The technological legacy from the early electrification of the Swedish railroads has resulted in a power grid with a lower grid frequency than the national power grid from which it is fed. Energy transfer between these power grids with different frequencies requires substations, adapting the grid frequency for the rail road power grid. For this purpose, a feeding power grid has been built, stretching across the country from Boden in the north to Tälle/Häggvik in the south.Power transfer in the Swedish power grid results in voltage angle differences which increase with increasing loads and transfer distance. These voltage angle differences are transferred from the power feeding substations to the rail road power grid, will in some extent cause loss of energy due to unwanted power flows from north to south.To minimize the losses due to this phenomenon, a power management system called EFS 132 kV has been developed and implemented. The system minimizes the unwanted power flows and controls the desired power flow for a good distribution of loads between the power feeding substations.This thesis investigates the extent of the transmission losses avoided due to the EFS 132 kV that coordinates the idling angles to a common reference point.The results indicate that EFS 132 kV affects the power flow, especially between the northern substations through an improved load distribution.

This report is the result of a master thesis at Linköping University - Institute of Technology and Uppsala University at the request of the chassi workshop at Scania CV AB in Södertälje. Since the beginning of the 90's, Scania CV AB has had a close cooperation with Toyota from which, among other things, the Scania Production System (SPS) has evolved. SPS explains Scanias' values, principles and priorities. The Technician department (MST) at Scania Chassi in Södertälje believes that SPS can streamline the technicians work and help them become a more homogeneous group. The purpose of this master thesis is to initiate an implementation of SPS within MST through two pilot projects involving both the product and process technicians. The SPS principle Normal Situation - Standardised working method was required to be implemented within one work task each for the two groups of technicians with special attention on the three subprinciples Standardisation, Takt and Balanced flow. The master thesis fulfilled its purpose as the two pilot projects initiated the implementation of SPS within MST and the three sub-principles Standardisation, Takt and Balanced flow were implemented within the two chosen work tasks.

Milk allergens were digested by allowing them to flow through a chromatography column, where pepsin was conjugated to the stationary phase of the column. The allergen fragments were then characterized both biochemically, by using SDS-PAGE and gel permeation chromatography, and immunologically, by examining their reactivity to IgE and monoclonal antibodies..

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The problem of separating a non-rectangular foreground image from a background image is a classical problem in image processing and analysis, known as matting or keying. A common example is a film frame where an actor is extracted from the background to later be placed on a different background. Compositing of these objects against a new background is one of the most common operations in the creation of visual effects. When the original background is of non-constant color the matting becomes an under determined problem, for which a unique solution cannot be found. This thesis describes a framework for computing mattes from images with backgrounds of non-constant color, using Bayesian statistics.

Reverse logistics is getting more and more attention both from companies and the public. It is an area with the possibility for companies to do good in the eyes of the public. This work focus on the return system of a one-way handling material called the loading ledge. The loading ledge is developed by IKEA as a substitute for the EUR-pallet in transports from suppliers with a long distance and even flow and in transports from suppliers with short distance and uneven flow. The loading ledge is made out of 100 % recyclable plastic.The purpose of this work is to find the most efficient set-up for recycling of loading ledges within IKEA on a European level from a transport and handling point of view considering aspects like cost, environment, time and, from an administrative point of view, user-friendliness.Who will the participants of the set-up be, where will they be located, which transports are needed and which income and costs does the set-up generate, are questions that will be answered.

This Master degree project has been performed at the Braviken paper mill on papermachine 53 (PM53) which produces newsprint paper. The current economic situationhas contributed to declining demand for newsprint, which means it is extra important tobe competitive by high energy efficiency. Particularly as energy prices are expected torise when the economic growth returns.One way to increase energy efficiency is by reducing the water use in paper and pulpmills and consequently save energy through reduced heating of water. The thesis's maintask is to evaluate whether a water purification plant (microflotation plant) forpurification of process water in PM 53 is profitable. The microflotation plant enablesreuse of warm process water instead of losing the energy to receiving waters.

The number of LBOs in Sweden has increased during the last years and the current market trend is positive. MostLBOs involves private companies, but a few concerns public corporations on the national share market. In this thesis we will examine the conditions of a LBO of Cloetta Fazer AB. The purpose is to study existing conditions of Cloetta Fazer AB and to examine pros and cons with the deal. Based upon information presented in the frame of reference and in the empirical part, two cash flow valuations have been carried out.

 The objective of this thesis is to examine the difference in workability in fresh concrete, when crushed fine aggregate replaces natural gravel. The shape of the fine aggregate,  packing and flow of six crushed material and three natural materials will be determined by easy studies, the results will be compared with a slump cone test..

This report analyzes disposable packaging and returnable packaging with the methods life cycle analysis and life cycle costs analysis. These two different packaging are analyzed through the company Clas Ohlson?s packaging-flow. To get a picture of how the flow works, a visit at the company and email contact have been done with Clas Ohlson to get relevant informationToday Clas Ohlson has a big flow of articles to the stores without larger variations in the demand, with the exception of autumn, which is when customers start shopping for Christmas. Clas Ohlson?s articles are placed on a pallet and are wrapped into plastic-film for protection and to make sure that nothing will be stolen.

This study investigated relationships between high level language functions and phonological working memory in adults by correlating results oftests in a test battery used for investigating subtle language disorders and digit span task results. Results of two digit span tasks were analyzed in relation to demographic factors. 103 subjects without neurological disease, 20 ? 79 years old, participated. Significant correlations were found between the digit span tasks and most of the tests.

 Saab Microwave Systems (SMW) is a business unit within Saab AB that manufactures and develops different types of radar- and sensor systems for naval, airborne and ground based forces as well as within the market for civil security. In addition to the manufacturing of radar and sensor systems they also provide different types of service concepts. The business unit has 50 years of experience within the area of developing radar systems and is considered to be one of the market leaders. When applying an assemble-to-order production strategy with products at this level of cost price the product lead-time is vital and becomes an important part of the strategy within marketing and sales. Within SMW there is a new department called Supply Management (SM) that provides the supply of incoming and outgoing material. Within SM there are four sub-departments working with activities such as planning, purchasing, receiving inspection, storage and distribution.

Husqvarna AB operates two warehouses located in the area of Jönköping. The most important task is to manage the large volume fluctuations during the peak season. DHL Exel Supply Chain (DESC) run the warehouses and the domestic transportations is outsourced to DHL Express. A number of forwarder agents are responsible for distributing the export gods. In the present situation a bottleneck occurs at the warehouse loading section, and the consequence is fulfill the time of delivery for all customer orders.

The water level of Lake Mälaren has been regulated since the 1940?s. A recentinvestigation suggests that the current regulation needs to be adjusted in order toprevent a decline in water level, salt water from infiltrating from Lake Saltsjön,and risk of floodings. In addition to these preventions, the new regulation couldpotentially effect the natural environment and agriculture practices in the lowlands that surround the lake. The new regulation proposal calls for an increase invariations in Mälaren?s water level during seasons, while the annual mean waterlevel will remain the same.