The goal of this study is to examine what five teacher?s impression of the teacher?s role is in their previous years. How important the ?joy at work? is in relation with the educational progress? And what aspects that contributes to the? joy at work? and what obstacles that stops them. The essay will also go through the concepts of a teacher role, with connection to the theoretical perspectives of Csikszentmihalyi?s Flow and Antonovsky?s Salutogenesis (KASAM).The method I used was interviewing five teachers and I used Larsen?s chapter of ?content analysis? as a basis, I also used Flow and KASAM as theoretical references in my analysis.

Syftet med detta arbete är att simulera ett värmesystem i COMSOL Multiphysics, Pipe Flow Module, Non-Isothermal Pipe Flow som innehåller ekvationer och randvillkor för att modellera inkompressibel strömning och värmeöverföring i rör.Data om processen och dess komponenter har samlats in från industrin där arbetet är utfört och i vissa fall modifierats för att bättre beskrivas i programmet.Utifrån insamlad data har en modell byggts upp och två simuleringar har gjorts. En stationär för starten av systemet, den har sedan legat till grund för en dynamisk som simulerar förloppet från start till normaldrift.Tiden det tar för det aktuella fallet att nå drifttemperatur är 16 timmar. En felströmning upptäcktes samt att en av pumparna inte kommer att klara en start från 20 °C..

Background: Today there are high claims on organizations to show a positive economic view. To satisfy the demands and expectations from interested parties it is very important to carefully plan the companies tied up capital and cash flows. Purpose: The purpose with the thesis is to describe what actions organizations take to resolve the conflict between showing a positive cash flow and the need to tie up capital.The purpose is also to explain the different factors that must be considered when making decisions regarding cash flow and capital tied up. Method: A qualitative study of the actions and factors wich must be considered when decisions in swedish construction companies are made regarding cash flow and capital tied up. Results: A model of the factors and actions that affect cash flow and capital tied up in projects.

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

In a time when milk producing farm businesses face decline in profitability it is of great importance to examine how the situation can be improved. This thesis is a study off efficiency in milk producing farm businesses represented by Swedish, Dutch and German farms. The aim of this study is to investigate whether any differences exist between companies in these countries. Moreover, the study includes a mapping of a number of factors that determine how efficient milk production can be managed. This mapping is based on a literature review on prior efficiency studies followed by qualitative interviews with milk production advisors as well as a questionnaire sent out to dairy farmers in Sweden.

This thesis investigates how the level of implementation of New Public Management affects an organization?s efficiency. According to theory, a high level of implementation leads to a more efficient organization. This thesis is based on two case studies conducted on two units within Stockholms Stad. One of the units shows a high level of implementation of NPM and a high level of efficiency.

Hur kan svårighetsprogression användas i skapandet av Puzzlehunts med syfte att uppnå en ökad upplevd känsla av flow hos spelaren? Denna frågeställning behandlas i uppsatsen och problemet som måste lösas är hur man kan bygga upp en ackumulerad kunskap om något vars syfte är att hela tiden tvinga dig att hitta nya lösningar på problem. I mer traditionella spel kan upprepning lära spelaren hur spelmekaniken fungerar. I puzzlehunts kan upprepning av spelmekanik inte användas eftersom målet för varje pussel är att hitta mekaniken som löser problemet. Uppsatsen visar att man genom inlärning av hur man skall tänka för att hitta lösningarna till pusslen kan bygga upp en ackumulerad kunskap hos spelaren och därmed även ha en svårighetsprogression och öka upplevd nivå av flow hos spelaren..

Tidigare studier har visat att faktorerna KASAM, flow samt prestationsbehov har betydelse för hög upplevd arbetstillfredsställelse. I denna studie undersöks om dessa faktorer även är aktuella under svenska förhållanden. En enkätundersökning genomfördes på 137 anställda på tre olika företag för att mäta om de tre faktorerna kan predicera arbetstillfredsställelse. Resultatet visade att KASAM, och särskilt komponenten meningsfullhet, var en stark prediktor av arbets-tillfredsställelse. Även flow, och särskilt dimensionen inomboende arbetsmotivation, hade ett signifikant prediktionsvärde medan det visade sig att prestationsbehov inte predicerade arbetstillfredsställelse.

Purpose: The purpose of this thesis is to investigate potential associations between usage of the cash flow statement report and time perspective in which companies? acts and set goals. Method: Our approach is quantitative, using empirical data summarized in a statistical procedure. The result is thereafter analysed through the developed analysis model from which conclusion is drawn. Results: We have in the investigation stated that the usage of the cash flow statement report varies depending on the time perspective in which companies? acts.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.

The objective of this study is to determine if and how Swedish businesses measure the efficiency of their purchasing departments.In this study I have interviewed six medium to large successful companies and asked them· Which ratios they use to measure the efficiency of their purchasing departments· Why they use these ratios and· How the results of these measurements are usedI can conclude that although there are no ratios or other measurements that directly measure the efficiency of purchasing indirect measures do exist.The measures applied are usually the result of demands from management and the results are reported back to management and used to follow development within a particular field of purchasing. Benchmarking, especially external benchmarking, is unusual..

In this thesis a possible cost effective runner change of some of the units in the hydroelectric power station Olidan is investigated. The possibility to drive a unit at the same efficiency point through a change of the turbine shaft speed and the rate of discharge is tested. Furthermore the theories behind model testing, determination of efficiency increase from model to prototype and efficiency measurements shall be discussed and analyzed with Olidan as a starting point.A predicted curve has been built on information from model tests and field measurements on the existing runners and runner data from the test of the new model. The predicted curve shows the difference in efficiency between an existing runner and a modern one. It is the difference in efficiency that is used in the calculations that are to show whether changing to a pair of new runners will be cost effective or not.

We were commissioned by Bulten Stainless AB to identify and analyze their customer order flow. Because the company had problems with delays in the production and deliveries to the customer, the task also included investigation of how the company work with prevention and management of delays. The purpose of the project also included to identify critical factors for effective order flow in smaller workshop companies.The information about the flow and how the work takes place within the company were collected through observations on the company and interviews with the staff. This information was used to draw maps over the customer order flow and to write a description of the current situation within the company. Both strengths and weaknesses of the companies work could be identified through analysis of the present situation.

This quantitative study explores how employee perceived efficiency within customer service is affected by standardized routines, digital tools, and motivational factors. The study is based on survey data collected from 42 employees across five customer service departments in a larger organization. The theoretical foundation integrates Weber?s bureaucracy theory, the Technology Acceptance Model (TAM), and the Job Characteristics Model (JCM), allowing for a multidimensional analysis to capture the employees' experiences of efficiency. Findings reveal a statistically significant positive relationship between perceived efficiency and both standardized routines and perceived digital tool usefulness and ease of use. Furthermore, the study identifies that skill variety and task significance are positively correlated with experienced meaningfulness, which indicates a potential mediating relationship between these motivational aspects and perceived efficiency.

The purpose of this project is to study Partab's material distribution process, furthermore identify critical problem areas within the company. Further the aim is to provide suggestions to new work procedures regarding material distribution and related processes. Appropriate literature has been used as a support in this process. The main goal of a commercial company is to generate cash flow, and maximize the return on investment. Streamlining material supply and the use of material is a part of this process. Virum and Persson define logistics as: "Logistics is the approach and principles founding the process of planning, development, coordination, organisation, management, and control of material distribution from supplier to user".