The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

The purpose of this degree project was to examine which remedies are available to individuals when the State has violated their right to a fair trial as stated in article 6 in the European Convention on Human Rights. Furthermore, the aim was to, in cases where the remedy is determined to money, to clarify the indemnity rates that apply in determining the non-pecuniary damages. The starting point was a review of the European Court practice, domestic Swedish practice and relevant literature.The outcome of the review is that the remedies available to the individual?s disposal can be divided into two categories: primary and secondary remedies. Primary remedies mean compensation not consisting of money, and must be exhausted first.

The project was carried out in cooperation with the department of product development IOS at IKEA. The work included improvements of a new existing product that Ikea soon will release on the market, Observatör, a wall bracket for flat screens. The product is supposed to fulfil the needs within this market for IKEA. However, since Ikea was not satisfied with it, our work was to carry out the improvements that were specified in the beginning of the project. Another task in the project was to develop a side-product that is supposed to be used together with Obeservatör for storage of DVD/decoders.The project included labour as problem definition to final technical drawings and a prototype.

Research in solar energy is taking big steps in both solar heating and solar electricity. It´s not only the technologies alone, but also the combination of both solar electricity and solar heating which is what is called a solar hybrid. The idea of a solar hybrid is that a solar cells efficiency decrease with increased temperature and can with help from a solar collector be cooled and the heat can be utilized. This thesis report compares heat production and electricity production with respect of, in first hand, a solar hybrids geometry in the cooler. The theory chapter describes solar heating and how different solar cell technologies work and their environmental impact at the production and how compatible these technologies are for the solar hybrid.

Bobergs printing house in Falun has during some time had problems regarding deposits on blankets intheirs Müller Martini UV-printing presses. Deposits appear in both image areas and non-image areas.These areas have been analyzed and the deposits on non-image areas contain chalk, clay and talc. Thequestion remains how these material bond to the blanket surface. The chalk and clay comes from thepaper. The talc comes from the ink.

Working with a three-dimensional shape that adjusts light seemed exciting. Venetian blinds became a basis and source of inspiration in my project. What is a Venetian blind? I arrived at the de?nition ?a surface of angleble pieces for sun adjustment?. From that simpli?ed meaning I started making sketches of what an alternative model could look like.

This paper has evaluated a new type of prosthetic foot, X-Balance, which aim was to facilitate the performance on uneven ground for the user. This study have performed gait analyzes with three prosthetic feet, the X-Balance, Flex-Foot and assure Ottobock9192 on flat and uneven surfaces using 3D analysis system QTM (Qualisys Track Manager) and associated force plates. During the project a prototype of a design that can perform a mechanical gait were manufactured. The prototype has then been used to fulfill the purpose and objective of this study which is to make different final sets that demonstrate differences between prosthetic feet. Gait analyses of individuals have also been performed to get an idea of what normal gait is.

The incineration of waste is steadily increasing in Sweden and so is the production of ashes. The bottom ash has for many years been used as construction material in landfills. Now many of the nation's landfills are closed and there is a great need to find another beneficial use for the ash. Bottom ash is a gravel-like material and with its material properties it can replace natural gravel in parts of roads and surface constructions. Today this use is only approved within landfill areas where leachate is collected and checked.

When cylinders for motor saws are manufactured there are high demands on the cylinders strength and wearing qualities. Aluminum is a material with low density and is used by Husqvarna AB for their motor saw cylinders. The aluminum is strengthening with nickel that is attached to the cylinders through electrolysis. When aluminum is in contact with oxygen a film of oxide is formed. To eliminate the oxide and to prevent formation of new oxide zinc is used.

Waste appears to be a low-cost fuel compared to biofuel. This Masters thesis was conducted for Vattenfall Utveckling AB and deals with how waste in the fuel affects the performance of a SCR-catalyst. Different mechanisms of deactivation were surveyed, focusing on the poisoning mechanism. A literature study was carried out, which was used as a reference when analysing the results.Small samples (9x2x2 cm, 64 pieces) cut out from a full-scale unused honeycomb catalyst were exposed up to 1500h in two different combustion plants, Johannes in Gävle (co-combustion) and Högdalen in Stockholm (waste-combustion). The activity was measured mainly at 300°C but also at 250, 350, 375 and 400°C.

