Reading spaceFurniture for reading for the new city library of GöteborgThe main purpose of my project has been to inspire people to read books at the library. I wanted to create something very site specific and chose a room on the second floor of the new city library to work with. To be able to relax, feel inspired and to concentrate on reading, the visitors of the library need to experience a sense of security. My solution to the different conditions or problems in the room and the needs I identified is a seat hanging inside a frame. When sitting down in the seat, the frame is low enough to see over but it is still experienced as a private spatiality.

Tile covered bathrooms require a wellexecuted waterproofing in order toprotect the underlying construction frommoisture. Länsforsakringar Uppsala paysannually out millions in insurance fordamages related to poor waterproofedbathrooms. In recent years, SP (SwedishNational Testing and Research Institute)investigated and researchedwaterproofing products, resulting ingreater shortcomings of product defectsthan expected.This report raises the problemsconcerning waterproofing and discusseswhy they occur. By studying productinstructions and insurance cases anddamage reports provided byLänsforsakringar, the most commonproblems concerning bathroomwaterproofing where concluded. Animportant part of the report was tofind out the actual cause to whywaterproofing damages occur.The results of the survey indicate thata common cause of water damage usuallyis related to poor productinstallations.

In the farrowing pens the amount of bedding material and the quality of the concrete floor has a huge impact on both the sow and the piglets. In this study imbedding of rubber flooring on the solid area in the farrowing pen was used to see if it had any effects on the sows lying behaviour when compared to concrete. Another important aspect was to evaluate if the rubber floorings had a high enough durability to resist the normal wear in a farrowing pen. Concrete flooring is assumed to have a higher thermally conductive effect then rubber which can affect the sow?s chance to cool down.

This paper investigates the science fiction novels of Swedish crime writer Per Wahlöö, most famous for his collaboration with his writing partner Maj Sjöwall on the ten Martin Beck mysteries. During two important years, 1964 and 1968, Wahlöö wrote the novels Murder On the 31st Floor and The Steel Spring, set in a near future land ruled by a social fascist power structure where political opposition is eradicated. The pretexted notion of this paper is that these novels consists of extensive quantities of criticism against the Swedish welfare state and the monopoly-capitalistic Swedish press during the sixties. Through the lens of science fiction theory and the notion of the novels as historical sources this paper concludes that PerWahlöö´s science fiction becomes a bridge between the classic Swedish detective novel and the new social critic crime fiction in the style of Sjöwall-Wahlöö and others. The novels are also representations of the historical process in the mid-sixties during the radical turn: the sci-fi novels as social criticism of the contemporary society ? an utopian flare.

This paper investigates the science fiction novels of Swedish crime writer Per Wahlöö, most famous for his collaboration with his writing partner Maj Sjöwall on the ten Martin Beck mysteries. During two important years, 1964 and 1968, Wahlöö wrote the novels Murder On the 31st Floor and The Steel Spring, set in a near future land ruled by a social fascist power structure where political opposition is eradicated. The pretexted notion of this paper is that these novels consists of extensive quantities of criticism against the Swedish welfare state and the monopoly-capitalistic Swedish press during the sixties. Through the lens of science fiction theory and the notion of the novels as historical sources this paper concludes that PerWahlöö´s science fiction becomes a bridge between the classic Swedish detective novel and the new social critic crime fiction in the style of Sjöwall-Wahlöö and others. The novels are also representations of the historical process in the mid-sixties during the radical turn: the sci-fi novels as social criticism of the contemporary society ? an utopian flare.

This diploma work has been carried out in collaboration with the building contractor Sh Bygg Fastighetsutveckling AB in Uppsala with the intention to investigate how the height of a building affects various energy aspects such as transmission losses, infiltration, and the specific energy usage. Three different reference objects have been studied. The reference objects have been simulated for four different heights in the calculation program VIP-Energy.The results show that an increase in floor number can lead to both advantages and disadvantages. As the number of floors increases, transmission losses per square meter floor area decreases. However, as the height of the building increases, the reduction rate decreases.

