Sök:

Sökresultat:

5033 Uppsatser om Five-factor model - Sida 26 av 336

Värmeöverföring i bergvärmesystem : En numerisk analys av den ringformade koaxiala borrhålsvärmeväxlaren

The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

Kvantifiering av föroreningstillskott från dagvatten inom skyddsområdet för Göta Älv : en simuleringsstudie med modellen SEWSYS

The river Göta Älv reaches between Vänern and Gothenburg and is the main raw water source for Gothenburg that supplies about 700 000 people with water. To protect and maintain a high water quality, continuously samples and water analyses are made throughout the river. In 1998 a protection area was founded between surte and Lärjeholm where the raw water intake is. This was made to increase the awareness of the importance to protect the water. However, there is a lot of contribution of untreated stormwater to Göta Älv within the protection area.Göteborg Water and Sewage Works commissioned this thesis where two areas, Tagene industrial area and Kärra residential area, with untreated stormwater outlets within the protection area are studied.

Sammanställning och produktion av ritningsunderlag till båt

Hanterbara båtar is a new company who builds alumina boats customized for people in wheelchairs. Due to the fact that the company only built two boats yet, the production documentation is not complete. The drawing that does exist is not in an exact standard which makes production planning harder.The purpose of this work has been to make the production of the boat easier and simplify further development and modification. Product development in the form of optimizing details is also one of the main purpose of this work.This is all done by making a 3D-assembly of all the existing drawings. After this is done new drawings will be made and added to the main assembly.

Ämnesordsindexering av ryttmästare John Andréns specialsamling : Utveckling av en indexeringsmodell utifrån teoretiska och praktiska perspektiv

This is an explorative study about subject indexing of a special collection of books, administered by the John Andrén Foundation at the library of Ystad. The study summarises a number of theoretical perspectives as well as some practical instructions on how to carry out the task. Theories have been placed into five different groups according to their various approaches to subject indexing. These have been analysed in regard to their usefulness to the Andrén collection. The authors have tested and evaluated six practical models on a selection of books from the Andrén collection.

"Det känns ganska fräscht att ha en Volvo för att nu har ju dom den i Solsidan" : En kvalitativ attitydundersökning om svenska tv-tittares attityd till produktplacering

Since product placement is a relatively new phenomenon in Swedish television, there is a lack of research on what attitudes Swedish TV-viewers hold towards it. This is where our paper will contribute to the research. The purpose of this reserachpaper is to describe and analyze what attitude Swedish TV-viewers has towards product placement. Kim Schröders multidimensional model of mass media reception were used, which is a developed model from Stuart Hall?s ?encoding/decoding? one-dimensional model.

PRODUKTIVITET N?R ARBETET BEDRIVS P? DISTANS med inslag av social n?rvaro och motivation

This study investigates how productivity works when employees have remote work in their workplace. This study will also focus on challenges that cause productivity to decrease when remote work applies. The empirical data shows that individual productivity increases when employees work in a workplace that provides remote work. The data says that less distractions and high autonomy is a big factor to why employees feel that they work productively at home. Briefly it shows that a flexible workplace makes individual employees work productively and even motivates employees to work effectively because of increased concentration and undisturbed work environment.

En utvärderingsmodell för testverktyg : Med inriktning på automatiserade högnivåtester

Testing has always been an important task in the scope of software quality. Though it has never been as much appreciated within the management of the organisations as the software development has. However testing is becoming more attractive within organisations because it becomes more evident how much money working systems saves in contrast to defect ones. A tester often use testing tools to simplify the work progress. There are a lot of tools nowadays but not many evaluating models which helps the tester to know which one to recommend.

Empirisk studie av den radiella förspänningskraftens variation i klassiska skärskruvförband

In this study, the pre-tension force in an insert screw connection are examined in order to establish a greater understanding of the system and to facilitate the process of making new metal cutting tools. Certain especially significant design variables such as the offset, the length of the contact thread and the shank length above the threaded hole, are selected to be closely examined. A comparison of the influence on the pre-tension force between threaded holes made with a worn, versus new, threading tool is also involved in the experiment. The study is limited to handling the screw sizes M2,5 and M3,5. The results show that a regression model, with good approximation, can be fitted to the measured values.