Den ökade förändringstakten i samhället på grund av ny teknik, internationalisering och att samhället blivit alltmer mångkulturellt bidrar till att större krav ställs på företag att hela tiden förbättra sin verksamhet. Akzo Nobel Surface Chemistry, Production Surfactants i Stenungsund, har huvudsakligen sina kunder och konkurrenter runt om i Europa. Då Sverige ligger i utkanten av detta område tar det omkring en leveransdag längre tid för Production Surfactants att leverera sina produkter i jämförelse med företagets konkurrenter. Detta medför att Production Surfactants behöver kompensera denna längre leveranstid genom exempelvis högre produktkvalitet, större flexibilitet eller lägre priser för att ha möjlighet att tävla på marknaden. För att uppnå detta behöver Production Surfactants utveckla och systematisera sitt förbättringsarbete.

Horseracing is frequently referred to as the engine behind all horse activity in Sweden and it can be divided in to two main branches: harness racing and thoroughbred racing (HNS, 2008). Jump racing is a part of the thoroughbred racing and the jump racing is characterised by jumps on the racing track. Jump racing has been a part of the Swedish horseracing for over hundred years, but it has in recent years suffered from low economic profitability and been threatened by discontinuance (ATG & SG, 2008). Svensk Galopp, who is governing the horseracing in Sweden, has decided to increase the importance of jump racing. A workgroup was created for this purpose, and as a result of their work a strategy for the jump racing is supposed to be delivered in April 2009 (pers.

Water is the most essential resource for life. In cases where drinking water is processed from surface water it is important to ensure the raw water is of good quality, and is suitable for processing through the water treatment plant.The drinking water for Västerås is sourced from Västeråsfjärden, in the western side of Lake Mälaren. The city itself is home to marinas, ports, a wastewater treatment plant, the Svartån outlet, sewage pumping stations and stormwater outlets. Because of the negative effects these activities have on surface water quality, Mälarenergi AB is interested in relocating the raw water intake point to Granfjärden, 10 km east of Västeråsfjärden. At Granfjärden the intake point would be less exposed to the activities in Västerås, and could be placed at a greater depth, resulting in better water quality.In this Master?s thesis the water quality and the pollution risks at Västeråsfjärden and Granfjärden sites are compared.

With 25 countries being members of the European Union, travelling and working in other countries has become significantly easier. But what happens when one culture meets another one in a work situation? More specifically, what happens when French and Swedish cultures meet? Would a Swedish manager lead his team in the same way as a French one would?My question is: What is management philosophy like in Sweden and France? Do the two philosophies resemble? And if not, in what ways do they differ?The purpose of this essay is to find out, by looking at the material used at management courses, what the Swedish management philosophy really is. And then look at whether there are any similarities between this philosophy and the French one. The idea is to examine how management is being taught in both countries, by looking at what management litterature is used at some of the highest ranked management schools in Sweden and France.There have been numerous ethnological studies concerning nationality and cultural behaviour, one of the most important ones is the study done by Hofstede.

The EU's Water Framework Directive aims to a long-term and sustainable use of our water resources and wants to ensure good water quality in Europe's water bodies. Discharge of polluted stormwater into receiving waters can be a threat to their ecological and chemical status. Municipalities are responsible for supervision of the environmental quality standards (EQS) and therefore need to gain knowledge of current stormwater management, the expected level of pollution emissions and possible appropriate purification steps to ensure that the goal of good water quality is achieved.This master thesis aims to provide this knowledge in the example case of Vallentunas urban area and wants to prepare future oversight so that it can be assessed how much the discharge of polluted stormwater into the local receiving water is a threat to its status. With the help of maps, aerial photographs, site observations and individual discussions those areas are mapped where appearance of moderate to highly polluted stormwater could be suspected. The degree of pollution at the discharge points is determined based on land use upstream and uses standard values according to the administrators assistance "Tillsyn av dagvatten" (MSL 2014).The study identifies 100 areas in need of supervision regarding their stormwater management.