.

<- Föregående sida 5 Nästa sida ->