The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

Stump biomass is energy rich and stump harvesting for use as fuel become more and more interesting in Sweden. Swedish Forest Agency (2009) has estimated that stump harvesting in Sweden would respond to an annual energy supply of 57 TWh/year. However, stump has not been recognized as a bioenergy resource in Sweden. Suitable methods for pre-treatment of stump are probably of great importance to make it accepted as fuel. It is therefore rewarding to carry out an investigation in this area for stump. This report represents results from a diploma project, which was aimed to develop a fixed bed reactor for experimental study of biomass torrefaction, followed by TG analysis and kinetic modelling employing Ozawa method and different kinetic models including one-step and three-pseudo-component models.

Population growth leads to an increased need for new buildings, both residential and commercial. The regulations of structural design also changes with time. From a sustainable community perspective it may be profitable if existing buildings, that no longer performs their original function, are reconditioned. Knowledge and understanding of the surroundings of the residence must be available. Regulations regarding accessibility to all has increased.

Deposits can be formed in the paper machine due to sticky materials from wood and recycled paper. These deposits get stuck on process equipment and cause the product quality to deteriorate and the efficiency of the paper machine is reduced. The purpose of this thesis is to increase the understanding about deposits among machine operators, and to suggest methods that can be used to reduce the amount of deposits formed in Bravikens paper machines.To fulfill the purpose of the thesis a pre-study, a literature review and interviews with machine operators and production staff, were carried out. These methods led to the planning and creation of an education about deposits for machine operators.The education about deposits for machine operators consisted of an interactive lecture to introduce the subject of deposits and a subsequent discussion. This approach was chosen to give the machine operators the opportunity to discuss their work situation on the paper machines related to their new knowledge about deposits.

Det är viktigt med ett effektivt samarbete och en välfungerande kommunikation i dynamiska miljöer, till exempel vid släckningsarbetet av en brand. Bristande kommunikation i en sådan miljö skulle kunna få förödande konsekvenser.Denna uppsats bygger på material från studien ?Bridging Cultural Barriers to Collaborative Decision Making in On-Site Operations Coordination Centers?, där 32 svenskar samarbetade i olika lagkonstellationer med att släcka simulerade eldar i mikrovärlden C3Fire.Kommunikationsteorier visar på att personer samtalar med varandra efter en viss struktur; deras yttranden tenderar att komma i par, så kallade närhetspar. Denna studie syftade till att undersöka närhetspar i beställningssekvenser, i form av en beställning av vatten och/eller bränsle följd av en bekräftelse. Till sin hjälp hade försöksdeltagarna en datorskärm med en karta samt tillgång till ett e-postverktyg för att kommunicera inom laget.

The aim of the thesis was to better understand how second language learners becomes lingual participants in a Swedish preschool. Using the following research questions: In what situations are SLLs lingual participants at the preschool? What does their emerging language look like? Are the participation any different considering children's time in the new L2 context? What kind of support does SLLs receive at the preschool?Two focal children at the same preschool was studied with ethnography of communication as method. The focal children chosen were one girl (Mandarin L1, 4.0 yrs) who arrived to Sweden and started the preschool two months ago at the time of the study, the other a boy (Serbian L1, 3.9 yrs) who started preschool and learning the L2 one year and two months before the study. Situations where the focal children interacted with other children or adults were analyzed. Results showed that the focal children in interaction with each other understands some of the others intentions before being able to speak about them in the L2.

To have a forest area close to the city is of great importance for the city population?s well being. Children develop their motor skills, concentration and imagina-tion and the adults have a place to shake of the stress from work. Forest areas are used to exercise at, play in and to find a moment of peace and silence. The urban forest and the old farming pastures at Markussonvallen and Per-Isakssonvallen already has natural assets worth to preserve and a great potential to create more. The goal is to develop a forest with a variation of tree species and ground vegetation that will appeal to the human senses and different animal species such as birds, insects etc.

Hydropower is the largest renewable energy source available in today's society. Operation and production is handled by high-tech electronics. This thesis is done on behalf of Statkraft Sweden AB who wants to explore the possibility of replacing the hydraulic cylinder with an electric actuator, generally as well as a case of a small power station on the river Nissan. Whether it is the chaplain or francis turbine vanes are actuated by hydraulic cylinders. Because of Gustavsberg hydropower is inconstant operation, this report is based on power calculations, which are read and computed according to the available hydraulic diagram.