Cattle have a species specific movement pattern when lying down and getting up. They need sufficient space for their heads to perform these movements normally. The aim of this study was to investigate the lying down and getting up behaviour of beef bulls at a Swedish farm operation. The hypothesis was that bulls older than 10 months (over approximately 400 kg) were disturbed by a horizontal front rail and that the time to lie down and get up differed from what can be regarded as normal based on earlier scientific studies. The bulls were Swedish Red and White (SRB), Swedish Friesian (SLB) or crossbreeds of these two, and were kept in a cubicle system with a stall front design where there was a horizontal rail 40 cm above the stall floor.

Between 1965 and 1974, the Swedish Parliament decided to build one million dwellings, called Million Program. The million program buildings were erected with new, untried design solutions, in a short range of time, and at low cost. The residential buildings from that time are now greatly in need of renovation. The municipal housing company, Gavlega?rdarna, renovates and improves the energy efficiency at some of it?s apartment buildings in the district Sa?tra, Ga?vle.

This bachelor thesis contains the findings of an investigation into the laying of wedge sawn wood flooring. The advantage of wedge sawn wood flooring is the usage of more material from each board reducing waste. The boards follow the natural profile of the tree where the root part of the board is wider, and the top part is narrower. The technique involves placing boards side by side with adjacent boards in opposite directions. The thick base of one board is neighbored by the narrow top of another, this creates a pattern of wedges in alternating directions, known as a ?root and top? system. Existing literature into this type of flooring is sparce.

The purpose of this of this essay is to explore the construction of a conservatory that is livable allyear around. When you build a conservatory there are several factors that need to be regardedthat usually are of no importance when you build a regular conservatory. The glassed facadeneeds to have a very good U-value and all the parts of the facade need to be isolated and theconstruction needs to prevent thermal bridges.In this essay we will start by looking at the shape of the conservatory. Due to the façade consistsof glass the conservatory will need to have a good ratio between the area and the façade so thatthe heat losses will be at a minimum. However, due to the fact that one of the sides of the façadeis connected to the warm house, you quickly realize that the shape of the conservatory is of noimportance.There are two common ways to build a foundation for a conservatory, a molded concretefoundation and isolated wooden beams.

This work is about getting to know tufting as a technique and to design tufted products for home furnishing.It all began in Finland, where during springtime 2004, I got in contact with the technique oftufting for the first time. A very pleasant meeting that resulted in two carpets and a longing to continueand learn more. It was then that an idea for my final project started to take form. My wish was to designtufted ?floor jewelleries? and cushions.I made a base for my project during a design project in autumn 2004.

This essay is an analysis of the objects made of bronze found in an excavation Västergarn parish, Gotland, in 2010, conducted by the University of Gotland. The studied material presented in this essay comes from contexts inside, as well as nearby the foundation of a medieval building which purpose is still not certain. The first purpose of this study is to present the bronze-objects found inside and nearby the foundation of house 6, and to see if there are any datable objects. There is also a discussion whether there has been any bronze-crafting in the area. The second purpose is to make a contextual analysis to see if there are any differences between the material found outside and inside of the building, and what conclusions can be made regarding the function and use of the building.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

The calf extrator?s function has been studied, through measuring traction and how this varies in different situations, in comparison with corresponding manual traction situations. This was done against the background that excessive force at assisted calvings at dystocia can mean life threatening damages on the calf such as grave acidosis, vertebral fractures, femur fractures and rib fractures. The calf extractor has earlier been measured to pull with greater force than the established maximum force of ?two strong men?.

The industrialization in Sweden has increased the large number of areas that have been contaminated with various types of pollution. One of those sites are the property Höjen 3:24 in Arboga where ?Arboga Mekaniska Verkstad? once been. The property wants to increase the use of the old former foundry building with the adjacent ?plate-workshop? and believe there are two options for the building: That the building either should be used as a warehouse/concert hall, or rebuilt into a cultural center. An environmental evaluation has shown that the levels of heavy metals are over the Swedish environmental protection agency guidelines of less sensitive land.