Envirotainer builds containers that are specialized in transporting of temperaturesensitive products these containers are customized for airplanes. The containers arethen leased to other companies, most often to pharmaceutical companies.Envirotainer are based in Lagga, Knivsta. It is also here where the production of thecontainers is held. The container RAP T2 was designed in the early 80ies. The RAPT2 contains a fleet of about 1220 containers spread all over the world.

The purpose of this study was, if possible, to find a housing system for growing bulls that was as optimal as possible for the animal welfare. In order to select housing systems you must take into account the size of the group, body weight and the type of floor. Seven of the international most common housing systems were compared, straw bedding, deep straw bedding, sliding straw bedding, concrete slatted floor, rubber coated slatted floor, cubicles and feeding cubicles. Studies that have examined the proportion of tail, claw and leg injuries and the presence of unnatural behavior in the different systems. In summary, all studies showed that soft underlay were beneficial for the animals in terms of the proportion of bone lesions and swellings.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

One aim of this thesis has been to trace the driving forces among active members of the Swedish Pensioners? Interest Party (SPI), but also to render how party values and ideas are connected to the concepts of is-sue space, distrust, and New Party Politics (mainly populism). Since there are several pensioners? parties in other countries, my second aim has been to investigate whether the party is a result of a diffusion proc-ess of copying a successful equivalent party; in other words to find out whether a master frame has inspired the forming of a Swedish pension-ers? party. Through interviews and document analysis, I have found seven issue dimensions explaining the motives behind my respondents? engagement in the party.

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..

Good comfort for the driver of a construction machine is crucial. Gearshift comfort is an important part of the total comfort. Volvo Construction Equipment Components has a simulation environment of the powertrain, SimPow, which is implemented in Matlab/Simulink. SimPow is mostly used for simulation of control strategies and performance. In order to be able to study gearshifting comfort, Volvo has an interest in developing new models for SimPow.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

The courts international juristiction within the European union is regulated by the Brussels I Regulation. Article 2.1 of the Brussels I Regulation contains the fundamental provision. According to this Article the plaintiff shall submit an action where the defandent is domiciled. The Regulation provides exemptions to the this provision in Article 2.1.The court of the international case can also be determined according to Article 5 (1) of the Brussels I Regulation. This Article contains an alternative to the general provision within Article 2.1.

Today's climate and environmental issues have now been up for discussion for quite long. Various environmental measures have been taken, but it is not always certain that those measures actually are for the better because of the complexity of our environment. Therefore, studies of whole life cycles are very important even if they are time and resource intensive.Real estate accounts for 15% of global carbon emissions, but also affects our environment in many other aspects. In Sweden this number is even higher. About 30 % of its carbon dioxide emissions originates from building sector and changes are therefore of great importance.

Today's climate and environmental issues have now been up for discussion for quite long. Various environmental measures have been taken, but it is not always certain that those measures actually are for the better because of the complexity of our environment. Therefore, studies of whole life cycles are very important even if they are time and resource intensive.Real estate accounts for 15% of global carbon emissions, but also affects our environment in many other aspects. In Sweden this number is even higher. About 30 % of its carbon dioxide emissions originates from building sector and changes are therefore of great importance.

Comfort analyses regarding human induced vibrationsIt is not too common among civil engineers in Sweden to perform comfort analyses considering the vibrations caused by human activities. In addition, the Swedish standards lack requirements to be used for comfort analyses in design of floor-systems. The demand for large spans in combination with slender slabs, is today a reason to investigate the floor-system constructions, in order to prevent disturbing vibrations and oscillations.The purpose of this thesis is to create a guide for how a comfort analysis, considering vibrations, should be implemented. Göran Svedenbjörk who is an expert in structural dynamics has been interviewed where he presents his latest project Värtaterminalen and answers some questions about vibrations due to human activities.Floor-systems, consisting of concrete slabs supported by steel or concrete beams, have been investigated with simulations in the finite element program Abaqus. In the simulations, the influence of various factors on the natural frequency of floor-systems and the acceleration level caused by dynamic loads, is studied.

This thesis includes a mechanical engineering design work performed incollaboration between ÅF and Halmstad University. The work is done by FredyOlsson?s methods of Principle- and Primary Construction and David Ullman?stheories of Design for Assembly.The group was commissioned by ÅF to produce a concept to narrow down theassembly time of today?s luggage doors by reducing the numbers of adjustmentoptions. They also wanted it to be easier to mount the assembly by making itpossible to adjust the door in a closed position. Today luggage door takes, with its10 adjustment possibilities, around 4 hours each to assemble and ÅF wanted anassembly time around 10 minutes per door.Initially a preliminary study was made where the group began reviewing today'sconstruction and mounting of rails and doors on buses.

The first part of this essay is about a single-family house that we have planned and projected. Thesecond part is a deeper study in ways to further insulate windows when they are not in use.In the first part the building?s design and its most important construction elements are described.The planning of all major installations (heating, domestic water, ventilation, sanitation, electricity)are reported so that one can in principle start construction of the house. In addition there arecalculations done on the building?s energy management.The result is a two stored house angled toward the south.

This thesis describes a conceptual design of a support frame for a synchronousgenerator used in a vertical axis wind power plant. In this system the generator isplaced on ground level. The thesis also considers the design of housing for thesupport frame and generator. The concept presented in this report is based on anearlier design. Besides geometric design, simplified simulations has been run in orderto optimize some of the parts included in the construction considering naturalfrequencies and structural strength.The result is presented as CAD-models andan assembly drawing..