As a consequence of the exports of Saab AB?s airplane 39 Gripen the departmentFATPA has grown and developed substantially in a short period of time. With the aim toclearly define and describe the establishment and its new work procedures and routines,which are meant to be applied after the turn of the year 2005/2006, FATPA is aiming todevelop a management model which will contain the above. The purpose of themanagement model is to describe how the department FATPA wants to work, especiallywith consideration to the department?s management.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.

IT has become more evident in most organisations and has grown to be a part of the infrastructure rather than a tool for competitiveness. Therefore focus should now lie on how IT is adjusted to the business rather than on the usage of IT. To make the best use of IT in the business the CIO needs to start think more business-oriented instead of as before, technology-oriented. To develop the IT-department in that direction the IT-staff need to start cooperate with the business and gain knowledge about stakeholders, markets and the way of working for other staff members in the business.With this as a basis, the purpose of this thesis is to investigate attitudes regarding cooperation between the IT-department and the business and if there is any difference if the CIO has business related background or not.To fulfil the purpose a quantitative investigation with the help of surveys was conducted. The sample consisted of 18 companies with 100-200 employees in the area of Jönköping.

This report is focusing on problems with introducing standard enterprise resource planning systems (ERP) in businesses. A study has been carried out on a service and support department at a Swedish heat metering company, SVM North Node. The study aims to help the company become a better customer in choice and customization of a new ERP system. We make a description of the department studied and the work carried out there, on the basis of learning, knowledge and cooperation. As a final point we present some ideas on how computer systems could support their work, hoping that this will result in them making adequate demands on a new ERP system.

The aim of this report is to increase the knowledge and understanding of the problems within the production at AQ Enclosure systems, and thereby achieve a more stable flow throughout the whole process, a better working environment and better competition advantages. The internal flow along with the external cooperation is very important for the company, because it views flexibility and short leadtime as it is the most important competitive means. The part of AQ production that?s been investigated is the manufacturing of ATM-machines, where the costumer is Banqit. This company is a rater small company with about 4 % of the world market of ATM-machines.In order to achieve the aim of the report extensive interviews have been carried out with employees at AQ.

This master thesis is developed based on the desire of the water and sewage department in the municipality of Karlskrona. The department, which vouches for the quality of produced drinking water and sewage cleaning, was in need of help dealing with risk analysis.The water and sewage department is obliged to identify and assess risks according to Swedish legislation. However, no guides for this purpose regarding safety, health, environment and quality were available. The aim of this report was to accomplish a guideline for the performance of risk analysis within water and sewage plants. If the guideline is used, the requirements in the legislation will be obtained.

A crisis is something that can happen to all of us in an unexpected situation, and the school should be prepared in a way that is the best way to handle a situation with a wide foundation through a crisis plan. On a well-defined way, you should have a developed and relevant emergency plan. Defining the word crisis can be difficult, it is an individual interpretation, and to get found out what the word stands for and it have to be discussed. The two selected schools that I have chosen to interview have discussed the understanding of the word crisis in able to get what the word means for them. The two selected schools have come to the conclusion that a crisis is something that creates disturbances for people or a person concerned to the everyday way of living.

Intranet is today a common technical groupware to communicate in many organisations. People can interact through the Intranet and communicate within the organization and get relevant information according to their workplace. It can be difficult to get everybody to use the Intranet as an information- and communication tool. This causes problems when people want to reach out with information. With these thoughts we entered our work at Luftfartsverket at Arlanda airport.

The effects of the deregulation of the electricity market 1996 in Sweden on short-term hydropower regulation are unknown. This report investigates patterns in subdaily regulation in the Ångerman River Basin during the period 1993-2011. Differences in subdaily flows and zero flow events between the periods 1993-1995 and 1996-2011 were studied by analyzing hourly data from 8 regulated and 8 unregulated locations with four subdaily flow variation indices. No correlations between the market deregulation and the regulation intensity in the Ångerman River basin were detected. The number of days natural ranges of variability were exceeded and the magnitude of subdaily variation were significantly higher at regulated locations.

Mathematical models possible to simulate are of great importance in order to make successful projects in the aircraft manufacturing industry. An aircraft fuel system is very complex, containing pipes, tanks, orifices, valves and pumps. The principal of this thesis is using the tool Easy5, which no longer is considered reliable enough in terms of development and support. This thesis tries to evaluate the Modelica language as a possible alternative to Easy5. To make this evaluation, the components concerned in the fuel library in Easy5 are implemented to the Modelica language.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution. The work proceeded with an extensive search for abrasive flow meters along with obtaining information about flow measurement in general. When the search for abrasive flow meters resulted in nothing all the efforts were concentrated on finding a principle of measurement that could cope with the criteria.

Patienter kommer till akutmottagningar med stora variationer av sjukdomar, skador, ålder och psykologiska tillstånd. Arbetet på akutmottagningen är ofta mer inriktat på de medicinska aspekterna av omvårdnad. Det är patientens upplevelser av omvårdnaden som fungerar som en bedömning av hur bra omvårdnaden utförs. Syftet med denna studie är att beskriva patientens upplevelser av omvårdnaden på akutmottagningen. Den metod som använts är en litteraturöversikt av tolv artiklar med kvalitativ eller kvantitativ metod.

Den första process som möter den akutsökande patienten på en akutmottagning är triaget, vars syfte är att bedöma patientens medicinska tillstånd. Att hänvisa en akutsökande patient till annan vårdnivå är ett komplext beslut, som ska fattas med kunskap, erfarenhet och med respekt för den enskilda patienten. Syftet med studien var att beskriva sjuksköterskornas upplevelse i hänvisningssituationen av akutsökande patienter, med Triagehandboken som beslutstöd. Metoden var kvalitativ med semistrukturerade intervjuer. Åtta sjuksköterskor på en akutmottagning i södra Sverige inkluderades i studien.

The aim of this study is to examine the significance of having a music department at the public library in Enköping, and how the organization of the phonograms is handled. The different areas examined are the reason of the reintroduction of a music department, its budget, its users, the work with selection, the marketing, statistical data concerning loans, the work with classification, indexing, and organization of the phonograms and the future of the music department. The empirical material consists of qualitative interviews with staff connected to the music department at the public library in Enköping. For the theoretical frame, Sanna Taljas discourse analysis of music libraries in Finland is used. Talja presents three discourses which all show different views on what kind of material a music library should contain.