Kunskap om marknaden : Besöksattraktioners vikt och dess relation till turistmålgrupp och resesyfte

The name of the study means ?The short arm - a study in diversity and arm?s length in the cultural collaboration model?. Right now there is a reform in the Swedish cultural administration where the responsibility for handing out state funds and grants to cultural organizations is changing from the state government to the local regional governments. The purpose of this study is to map the organisational changes caused by the reform and investigate how this affects the regional policies concerning cultural diversity and the arm?s length principle.

Kundinvolvering i högteknologiska produktutvecklingsprojekt

Background: Knowledge of customer needs is a key factor in companies? struggle to develop successful products. Several studies illustrate that the main reason for failure in product development is lack of customer understanding. Lately considerable changes have occurred. Large-scale mass production is continuously being replaced by customer orientation, especially in the high technological market.

Deltagande i förändring : en förklaringsmodell av motivationsfaktorer till deltagande i förändringsarbete.

Hospital Mergers have been proved to be troublesome, the most crucial ingredient is believed tobe the participation of members of the organization on all levels. When the hospital mergerbetween the hospital of Malmö and the hospital of Lund is a fact, it seems clear that knowledgeabout managing motivation is important. The knowledge could also lead to increased possibilitiesto improve support for motivation where needed at the hospital.I have through a literature review created a descriptive model of the theoretical view onmotivational factors for participation in change and their relationships. The theoretical modelwhere then tested in a empirical study in which additional data created a more true model of themotivation on participation at the hospital.The findings of the study show how the descriptive model illustrates how the twodifferent departments both work with a empowering philosophy that have built in properties thatenable the employees to gain more motivation. The model also underline the importance of thecommunication role to enlighten the employee in what, where, when and why the change takesplace.

GRÖNYTEFAKTOR I ETT NYTT PERSPEKTIV - Går ekosystemtjänster att mäta med fjärranalys?

Due to an increased population in cities the need of densification of cities increases. This means that the amount of ecological elements in the city is at risk of decreasing. Ecological services contribute to the city?s climate by softening the negative impacts that densification of cities means. Thus increases the will and ambition in city planning in to preserve greenery.This is an interdisciplinary thesis within the subject of geography that studies Biotope Area Factor (BAF), a planning tool that is used in city planning with the purpose of compensating for lost ecological services associated with new housing estate.

Sitkagranens potentiella merproduktion jämfört med vanlig gran i Hallands län

Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

Beslutsmodell gällande finansieringsform samt intern prissättning av ett företags truckpark

To be competitive in the corporate climate of today it is important to have effective logistic activities. A common resource within the internal logistics is forklift trucks, which are used to lift and transport material. It becomes more and more important to decide whether to buy, lease or rent the forklifts to obtain an optimal economic situation. Many companies have issues with internal pricing. It is difficult to price products and services correctly. It is common to price the overall instead of what it really costs.The purpose of the thesis is to present a model for the acquisition of forklifts for internal logistic operations, regarding financing and internal pricing, to obtain economic effectiveness and an optimal forklift fleet size. The study focused on a specific research question, and for this purpose interviews with experts were held, observations were made and a literature study was done.

Förbättrad Kravhantering med hjälp av Lösningsinriktad Pedagogik

Abstract The purpose of writing this thesis was to improve methods during requirements engineering phase. Usercentred system engineering has some problem areas, which are examined and verified to create a new guideline for developers. This guideline tends to make requirements engineering more effective and help developers create more concrete requirements. It is not uncommon that system development projects ends up with unsatisfied users or delay in deliveries. The reasons are different kinds of communication problems between users and developers during verification of requirements. There is a therapy model, called solution-focused therapy, used in family and individual therapy. The model focuses on solutions for the future instead of problems in the past.

<- Föregående sida 26 Nästa sida ->