This study aimed to evaluate the levels of formaldehyde and organic acids that can build up within enclosed spaces. Another goal was to compare two types of paints that can be used as coating barriers within showcases and in turn compare them to the modern, and by many highly recommended, material of Marveseal®. A low volatile waterborne alkyd/acrylate paint and a two component polyurethane paint was compared to Marveseal® in two series of experiments. One series measured the level of formaldehyde, and thus the effectiveness of the three chosen barriers, and the other series measured the level of volatile organic acids, both the acids emitted from the paint itself, and that of the wood. One box in each series were not treated at all and was used as a reference.The fact that different types of materials emit volatile organic compounds have long been known.

Minskad efterfrågan på traditionella produkter från skogsindustrin kombinerat med ökad efterfrågan på icke-fossila material medför att företag inom skogsbranschen alltmer intresserar sig för nya produktsegment. Holmen New Business Development, en forsknings- och utvecklingsavdelning inom företaget Holmen arbetar med att utveckla produkter där trä kan ersätta traditionella alternativ. En möjlig produkt för avdelningen är Wood Plastic Composite (WPC), ett material som består av en kombination av en plastmatris och ett träbaserat fyllnadsmaterial som kan ges olika egenskaper vilka skiljer sig från rena trä- och plastmaterial. Syftet med denna studie var att undersöka hur designers och produktutvecklare inom olika svenska branscher ser på användandet och utvecklingen av WPC inom sina produktområden, både idag och i framtiden. För att undersöka detta har 18 kvalitativa intervjuer genomförts med företag inom möbel-, köks-, fönster-, dörr-, staket- och trallindustrin. Studien visar att ett lågt pris, hög beständighet mot till exempel röta, fukt och mögel samt att materialet går att bearbeta på samma sätt som trä är de mest önskvärda attributen hos framtida WPC-material. Miljövänlighet hos produkten är ett attribut som respondenterna tror kommer få större betydelse i framtiden men som kunderna inte är beredda att betala för idag.

This study concerns mapping and analysing two different Supply Chains at Setra Group. Setra Group is Sweden?s biggest producer of solid wood and is primarily owned by Sveaskog, Mellanskog and LRF. The Company consist of twelve sawmills, five planning mills and an organisation for distribution of building material. This study maps one chain for Swedish Glulam standard beam and one chain for solid pine flooring on export to Japan. The glulam chain is based on spruce as raw material and includes all actors between sawmill and the Swedish building material retailers.

Bioenergi är en stor industri i Sverige och står för en betydande del av energiomsättningen. Bioenergi i form av flis förvaras runt om i landet på hög i väntan på förbränning. Då högarna läggs upp startar olika processer som värmer upp stacken, ofta till temperaturer på 50°C under det första dygnet. En vanlig ansats i litteraturen är att denna temperaturstegring beror på aerob nedbrytning. Arbetet ämnar undersöka om denna uppvärmning endast beror av mikrobiella aktiviteter.

To manage the industry?s need of wood assortments in a optimal and cost effective way the forest companies need to have knowledge of the actual standing volume and the yield of the planned clear cuts. The mean volume of the trunk is also important since it is important for the contractors prices. Today the total volume are estimated either with Näslund (1940) or Brandels (1990) functions of volumes, and the yield is estimated with Rune Ollas (1980) function for trunks and stands. The purpose of this study has been to answer the following questions: How good is the yield forecast with data collected with currently used methods? How well can the yield forecasts became with data collected according to the instructions? How well can the yield forecast be with data collected according to the instruction and calculated with the program Aptan for theoretical bucking? The study has been initiated and financed by SCA Skog AB.The material consisted of a number of randomly selected objects ready for clear cut.

I Norrbotten produceras tall, gran och björk, vilka den senaste tiden har stått inför en hård konkurrens, eftersom träslagen är ljusa till färgen och därför blivit omoderna. I Finland finns en teknik som genom att värmebehandla virke i upphettad ånga, förändrar egenskaperna hos virket, som t.ex. dess färg, dimensionsstabilitet och beständighet. Då infinner sig frågan om våra träslag, med förändrade egenskaper, kan konkurrera med importerat ädelträ, impregnerat trä och de svenska mörka träslagen som ek och valnöt? Uppdraget är att ta reda på hur man producerar värmebehandlat trä (VBT).

The work presented in this report is written at IEIs department on Linköping Institute of Technology. The report aims to increase the assembly efficiency at Wigells AB. The report shall be used as a guide for the implementation of changes at other workstations in the company. Together with Träcentrum in Nässjö, Wigells AB has identified the needs of this study and contacted IEI at Linköping Institute of Technology.In order to implement an efficient assembly line at the company, studies on lean production have been made. This theory has been studied and together with our own views and findings at the company we have analyzed the assembly area.Wigells is a small company that manufactures wood furniture.