This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

The aim of this study is to gain knowledge about the internalcommunication at a public library in Sweden, focusing on the flow of information and the library employee?s role as a source and receiver. This is an important subject because internal communication affects not only the internal work, but also the users. Despite this there are few studies about internal communication in libraries. The research questions used are: How do the employees perceive the role as source of information, and what choices do they make before they spread information? How do the employees perceive the role as receiver of information? How do the employees feel that the information flow works in the organization as a whole?The research is founded on five qualitative semi-structured interviews with the library employees.

Emhart Glass is the world?s leading manufacturer of equipment, controls and components to the glass container industry. The goal of this project has been to identify improvements and propose cost saving solutions when moving one of Emhart Glass work cells in Sundsvall. The changes shall result in improved work environment and increased product quality. The method contains value stream mapping, concept selection and P-FMEA and complies with Emhart Glass goal to become a more Lean focused business.

This Master Thesis is a product development project that has been carried out in cooperation with Scania CV AB. The purpose has been to find the relationship between geometric parameters and the swirl number for an XPI- cylinder head in order to improve the design specification.The increased focus on environmental issues from society leads to tighter emission legislations for the truck manufactures. In order to drive the development forward considerable resources are spent on research and development on diesel engines and its combustion process. The inlet air has a significant impact on the formation of emissions and the flow that is desired is called swirl. Swirl is achieved by making the air rotate around the vertical axis of the cylinder.Earlier cylinder heads that has been developed at Scania CV AB have shown clear relationships between geometric parameters of the cylinder head and the swirl number.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

Title: The appraiser?s choice of valuation method ? factors that influences the choice of company valuation methodsSeminar date: 04/06/07Course: Master thesis in Business Administration, 10 Swedish credits.Authors: Anne Benedicks and Veronica ÖbergAdvisor: Eron OxingProfession of category: Financial analysts, auditors and company lawyers.Key words: Company valuation, valuation methods, cash flow analysis, comparative valuation, the net asset value method.The Main Issue: What is of decisive importance when choosing a special company valuation method?Purpose: The purpose of this paper is to identify, analyse and evaluate the most common methods of valuation for financial analysts, auditors and company lawyers and those factors that influences the choice of method.Method: A multiple survey has been implemented for the actual profession categories. Primary data was collected through semi-structured interviews and a questionnaire survey.Theoretical: The theoretical frame of reference is based upon the paper?s dependent variable, i.e. the role of the appraiser.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

The purpose of this work has been to investigate if there are any differences in the valuation process at infringements when highway and railway are built. The work has mainly been concentrated on the negotiation process in which The National Railway Department (Banverket) and The National Road Administration (Vägverket) try to get agreements with the land owners. The agreement includes compensation for infringement effects that affects the landowner?s property. The National Road Department uses the road law (Väglagen) when a highway shall be built.

This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik.The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains improvement suggestions about how the company can use the current computer system more efficient.The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation.The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if improvement can be done and how the flow of information is supposed to happen.In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section.Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented.The work consisted in making the groundwork for a template.

During the last years, the importance of sourcing in firms has increased. Globalization, fierce competition and an increased level of outsourcing are common explanations to why firms have highlighted the potential to realize savings and the value creation that the Purchasing department can generate. One trend that follows in parallel with globalization is an increased pressure from society on firms to take responsibility for the impact that its products and services have on the environment. This responsibility creates even more attention as outsourcing involves trade with suppliers in low wage countries, where the level of environmental and social responsibility is not always satisfying. The Purchasing department, the firm?s interface with suppliers should therefore, together with the firm?s Environmental department, play a key role in the firm?s contribution towards sustainable development.

The goals of this essay are to identify rituals and ritual behavior at the department of archaeology and ancient history at Lund University. To do this a series of empirical examinations was conducted. Observations, interviews and polls revealed that some ritual behavior is in fact present. Two types of rituals were identified; the interaction ritual, as presented by Erving Goffman in the book Interaction Ritual, Essays on Face-to-Face Behavior, in 1967. The second type of ritual is a ?problem solving? ritual, such as meetings.

Sedan år 2005 har personal vid Sahlgrenska universitetssjukhuset utvecklat ett triage system utifrån Manchester triage system till det svenska Medical Emergency Triage and Treatment System (METTS). Syftet med denna studie var att undersöka om METTS är ett stöd för ambulanssjuksköterskor/sjuksköterskor i deras bedömning av patienter. En kvantitativ design har valts genom att samla in enkäter från två olika län i Sverige. Insamlad data sammanställdes via statistikprogrammet Statistical Packagefor Social Sciences (SPSS) version 20.0 och analyserades i deskriptiv och analytisk statistik. I resultatet framkom det att METTS var ett system som hjälpte sjuksköterskorna i ambulansen i sin bedömning av patienter prehospitalt.

AbstractThis bachelor?s thesis at the Department of Production Engineering at the Royal Institute of Technology in Stockholm deals with the subject of automated metrology. The degree of automation of tasks within production has been a growing trend but the measurement of quality has not followed the same trend. The main thesis follows:What incentives are there to automate the measurement of quality in production?What factors are crucial and why are not all metrology automated?The thesis comes along with a number of sub-queries and delimitations.The working method includes both theoretical and empirical studies.

Lerbodaälven is a river in the municipality of Kil which, due to high phosphorus content is not meeting the requirements for good ecological status according to the Water Framework Directive. The purpose of this report is to investigate the causes for the high content of phosphorus that has been measured in Lerbodaälven between 1995-2010. Four questions will be answered in this report. 1. Does the sewage treatment work affect the phosphorus level in Lerbodaälven? The result from the time series analysis shows that the sewage treatment works have a small impact on the phosphorus level in Lerbodaälven.

In an ever more competitive environment Sandvik Materials Technology,SMT, runs a large-scale program to improve their processes for product development.The purpose with the program is to increase the company?s profitability by increasingthe number of new products in their product portfolio. The strategies SMT is usingfor reaching their goals are to change the way they work with product development byreducing lead time and learning how to prioritize products with the highestprofitability. In the R & D Department the work of improvement pursue by adaptingLean R & D to their way of working. Lean R & D encourages working withcontinuous improvements and eliminating waste.The main purpose for this Master?s Thesis is to develop didactic support to make iteasier to implement Lean in SMT R & D department.